Commmit 60d24ee "Added video data to support tvout on rx51" broke the DSS on RX51/N900 since it added DSS VENC support but a patch adding needed supply is missing from tree and no framebuffers are initialized. This patch is basically cleaned up version of original one: http://marc.info/?l=linux-omap&m=129070041402418&w=2 Signed-off-by: Jarkko Nikula <jhnikula@xxxxxxxxx> Cc: Srikar <ext-srikar.1.bhavanarayana@xxxxxxxxx> Cc: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx> --- Mark cc'edd since he had comments to the original patch what this patch is trying to address. --- arch/arm/mach-omap2/board-rx51-peripherals.c | 11 +++++++++-- 1 files changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 768f0dc..e75e240 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -363,6 +363,10 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), }; +static struct regulator_consumer_supply rx51_vdac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss"), +}; + static struct regulator_init_data rx51_vaux1 = { .constraints = { .name = "V28", @@ -480,14 +484,17 @@ static struct regulator_init_data rx51_vsim = { static struct regulator_init_data rx51_vdac = { .constraints = { + .name = "VDAC", .min_uV = 1800000, .max_uV = 1800000, + .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE + .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = 1, + .consumer_supplies = rx51_vdac_supply, }; static struct regulator_init_data rx51_vio = { -- 1.7.2.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html