Linux for Texus Instruments OMAP Processors
[Prev Page][Next Page]
- Re: [PATCH 0/9] TI DMM-TILER driver
- From: David Sin <davidsin@xxxxxx>
- Re: [PATCH 0/9] TI DMM-TILER driver
- From: David Sin <davidsin@xxxxxx>
- Re: [OMAP 1710] Mainline Broken
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] ARM: ensure all sched_clock() implementations are notrace marked
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling
- From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
- Re: [PATCH v1] OMAP: GPIO: Correct IP version message during boot
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] OMAP4: PM: Use the low-power state change feature on OMAP4
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: pm-core broken
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH] ARM: ensure all sched_clock() implementations are notrace marked
- From: Rabin Vincent <rabin@xxxxxx>
- Re: pm-core broken
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH] ARM: ensure all sched_clock() implementations are notrace marked
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [Patch v4] AM35xx: Craneboard: Add USB EHCI support
- From: srinath@xxxxxxxxxxxxxxxxxxxx
- Re: [OMAP 1710] Mainline Broken
- From: Belisko Marek <marek.belisko@xxxxxxxxx>
- [OMAP 1710] Mainline Broken
- From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
- Re: [PATCH] ARM: ensure all sched_clock() implementations are notrace marked
- From: Rabin Vincent <rabin@xxxxxx>
- Re: [GIT PULL] OMAP DSS fixes for next rc
- From: Paul Mundt <lethal@xxxxxxxxxxxx>
- Re: [PATCH v4 4/5] OMAP: mailbox: build device using omap_device/omap_hwmod
- From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
- Re: [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling
- From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
- [PATCH v1] OMAP: GPIO: Correct IP version message during boot
- From: "Varadarajan, Charulatha" <charu@xxxxxx>
- Re: [PATCH 0/9] TI DMM-TILER driver
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 0/13] 64-bit sched_clock
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 01/13] ARM: sched_clock: provide common infrastructure for sched_clock()
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [PATCH v2 1/5] OMAP4: PM: Use the low-power state change feature on OMAP4
- From: Rajendra Nayak <rnayak@xxxxxx>
- [PATCH v2 2/5] OMAP4: PM: Do not assume clkdm supports hw transitions
- From: Rajendra Nayak <rnayak@xxxxxx>
- Re: [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion
- From: Govindraj <govindraj.ti@xxxxxxxxx>
- RE: [PATCH v6 0/12] dmtimer adaptation to platform_driver
- From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
- Re: [PATCH v2] OMAP3: PM: PRCM interrupt: Fix warning "MPU wakeup but no wakeup sources"
- From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
- [PATCH 10/13] ARM: omap: convert sched_clock() to use new infrastructure
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [PATCH 01/13] ARM: sched_clock: provide common infrastructure for sched_clock()
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [PATCH 0/13] 64-bit sched_clock
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: twl4030_usb porting advice
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v4 4/5] OMAP: mailbox: build device using omap_device/omap_hwmod
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 4/5] OMAP: mailbox: build device using omap_device/omap_hwmod
- From: "Varadarajan, Charulatha" <charu@xxxxxx>
- Re: [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling
- From: "Varadarajan, Charulatha" <charu@xxxxxx>
- [PATCH] ARM: ensure all sched_clock() implementations are notrace marked
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- [PATCH v4 0/5] omap: mailbox: hwmod support
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH v4 3/5] OMAP4: hwmod data: add mailbox data
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH v4 4/5] OMAP: mailbox: build device using omap_device/omap_hwmod
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH v4 2/5] OMAP3: hwmod data: add mailbox data
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH v4 1/5] OMAP2: hwmod data: add mailbox data
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- RE: pm-core broken
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- pm-core broken
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 3/5 v3] OMAP3630: PM: Erratum i608: disable RTA
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/5] OMAP4: PM: Use the lowpwrstatechange feature on OMAP4
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] west bridge device driver changes to use gpmc configuration functions
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH] west bridge device driver changes to use gpmc configuration functions
- From: Sutharsan <srmt@xxxxxxxxxxx>
- [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH 3/5 v3] OMAP3630: PM: Erratum i608: disable RTA
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 0/5 v3] OMAP: idle path errata fixes
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 2/2] arm: mach-omap2: Kconfig: devkit8000 should select needed options
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: UbiFS + HWECC(?) + BeagleBoard = fail
- From: Charles Manning <manningc2@xxxxxxxxxxxxx>
- Re: [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 13/14] OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
- From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
- Re: [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 4/9] OMAP2430: hwmod data: add system DMA
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- Re: [PATCH v1 3/9] OMAP2420: hwmod data: add system DMA]
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: [PATCH] OMAP: pm.c correct the initcall for an early init.
