gpio1 and gpio7 on the tps65930 are used as outputs on the devkit8000.
Remove them from the pu/pd configuration.
Signed-off-by: Daniel Morsing <daniel.morsing@xxxxxxxxx>
---
arch/arm/mach-omap2/board-devkit8000.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 864a08f..8dc7a24 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -265,9 +265,8 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
- .pullups = BIT(1),
- .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
- | BIT(15) | BIT(16) | BIT(17),
+ .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(15)
+ | BIT(16) | BIT(17),
.setup = devkit8000_twl_gpio_setup,
};
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
