I would gladly welcome any pointers that could help me solve this issue.
you're connecting a FS/LS device to EHCI port, that doesn't work. OMAP
can't handle port handoff to companion OHCI controller, then it fails
not being able to enumerate the device. Try remuxing your port to OHCI
controller and disabling EHCI from Kconfig.
It actually is a HS device (it's a 4-port hub) - when booting the vendor
supplied kernel (based off 2.6.32, i.e. pre -IR redesign), the device
identifies as follows:
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
with the following boot messages:
usb 1-2: new high speed USB device using ehci-omap and address 2
usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
I've pasted the boot log for my kernel:
http://pastie.org/1379102
And the boot log for the original kernel:
http://pastie.org/1379100
Cheers,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