- From: "Gopinath, Thara" <thara@xxxxxx>
- [GIT PULL] OMAP DSS fixes for next rc
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- RE: [PATCH 1/5] OMAP4: PM: Use the lowpwrstatechange feature on OMAP4
- From: Rajendra Nayak <rnayak@xxxxxx>
- Re: [PATCH v1 4/9] OMAP2430: hwmod data: add system DMA
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] OMAP: DSS2: Fix build breaks for rfbi.c and dsi.c
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- Re: [PATCH] OMAP: omap_device: use pdev as parameter to get rt_va
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH v2 6/6] OMAP4: hwmod data: Add SIDLE_SMART_WKUP modes to several IPs
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 5/6] OMAP2+: hwmod: Add wakeup support for new OMAP4 IPs
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 3/6] OMAP2+: hwmod: Remove omap_hwmod_mutex
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 4/6] OMAP2+: hwmod: Disable clocks when hwmod enable fails
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 2/6] OMAP2+: hwmod: Mark functions used only during initialization with __init
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 1/6] OMAP2+: hwmod: Make omap_hwmod_register private and remove omap_hwmod_unregister
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 0/6] OMAP: hwmod core fix and cleanup for 2.6.38
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH] MTD: NAND: ams-delta: drop omap_read/write, use ioremap
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- Re: [PATCH v7] OMAP4:keypad: PM runtime
- From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
- [PATCH v2 6/7] OMAP2+: omap_hwmod: fix wakeup enable/disable for consistency
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 5/7] OMAP4: hwmod & clock data: Fix GPIO opt_clks and ocp_if iclk
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 7/7] OMAP2430: hwmod data: Use common dev_attr for i2c1 and i2c2
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 3/7] OMAP4: hwmod data: Fix missing address in DMM and EMIF_FW
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 4/7] OMAP4: hwmod data: Add IVA and DSP
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 2/7] OMAP4: hwmod data: Add SYSS_HAS_RESET_STATUS flag
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 1/7] OMAP4: hwmod data: Fix hwmod entries order
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 0/7] OMAP4: hwmod data fixes and update
- From: Benoit Cousson <b-cousson@xxxxxx>
- Re: [PATCH 1/5] OMAP4: hwmod data: Fix hwmod entries order
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- Re: twl4030_usb porting advice
- From: Tomasz Mloduchowski <tomasz.mloduchowski@xxxxxxxxx>
- Re: [PATCH 0/5] omap: dsp: fixes for 2.6.37-rc1
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- [PATCH 2/2] arm: mach-omap2: Kconfig: devkit8000 should select needed options
- From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
- [PATCH 1/2] arm: mach-omap2: Kconfig: fix incorrect option
- From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
- [PATCH] arm: mach-omap2: hsmmc_reset: fix clk_get() error handling
- From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
- Re: [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- Re: twl4030_usb porting advice
- From: Felipe Balbi <balbi@xxxxxx>
- Re: twl4030_usb porting advice
- From: Tomasz Mloduchowski <tomasz.mloduchowski@xxxxxxxxx>
- Re: [PATCH 13/14] OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [PATCH v1 3/9] OMAP2420: hwmod data: add system DMA]
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- Re: twl4030_usb porting advice
- From: Felipe Balbi <balbi@xxxxxx>
- twl4030_usb porting advice
- From: Tomasz Mloduchowski <tomasz.mloduchowski@xxxxxxxxx>
- [PATCH] MTD: NAND: ams-delta: select for built-in by default
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- RE: [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- RE: [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two
- From: Rajendra Nayak <rnayak@xxxxxx>
- RE: [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions
- From: Rajendra Nayak <rnayak@xxxxxx>
- Re: [PATCH v1 3/9] OMAP2420: hwmod data: add system DMA
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- Re: [PATCH v1 4/9] OMAP2430: hwmod data: add system DMA
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- Re: [PATCH v2] MTD: NAND: ams-delta: convert to platform driver
- From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
- Re: [PATCH v7] OMAP4:keypad: PM runtime
- From: "Varadarajan, Charulatha" <charu@xxxxxx>
- Re: [PATCH] OMAP: omap_device: use pdev as parameter to get rt_va
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 05/12] staging:tidspbridge - set5 remove hungarian from structs
- From: Dan Carpenter <error27@xxxxxxxxx>
- Re: [PATCH v7] OMAP4:keypad: PM runtime
- From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
- Re: [PATCH 4/7] OMAP2/3: GPMC: put sync_clk value in picoseconds instead of nanoseconds
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- RE: [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [PATCH 0/5] omap: dsp: fixes for 2.6.37-rc1
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 10/11] OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 09/11] OMAP2+: clockdomain: move header file from plat-omap to mach-omap2
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 10/11] OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v7] OMAP4:keypad: PM runtime
- From: "Varadarajan, Charulatha" <charu@xxxxxx>
- RE: [PATCH v5 0/12] dmtimer adaptation to platform_driver
- From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
- Re: [PATCH 13/14] OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: UbiFS + HWECC(?) + BeagleBoard = fail
- From: Charles Manning <manningc2@xxxxxxxxxxxxx>
- [PATCH v7] OMAP4:keypad: PM runtime
- From: Shubhrajyoti D <a0393217@xxxxxxxxxxxx>
- Re: [PATCH 6/8] OMAP2+: hwmod: upgrade per-hwmod mutex to a spinlock
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] OMAP2+: omap_hwmod: fix wakeup enable/disable for consistency
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH/RFC 3/2] OMAP: PM noop: implement context loss count for non-omap_devices
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCHv7 0/4] omap: iovmm - fixes for iovmm module
- From: "Guzman Lugo, Fernando" <fernando.lugo@xxxxxx>
- Re: [PATCH/RFC 2/2] OMAP: PM: implement context loss count APIs
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 3/3] omap2+: Initialize omap_irq_base for entry-macro.Sfrom platform code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH/RFC 1/2] OMAP2+: powerdomain: add API to get context loss count
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH] OMAP: DSS2: Fix build breaks for rfbi.c and dsi.c
- From: Archit Taneja <archit@xxxxxx>
- Re: [PATCH v2] musb: am35x: fix compile error due to control apis
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v1 7/9] OMAP1: DMA: Implement in platform device model
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v1 4/9] OMAP2430: hwmod data: add system DMA
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v1 3/9] OMAP2420: hwmod data: add system DMA
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v5 0/12] dmtimer adaptation to platform_driver
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 7/9] OMAP1: DMA: Implement in platform device model
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- Re: [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- Re: [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv7 0/4] omap: iovmm - fixes for iovmm module
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 05/12] OMAP4: PRCM: Add SCRM header file
