Am 21.12.2010 08:47, schrieb Daniel Morsing: > The display reset lines are connected to a TPS65930 which may sleep > when changing GPIO values. Use the appropriate function to silence > a nasty warning from gpiolib. > > Signed-off-by: Daniel Morsing <daniel.morsing@xxxxxxxxx> > --- > arch/arm/mach-omap2/board-devkit8000.c | 8 ++++---- > 1 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-devkit8000.c > b/arch/arm/mach-omap2/board-devkit8000.c > index 53ac762..f1f58f5 100644 > --- a/arch/arm/mach-omap2/board-devkit8000.c > +++ b/arch/arm/mach-omap2/board-devkit8000.c > @@ -118,27 +118,27 @@ static int devkit8000_panel_enable_lcd(struct > omap_dss_device *dssdev) > twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0); > > if (gpio_is_valid(dssdev->reset_gpio)) > - gpio_set_value(dssdev->reset_gpio, 1); > + gpio_set_value_cansleep(dssdev->reset_gpio, 1); > return 0; > } > > static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev) > { > if (gpio_is_valid(dssdev->reset_gpio)) > - gpio_set_value(dssdev->reset_gpio, 0); > + gpio_set_value_cansleep(dssdev->reset_gpio, 0); > } > > static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev) > { > if (gpio_is_valid(dssdev->reset_gpio)) > - gpio_set_value(dssdev->reset_gpio, 1); > + gpio_set_value_cansleep(dssdev->reset_gpio, 1); > return 0; > } > > static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) > { > if (gpio_is_valid(dssdev->reset_gpio)) > - gpio_set_value(dssdev->reset_gpio, 0); > + gpio_set_value_cansleep(dssdev->reset_gpio, 0); > } > > static struct regulator_consumer_supply devkit8000_vmmc1_supply = Hello Daniel, Your patch is destroyed by gmail. Please read Documentation/email-clients.txt I have the same patch on my list. So you can add an Acked-by: Thomas Weber <weber@xxxxxxxxxxxxx> Regards, Thomas -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html