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 05/12] OMAP4: PRCM: Add SCRM header file
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] OMAP: omap_device: use pdev as parameter to get rt_va
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 5/5] OMAP4: hwmod & clock data: Fix GPIO opt_clks and ocp_if iclk
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 1/5] OMAP4: hwmod data: Fix hwmod entries order
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 0/5] OMAP4: hwmod data fixes and update
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v1 7/9] OMAP1: DMA: Implement in platform device model
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v1 7/9] OMAP1: DMA: Implement in platform device model
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCHv7 0/4] omap: iovmm - fixes for iovmm module
- From: Fernando Guzman Lugo <fernando.lugo@xxxxxx>
- [PATCHv7 1/4] omap: iovmm - no gap checking for fixed address
- From: Fernando Guzman Lugo <fernando.lugo@xxxxxx>
- [PATCHv7 3/4] omap: iovmm - replace __iounmap with iounmap
- From: Fernando Guzman Lugo <fernando.lugo@xxxxxx>
- [PATCHv7 2/4] omap: iovmm - add superpages support to fixed da address
- From: Fernando Guzman Lugo <fernando.lugo@xxxxxx>
- [PATCHv7 4/4] omap: iommu - create new api to set valid da range
- From: Fernando Guzman Lugo <fernando.lugo@xxxxxx>
- Re: [PATCH v1 7/9] OMAP1: DMA: Implement in platform device model
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP: omap_device: use pdev as parameter to get rt_va
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [alsa-devel] [RFC/PATCH v6 03/12] media: Entities, pads and links
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3] OMAP3: clean up ASM idle code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] MTD: NAND: ams-delta: convert to platform driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv6 4/4] omap: iommu - create new api to set valid da range
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- [PATCH 00/12]staging:tidspbridge - Remove hungarian notation from structures
- From: Rene Sapiens <rene.sapiens@xxxxxx>
- [PATCH 03/12] staging:tidspbridge - set3 remove hungarian from structs
- From: Rene Sapiens <rene.sapiens@xxxxxx>
- [PATCH 07/12] staging:tidspbridge - set7 remove hungarian from structs
- From: Rene Sapiens <rene.sapiens@xxxxxx>
- [PATCH 09/12] staging:tidspbridge - set9 remove hungarian from structs
- From: Rene Sapiens <rene.sapiens@xxxxxx>
- [PATCH 10/12] staging:tidspbridge - set10 remove hungarian from structs
- From: Rene Sapiens <rene.sapiens@xxxxxx>
- [PATCH 06/12] staging:tidspbridge - set6 remove hungarian from structs
- From: Rene Sapiens <rene.sapiens@xxxxxx>
- [PATCH 01/12] staging:tidspbridge - set1 remove hungarian from structs
- From: Rene Sapiens <rene.sapiens@xxxxxx>
- [PATCH 02/12] staging:tidspbridge - set2 remove hungarian from structs
- From: Rene Sapiens <rene.sapiens@xxxxxx>
- [PATCH 04/12] staging:tidspbridge - set4 remove hungarian from structs
- From: Rene Sapiens <rene.sapiens@xxxxxx>
- [PATCH 12/12] staging:tidspbridge - set12 remove hungarian from structs
- From: Rene Sapiens <rene.sapiens@xxxxxx>
- [PATCH 05/12] staging:tidspbridge - set5 remove hungarian from structs
- From: Rene Sapiens <rene.sapiens@xxxxxx>
- [PATCH 11/12] staging:tidspbridge - set11 remove hungarian from structs
- From: Rene Sapiens <rene.sapiens@xxxxxx>
- [PATCH v2] MTD: NAND: ams-delta: convert to platform driver
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- Re: [PATCH 05/12] OMAP4: PRCM: Add SCRM header file
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- Re: [PATCH 00/12] OMAP: clock/SRAM: patches for 2.6.38, part one
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/5] OMAP4: PM: Do not assume clkdm supports hw transitions
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/5] OMAP3&4: Fixes in setup/suspend/powerdomain
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/5] OMAP4: PM: Use the lowpwrstatechange feature on OMAP4
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCHv6 4/4] omap: iommu - create new api to set valid da range
- From: "Guzman Lugo, Fernando" <fernando.lugo@xxxxxx>
- Re: Mainline OMAP3 breakage (and other OMAP?)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Thermal issues with OMAP35x on Logic Torpedo module
- From: Peter Barada <peter.barada@xxxxxxxxx>
- Re: [PATCH v3 0/4] Introduce hardware spinlock framework
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Re: [PATCH 05/12] OMAP4: PRCM: Add SCRM header file
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 0/5] ARM: GIC: cleanup
- From: Abhijeet Dharmapurikar <adharmap@xxxxxxxxxxxxxx>
- Re: [PATCH 0/4] omap: iovmm - fixes for iovmm module
- From: "Guzman Lugo, Fernando" <fernando.lugo@xxxxxx>
- Re: [PATCH] OMAP3: clean up ASM idle code
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- [PATCH v3] OMAP3: clean up ASM idle code
- From: jean.pihet@xxxxxxxxxxxxxx
- Re: [PATCH v7] OMAP4:keypad: PM runtime
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCHv4 4/7] HSI: hsi_char: Add HSI char device driver
- From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
- Re: [PATCH v3 0/4] Introduce hardware spinlock framework
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH v2] OMAP3: clean up ASM idle code
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- [PATCH v6 1/12] OMAP2+: dmtimer: add device names to flck nodes
- From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
- [PATCH v6 7/12] OMAP2+: dmtimer: convert to platform devices
- From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
- [PATCH v6 6/12] OMAP1: dmtimer: conversion to platform devices
- From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
- [PATCH v6 3/12] OMAP2430: hwmod data: add dmtimer
- From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
- [PATCH v6 8/12] OMAP: dmtimer: platform driver
- From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
- [PATCH v6 12/12] OMAP2: dmtimer: set wakeup enable explicitly in plat
- From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
- [PATCH v6 5/12] OMAP4: hwmod data: add dmtimer
- From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
- [PATCH v6 11/12] OMAP: dmtimer: add timeout to low-level routines
- From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
- [PATCH v6 9/12] OMAP: dmtimer: switch-over to platform device driver
- From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
- [PATCH v6 10/12] OMAP: dmtimer: pm_runtime support
- From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
- [PATCH v6 4/12] OMAP3: hwmod data: add dmtimer
- From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
- [PATCH v6 2/12] OMAP2420: hwmod data: add dmtimer
- From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
- [PATCH v6 0/12] dmtimer adaptation to platform_driver
- From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
- Re: [PATCH] MTD: NAND: ams-delta: convert to platform driver
- From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
- [PATCH v7] OMAP4:keypad: PM runtime
- From: Shubhrajyoti D <a0393217@xxxxxxxxxxxx>
- Re: [alsa-devel] [RFC/PATCH v6 03/12] media: Entities, pads and links
- From: Clemens Ladisch <clemens@xxxxxxxxxx>
- [PATCH v7] Enable Runtime PM functionality in OMAP4 driver based on the following assumptions:
- From: shubhrajyoti@xxxxxx
- Re: [PATCH 0/4] omap: iovmm - fixes for iovmm module
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [PATCHv6 4/4] omap: iommu - create new api to set valid da range
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [alsa-devel] [RFC/PATCH v6 03/12] media: Entities, pads and links
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [alsa-devel] [RFC/PATCH v6 03/12] media: Entities, pads and links
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: [alsa-devel] [RFC/PATCH v6 03/12] media: Entities, pads and links
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38,part two
- From: Rajendra Nayak <rnayak@xxxxxx>
- Re: [PATCH v3 0/4] Introduce hardware spinlock framework
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Re: [PATCH] ARM: OMAP: Power on EHCI, serial, camera and DVI on beagleboard-xM
- From: Anand Gadiyar <gadiyar@xxxxxx>
- Re: [alsa-devel] [RFC/PATCH v6 03/12] media: Entities, pads and links
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- RE: [PATCH v2 01/17] OMAP2420: hwmod data: add DSS DISPC RFBI VENC
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP: Power on EHCI, serial, camera and DVI on beagleboard-xM
- From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 05/12] OMAP4: PRCM: Add SCRM header file
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- Re: [alsa-devel] [RFC/PATCH v6 03/12] media: Entities, pads and links
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH 0/3] OMAP: Introduce Backlight driver for Sharp LS037V7DW01 LCD panel
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- Re: [alsa-devel] [RFC/PATCH v6 03/12] media: Entities, pads and links
- From: Clemens Ladisch <clemens@xxxxxxxxxx>
- Re: [alsa-devel] [RFC/PATCH v6 03/12] media: Entities, pads and links
- From: Clemens Ladisch <clemens@xxxxxxxxxx>
- [PATCH] OMAP3: PM: Fix CLK_SRC mask for IVA2 and MPU
- From: Rajendra Nayak <rnayak@xxxxxx>
- [PATCHv6 1/4] omap: iovmm - no gap checking for fixed address
- From: Fernando Guzman Lugo <fernando.lugo@xxxxxx>
- [PATCHv6 2/4] omap: iovmm - add superpages support to fixed da address
- From: Fernando Guzman Lugo <fernando.lugo@xxxxxx>
- [PATCHv6 3/4] omap: iovmm - replace __iounmap with iounmap
- From: Fernando Guzman Lugo <fernando.lugo@xxxxxx>
- [PATCHv6 4/4] omap: iommu - create new api to set valid da range
- From: Fernando Guzman Lugo <fernando.lugo@xxxxxx>
- [PATCH 0/4] omap: iovmm - fixes for iovmm module
- From: Fernando Guzman Lugo <fernando.lugo@xxxxxx>
- Re: [alsa-devel] [RFC/PATCH v6 03/12] media: Entities, pads and links
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: OMAP4 build error - omapfb
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- Re: [alsa-devel] [RFC/PATCH v6 03/12] media: Entities, pads and links
- From: "Hans Verkuil" <hverkuil@xxxxxxxxx>
- Re: Mainline OMAP3 breakage (and other OMAP?)
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- Re: [alsa-devel] [RFC/PATCH v6 03/12] media: Entities, pads and links
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RFC PATCHv4 4/7] HSI: hsi_char: Add HSI char device driver
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH] OMAP3: clean up ASM idle code
- From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
- Re: Fwd: possible errors in linux omap display headers - who would be a good person to contact?
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- [RFC PATCHv4 1/7] HSI: hsi: Introducing HSI framework
- From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
- [RFC PATCHv4 3/7] HSI: omap_ssi: Add OMAP SSI to the kernel configuration
- From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
- [RFC PATCHv4 2/7] HSI: omap_ssi: Introducing OMAP SSI driver
- From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
- [RFC PATCHv4 0/7] HSI framework and drivers
- From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
- [RFC PATCHv4 6/7] HSI: Add HSI API documentation
- From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
- [RFC PATCHv4 7/7] HSI: hsi_char: Update ioctl-number.txt
- From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
- [RFC PATCHv4 4/7] HSI: hsi_char: Add HSI char device driver
- From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
- [RFC PATCHv4 5/7] HSI: hsi_char: Add HSI char device kernel configuration
- From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
- Re: [PATCH] OMAP3: clean up ASM idle code
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- Re: [REPOST][PATCH] Fix IGEPv2 second MMC channel power supply
- From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
- RE: [PATCH 00/12] OMAP: clock/SRAM: patches for 2.6.38, part one
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- RE: [PATCH 00/12] OMAP: clock/SRAM: patches for 2.6.38, part one
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: [PATCH 00/12] OMAP: clock/SRAM: patches for 2.6.38, part one
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [PATCH v5 0/12] dmtimer adaptation to platform_driver
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 0/5] OMAP3&4: Fixes in setup/suspend/powerdomain
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 02/12] OMAP3: clock data: Add "wkup_clkdm" in sr1_fck and sr2_fck
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 12/12] OMAP1: clock_data: use runtime cpu / machine checks
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 09/12] OMAP3: clock: clarify usage of struct clksel_rate.flags and struct omap_clk.cpu
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 11/12] OMAP2/3: SRAM: add comment about crashes during a TLB miss
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 10/12] OMAP3: clock: fix incorrect rate display when switching MPU rate at boot
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 08/12] OMAP2xxx clock: fix dss2_fck recalc to use clksel
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 03/12] OMAP4: clock data: Add missing DPLL x2 clock nodes
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 04/12] OMAP4: clock data: Add missing fields in iva_hsd_byp_clk_mux_ck
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 07/12] OMAP4: clock data: Export control to enable/disable CORE/PER M3 clocks
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 01/12] OMAP4: clock data: Add control for pad_clks_ck and slimbus_clk
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 05/12] OMAP4: PRCM: Add SCRM header file
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 06/12] OMAP4: clock data: Add SCRM auxiliary clock nodes
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 00/12] OMAP: clock/SRAM: patches for 2.6.38, part one
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: [PATCH v2 01/17] OMAP2420: hwmod data: add DSS DISPC RFBI VENC
- From: "Guruswamy, Senthilvadivu" <svadivu@xxxxxx>
- RE: [PATCH 0/5] omap4: l2x0 fixes and cleanup
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [PATCH] OMAP3: clean up ASM idle code
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] staging: tidspbridge: rmgr/node.c code cleanup
- From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
- OMAP Tutorial Hour - Introduction to USB on OMAP
- From: Geetha T <gt20099@xxxxxxxxx>
- Re: [PATCH] staging: tidspbridge: use the right type for list_is_last
- From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
- Re: [PATCH 0/5 v3] OMAP: idle path errata fixes
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/5 v3] OMAP3630: PM: Erratum i608: disable RTA
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 6/6] omap2+: Initialize serial ports for wake-up events for n8x0
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/5] OMAP4: hwmod data: Fix hwmod entries order
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 0/12] dmtimer adaptation to platform_driver
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7] OMAP2+: PM: omap device: API's for handling mstandby mode
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- Re: [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38
- From: "Guzman Lugo, Fernando" <fernando.lugo@xxxxxx>
- Re: [PATCH] OMAP: pm.c correct the initcall for an early init.
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38
- From: "Guzman Lugo, Fernando" <fernando.lugo@xxxxxx>
- [PATCH 5/5] OMAP4: clock data: Keep L3INSTR clock domain modulemode under HW control
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH 3/5] OMAP4: powerdomain: l4per pwrdm does not support OFF
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH 2/5] OMAP4: PM: Do not assume clkdm supports hw transitions
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH 4/5] OMAP4: powerdomain: Remove L3INIT_PD OFF state
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH 1/5] OMAP4: PM: Use the lowpwrstatechange feature on OMAP4
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH 0/5] OMAP3&4: Fixes in setup/suspend/powerdomain
- From: Benoit Cousson <b-cousson@xxxxxx>
- Re: Inconsistent lock state caused by omap_mbox_msg_send() called from tidspbridge
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: Inconsistent lock state caused by omap_mbox_msg_send() called from tidspbridge
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Re: [REPOST][PATCH] Fix IGEPv2 second MMC channel power supply
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH/RFC 2/2] OMAP: PM: implement context loss count APIs
- From: Paul Walmsley <paul@xxxxxxxxx>
- [GIT PULL] omap fixes for v2.6.37-rc5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 11/24] ARM: omap: update clock source registration
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [PATCH 0/24] Update clocksource registration
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH] arm: omap: update mach-types for rm680
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 5/5] OMAP: mailbox: add omap_device latency information
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH] OMAP: omap_device: use pdev as parameter to get rt_va
- From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
- Re: [PATCH 0/5] ARM: GIC: cleanup
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH 0/5] ARM: GIC: cleanup
- From: Abhijeet Dharmapurikar <adharmap@xxxxxxxxxxxxxx>
- Re: [PATCH 7/9] TILER-DMM: Main TILER driver implementation
- From: David Sin <davidsin@xxxxxx>
- OMAP3 DSP baseimage with SYS_printf support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [REPOST][PATCH] Fix IGEPv2 second MMC channel power supply
- From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
- Re: Inconsistent lock state caused by omap_mbox_msg_send() called from tidspbridge
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [alsa-devel] [RFC/PATCH v6 03/12] media: Entities, pads and links
- From: Clemens Ladisch <clemens@xxxxxxxxxx>
- Re: [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: [PATCH 2/2] omap3: igepv2: LED gpio-led:green:d1 is active low
- From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
- Re: [PATCH v5 10/12] OMAP: dmtimer: switch-over to platform device driver
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Nishanth Menon <nm@xxxxxx>
- RE: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
- Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Nishanth Menon <nm@xxxxxx>
- RE: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
- RE: [PATCH] OMAP3: clean up ASM idle code
- From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
- RE: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
- Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Nishanth Menon <nm@xxxxxx>
- RE: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Nishanth Menon <nm@xxxxxx>
- RE: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
- Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Nishanth Menon <nm@xxxxxx>
- RE: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
- RE: [PATCH/RFC 2/2] OMAP: PM: implement context loss count APIs
- From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
- Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Nishanth Menon <nm@xxxxxx>
- RE: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
- From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
- Re: [PATCH v2 4/8] OMAP4: clock data: Add missing fields in iva_hsd_byp_clk_mux_ck
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- RE: [PATCH 3/3] omap2+: Initialize omap_irq_base for entry-macro.Sfrom platform code
- From: Rajendra Nayak <rnayak@xxxxxx>
- RE: [PATCH v2 01/17] OMAP2420: hwmod data: add DSS DISPC RFBI VENC
- From: "Guruswamy, Senthilvadivu" <svadivu@xxxxxx>
- Re: linux-next: manual merge of the trivial tree with the omap tree
- From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
- [PATCH] arm: omap: update mach-types for rm680
- From: Anand Gadiyar <gadiyar@xxxxxx>
- RE: [PATCH/RFC 2/2] OMAP: PM: implement context loss count APIs
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: How to change freq of mmc2_clk to 48Mhz for OMAP35xx
- From: Paul Walmsley <paul@xxxxxxxxx>
- musb (omap3) as host fails with reconnecting devices
- From: Alexander Holler <holler@xxxxxxxxxxxxx>
- Re: linux-next: manual merge of the trivial tree with the omap tree
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH] OMAP1: clock_data: use runtime cpu / machine checks
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 1/2] omap3: igepv2: Don't call gpio_set_value right after gpio_direction_output
- From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
- Re: [PATCH v3 5/5] OMAP: mailbox: add omap_device latency information
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- Re: Problem trying to measure OMAP35x core temperature
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- Re: [PATCH] OMAP: omap_device: use pdev as parameter to get rt_va
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- Re: [PATCH 1/3] omap4: Add platform changes for Ambient Light sensor
- From: "Hemanth V" <hemanthv@xxxxxx>
- linux-next: manual merge of the trivial tree with the omap tree
- From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
- [PATCH 2/2] omap3: igepv2: LED gpio-led:green:d1 is active low
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 1/2] omap3: igepv2: Don't call gpio_set_value right after gpio_direction_output
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH 0/2] Misc LED-related IGEPv2 patches
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH] staging: tidspbridge: use the right type for list_is_last
- From: Ionut Nicu <ionut.nicu@xxxxxxxxxx>
- Re: Inconsistent lock state caused by omap_mbox_msg_send() called from tidspbridge
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Re: [PATCH 1/2] staging: tidspbridge: rmgr/node.c code cleanup
- From: Ionut Nicu <ionut.nicu@xxxxxxxxxx>
- Re: Inconsistent lock state caused by omap_mbox_msg_send() called from tidspbridge
- From: Ionut Nicu <ionut.nicu@xxxxxxxxxx>
- Re: [PATCH 2/9 v3] usb: musb: Remove board_data parameter from musb_platform_init()
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- [PATCH] dspbridge: Fix atoi to support hexadecimal numbers correctly
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: Inconsistent lock state caused by omap_mbox_msg_send() called from tidspbridge
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Inconsistent lock state caused by omap_mbox_msg_send() called from tidspbridge
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH] staging: tidspbridge: use the right type for list_is_last
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: mmc1: error -110 whilst initialising SDIO card
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Problem trying to measure OMAP35x core temperature
- From: Peter Barada <peterb@xxxxxxxxxxx>
- [PATCH] OMAP1: clock_data: use runtime cpu / machine checks
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- mmc1: error -110 whilst initialising SDIO card
- From: Elvis Dowson <elvis.dowson@xxxxxxx>
- RE: [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- RE: [PATCH/RFC 2/2] OMAP: PM: implement context loss count APIs
- From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
- Re: [PATCH 5/5 v5] usb: musb: Using runtime pm APIs for musb.
- From: "Kalliguddi, Hema" <hemahk@xxxxxx>
- Re: [PATCH 8/8] arm: omap: add minimal support for RM-680
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v3 4/5] OMAP: mailbox: build device using omap_device/omap_hwmod
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH v3 5/5] OMAP: mailbox: add omap_device latency information
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH v3 3/5] OMAP4: hwmod data: add mailbox data
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH v3 1/5] OMAP2: hwmod data: add mailbox data
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH v3 0/5] omap: mailbox: hwmod support
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH v3 2/5] OMAP3: hwmod data: add mailbox data
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- RE: [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: [PATCH v2 3/6] TI816X: Update common OMAP machine specific sources
- From: "Pedanekar, Hemant" <hemantp@xxxxxx>
- Re: [PATCH v2 3/6] TI816X: Update common OMAP machine specific sources
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 05/11] OMAP2+: clockdomains: split the clkdm hwsup enable/disable function
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: [PATCH v2 3/6] TI816X: Update common OMAP machine specific sources
- From: "Pedanekar, Hemant" <hemantp@xxxxxx>
- Re: [PATCH/RFC 2/2] OMAP: PM: implement context loss count APIs
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 4/8] OMAP4: clock data: Add missing fields in iva_hsd_byp_clk_mux_ck
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH] OMAP: omap_device: use pdev as parameter to get rt_va
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- Re: Corrupted LCML messages using DSP Bridge on Gumstix
- From: argon design <argondsgn@xxxxxxxxx>
- Re: [PATCH 2/9 v3] usb: musb: Remove board_data parameter from musb_platform_init()
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- Re: Corrupted LCML messages using DSP Bridge on Gumstix
- From: Nishanth Menon <nm@xxxxxx>
- Corrupted LCML messages using DSP Bridge on Gumstix
- From: argon design <argondsgn@xxxxxxxxx>
- Re: [PATCH 2/9 v3] usb: musb: Remove board_data parameter from musb_platform_init()
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH 3/3] tools, perf: Documentation for the power events API
- From: jean.pihet@xxxxxxxxxxxxxx
- [PATCH 2/3] perf: add OMAP support for the new power events
- From: jean.pihet@xxxxxxxxxxxxxx
- [PATCH 1/3] perf: add calls to suspend trace point
- From: jean.pihet@xxxxxxxxxxxxxx
- [PATCH 0/3] perf, tools: new power trace API
- From: jean.pihet@xxxxxxxxxxxxxx
- Re: [PATCH 2/9 v3] usb: musb: Remove board_data parameter from musb_platform_init()
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH 2/4] omap1: Add initcall checks for omap1 and booted board
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP: device: make rt_va easily avaialable to drivers
- From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
- Re: [PATCH] staging: tidspbridge: remove file handling functions for loader
- From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
- [PATCHv4 5/5] OMAP4: Smartreflex framework extensions
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv4 1/5] OMAP4: Register voltage PMIC parameters with the voltage layer
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv4 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv4 2/5] OMAP4: Adding voltage driver support
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv4 3/5] OMAP4: PM: Program correct init voltages for scalable VDDs
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv4 0/5] OMAP4: Smartreflex and Voltage layer support
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv5 06/10] OMAP3: PM: Adding smartreflex class3 driver
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv5 04/10] OMAP3: PM: Adding smartreflex device file.
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv5 07/10] OMAP3: PM: Adding T2 enabling of smartreflex support
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv5 02/10] OMAP: Introduce voltage domain information in the hwmod structures
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv5 01/10] OMAP3: PM: Adding voltage driver support.
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv5 08/10] OMAP3: PM: Register TWL4030 pmic info with the voltage driver.
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv5 10/10] OMAP3: PM: Program correct init voltages for VDD1 and VDD2
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv5 09/10] OMAP3: PM: Adding debug support to Voltage and Smartreflex drivers
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv5 03/10] OMAP3: PM: Adding smartreflex driver support.
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv5 05/10] OMAP3: PM: Adding smartreflex hwmod data
- From: Thara Gopinath <thara@xxxxxx>
- [PATCHv5 00/10] OMAP: Adding Smartreflex and Voltage driver support
- From: Thara Gopinath <thara@xxxxxx>
- Re: [PATCH 1/3] omap1: Use asm_irq_flags for entry-macro.S
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 12/11] omap1: Fix gpio mpuio bank to work for multi-omap for 7xx/15xx/16xx
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4] usb: musb: Adding names for IRQs in resource structure
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [RFC] add BUG_ON_MAPPABLE_NULL macro
- From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
- Re: [RFC/PATCH v6 03/12] media: Entities, pads and links
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCHv2 0/4] staging: tidspbridge - misc fixes
- From: "Guzman Lugo, Fernando" <fernando.lugo@xxxxxx>
- Re: [PATCH 1/3] omap1: Use asm_irq_flags for entry-macro.S
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- Re: [PATCH 12/11] omap1: Fix gpio mpuio bank to work for multi-omap for 7xx/15xx/16xx
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- Re: [PATCH 2/4] omap1: Add initcall checks for omap1 and booted board
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- Re: [PATCH 0/5] OMAP4: hwmod data fixes and update
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- Re: [PATCH 5/5 v5] usb: musb: Using runtime pm APIs for musb.
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 3/5 v5] OMAP4430: hwmod data: Adding USBOTG
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 5/5 v5] usb: musb: Using runtime pm APIs for musb.
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 4/5 v5] OMAP2+: musb: HWMOD adaptation for musb.
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 2/5 v5] OMAP3xxx: hwmod data: Add USBOTG
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 1/5 v5] OMAP2430: hwmod data: Add USBOTG
- From: Hema HK <hemahk@xxxxxx>
- Subject: [PATCH 0/5 v5]usb: musb: hwmod and runtime pm support for musb
- From: Hema HK <hemahk@xxxxxx>
- Re: [PATCH v4] usb: musb: Adding names for IRQs in resource structure
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 5/5 v4] usb: musb: Using runtime pm APIs for musb.
- From: "Kalliguddi, Hema" <hemahk@xxxxxx>
- Re: [PATCH v4] usb: musb: Adding names for IRQs in resource structure
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH 6/8 V3] usb: otg: TWL6030: Add twl6030_usb file for compilation
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH 4/5 v4] OMAP2+: musb: HWMOD adaptation for musb.
- From: "Kalliguddi, Hema" <hemahk@xxxxxx>
- Re: [PATCH 3/8 V3] usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver.
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH v4] usb: musb: Adding names for IRQs in resource structure
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v4] usb: musb: Adding names for IRQs in resource structure
- From: "Kalliguddi, Hema" <hemahk@xxxxxx>
- Re: [PATCH 0/8 V3] usb: otg: TWL6030: OMAP4430: musb & transceiver driver support for OMAP4
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 4/5 v4] OMAP2+: musb: HWMOD adaptation for musb.
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 5/5 v4] usb: musb: Using runtime pm APIs for musb.
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 7/8 V2] usb: musb: Adding musb support for OMAP4430
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v4] usb: musb: Adding names for IRQs in resource structure
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- [PATCH 5/5 v4] usb: musb: Using runtime pm APIs for musb.
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 4/5 v4] OMAP2+: musb: HWMOD adaptation for musb.
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 3/5 v4] OMAP4430: hwmod data: Adding USBOTG
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 2/5 v4] OMAP3xxx: hwmod data: Add USBOTG
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 1/5 v4] OMAP2430: hwmod data: Add USBOTG
- From: Hema HK <hemahk@xxxxxx>
- Subject: [PATCH 0/5 v4]usb: musb: hwmod and runtime pm support for musb
- From: Hema HK <hemahk@xxxxxx>
- Re: [PATCH 7/8 V2] usb: musb: Adding musb support for OMAP4430
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 8/8 V2] arm: OMAP4430: musb: Configure musb to OTG mode
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 7/8 V2] usb: musb: Adding musb support for OMAP4430
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 6/8 V3] usb: otg: TWL6030: Add twl6030_usb file for compilation
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 5/8 V3] mfd: TWL6030: OMAP4: Registering the TWL6030-usb device
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 4/8 V3] usb: musb: TWL6030: Selecting TWL6030_USB transceiver
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 3/8 V3] usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver.
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 2/8 V3] usb: otg: Adding twl6030-usb transceiver driver for OMAP4430
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 1/8 V3] mfd: TWL6030: USBOTG VBUS event generation on
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 0/8 V3] usb: otg: TWL6030: OMAP4430: musb & transceiver driver support for OMAP4
- From: Hema HK <hemahk@xxxxxx>
- Re: [PATCH 3/7 V2] usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver.
- From: "Kalliguddi, Hema" <hemahk@xxxxxx>
- Re: [PATCH 3/7 V2] usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver.
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 4/7 V2] mfd: TWL6030: OMAP4: Registering the TWL6030-usb device
- From: "Kalliguddi, Hema" <hemahk@xxxxxx>
- Re: [PATCHv2 0/4] staging: tidspbridge - misc fixes
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 3/7 V2] usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver.
- From: "Kalliguddi, Hema" <hemahk@xxxxxx>
- RE: [PATCH/RFC 2/2] OMAP: PM: implement context loss count APIs
- From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
- [PATCH 2/2] OMAP1: Amstrad Delta: reserve memory for camera
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- [RESEND] [PATCH 0/2] OMAP1: amsdelta: reserve memory for videobuf_contig
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- Re: [PATCH 0/2] OMAP1: amsdelta: reserve memory for videobuf_contig
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- Re: [PATCH 2/7 V2] usb: otg: Adding twl6030-usb transceiver driver for
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 5/7 V2] usb: musb: TWL6030: Selecting TWL6030_USB transceiver
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 4/7 V2] mfd: TWL6030: OMAP4: Registering the TWL6030-usb device
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 2/7 V2] usb: otg: Adding twl6030-usb transceiver driver for
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 3/7 V2] usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver.
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- Re: [PATCH] arm: omap4: panda: fix initialize musb
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 0/5] OMAP4: hwmod data fixes and update
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- RE: RFC: hwmod, iclks, auto-idle and autodeps
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 7/7 V2] arm: OMAP4430: musb: Configure musb to OTG mode
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 6/7 V2] usb: musb: Adding musb support for OMAP4430
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 5/7 V2] usb: musb: TWL6030: Selecting TWL6030_USB transceiver
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 4/7 V2] mfd: TWL6030: OMAP4: Registering the TWL6030-usb device
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 3/7 V2] usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver.
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 2/7 V2] usb: otg: Adding twl6030-usb transceiver driver for
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 1/7 V2] mfd: TWL6030: USBOTG VBUS event generation on
- From: Hema HK <hemahk@xxxxxx>
- [PATCH 0/7 V2] usb: otg: TWL6030: OMAP4430: musb & transceiver driver support for OMAP4
- From: Hema HK <hemahk@xxxxxx>
- RE: [PATCH 2/2] ARM: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- RE: [PATCH 1/2] ARM: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- Re: [PATCH v4] usb: musb: Adding names for IRQs in resource structure
- From: "Kalliguddi, Hema" <hemahk@xxxxxx>
- Re: How to change freq of mmc2_clk to 48Mhz for OMAP35xx
- From: Elvis Dowson <elvis.dowson@xxxxxxx>
- [PATCH/RFC 3/2] OMAP: PM noop: implement context loss count for non-omap_devices
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/2] OMAP1: amsdelta: reserve memory for videobuf_contig
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC/PATCH v3 6/7] omap3: Export omap3isp platform device structure
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3] OMAP2+: PM/serial: fix console semaphore acquire during suspend
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/5] OMAP4: hwmod data fixes and update
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/8] OMAP3&4: clock data: Fixes and add new clocks nodes
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP1: SRAM: fix size for OMAP1611 SoCs
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 13/11] OMAP2+: GPIO: ensure bank wakeups are enabled by default
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH/RFC 2/2] OMAP: PM: implement context loss count APIs
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH/RFC 1/2] OMAP2+: powerdomain: add API to get context loss count
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 13/11] OMAP2+: GPIO: ensure bank wakeups are enabled by default
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: OMAP HSMMC problems with off-mode
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c
- From: Ben Dooks <ben-i2c@xxxxxxxxx>
- [PATCH 5/5] OMAP4: hwmod & clock data: Fix GPIO opt_clks and ocp_if iclk
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH 4/5] OMAP4: hwmod data: Add IVA and DSP
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH 2/5] OMAP4: hwmod data: Add SYSS_HAS_RESET_STATUS flag
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH 3/5] OMAP4: hwmod data: Fix missing address in DMM and EMIF_FW
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH 1/5] OMAP4: hwmod data: Fix hwmod entries order
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH 0/5] OMAP4: hwmod data fixes and update
- From: Benoit Cousson <b-cousson@xxxxxx>
- Re: [PATCH v8 01/11] OMAP: GPIO: prepare for platform driver
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH] OMAP2+: omap_hwmod: fix wakeup enable/disable for consistency
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] staging: tidspbridge: rmgr/node.c code cleanup
- From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
- Re: [PATCH 1/2] staging: tidspbridge: rmgr/node.c code cleanup
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [PATCH 11/14] OMAP4: PRCM: reorganize existing OMAP4 PRCM header files
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- Re: [PATCH v8 01/11] OMAP: GPIO: prepare for platform driver
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- Re: [PATCH 1/2] staging: tidspbridge: rmgr/node.c code cleanup
- From: Ionut Nicu <ionut.nicu@xxxxxxxxxx>
- Re: [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c
- From: Ben Dooks <ben-i2c@xxxxxxxxx>
- Re: [PATCH v8 01/11] OMAP: GPIO: prepare for platform driver
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c
- From: <aaro.koskinen@xxxxxxxxx>
- Re: [PATCH] OMAP: device: make rt_va easily avaialable to drivers
- From: Hari Kanigeri <hari.kanigeri@xxxxxxxxx>
- [PATCH v2 7/8] OMAP4: clock data: Export control to enable/disable CORE/PER M3 clocks
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 8/8] OMAP4: clock data: Add missing fixed divisors
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 6/8] OMAP4: clock data: Add SCRM auxiliary clock nodes
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 5/8] OMAP4: PRCM: Add SCRM header file
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 3/8] OMAP4: clock data: Add missing DPLL x2 clock nodes
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 4/8] OMAP4: clock data: Add missing fields in iva_hsd_byp_clk_mux_ck
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 2/8] OMAP3: clock data: Add "wkup_clkdm" in sr1_fck and sr2_fck
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 1/8] OMAP4: clock data: Add control for pad_clks_ck and slimbus_clk
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH v2 0/8] OMAP3&4: clock data: Fixes and add new clocks nodes
- From: Benoit Cousson <b-cousson@xxxxxx>
- [PATCH 2/2] staging: tidspbridge: rmgr code cleanup
- From: Ionut Nicu <ionut.nicu@xxxxxxxxx>
- [PATCH 1/2] staging: tidspbridge: rmgr/node.c code cleanup
- From: Ionut Nicu <ionut.nicu@xxxxxxxxx>
- [PATCH 0/2] staging: tidspbridge: various cleanups
- From: Ionut Nicu <ionut.nicu@xxxxxxxxx>
- Re: [PATCH v8 01/11] OMAP: GPIO: prepare for platform driver
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- Re: How to change freq of mmc2_clk to 48Mhz for OMAP35xx
- From: Elvis Dowson <elvis.dowson@xxxxxxx>
- Re: [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c
- From: Ben Dooks <ben-i2c@xxxxxxxxx>
- Re: [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] OMAP2+: disable idle early in the suspend sequence
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- [PATCH v3] OMAP2+: disable idle early in the suspend sequence
- From: jean.pihet@xxxxxxxxxxxxxx
- Re: [PATCH v4] usb: musb: Adding names for IRQs in resource structure
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- [PATCH 13/11] OMAP2+: GPIO: ensure bank wakeups are enabled by default
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v8 01/11] OMAP: GPIO: prepare for platform driver
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c
- From: Ben Dooks <ben-i2c@xxxxxxxxx>
- Re: [PATCH 1/2] ARM: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6
- From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
- Re: [PATCH 2/2] ARM: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL
- From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
- Re: OMAP HSMMC problems with off-mode
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: OMAP HSMMC problems with off-mode
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: Unbalanced IRQ wake disable during resume from static suspend
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] OMAP2+: disable idle early in the suspend sequence
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: OMAP HSMMC problems with off-mode
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] OMAP2+: disable idle early in the suspend sequence
- From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
- Re: [PATCH 00/11] OMAP: PRCM/powerdomain/clockdomain patches for 2.6.38, part two
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH v3] OMAP2+: disable idle early in the suspend sequence
- From: jean.pihet@xxxxxxxxxxxxxx
[Index of Archives]
[Linux USB Devel]
[Linux WPAN Networking]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]