gpio_direction_output() has a value argument, there's no need to call gpio_set_value() explicitly right after. Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> --- arch/arm/mach-omap2/board-igep0020.c | 20 ++++++++------------ 1 files changed, 8 insertions(+), 12 deletions(-) diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 5e035a5..20b88c1 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -342,24 +342,21 @@ static void __init igep2_leds_init(void) static inline void igep2_leds_init(void) { if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) { + (gpio_direction_output(IGEP2_GPIO_LED0_RED, 0) == 0)) gpio_export(IGEP2_GPIO_LED0_RED, 0); - gpio_set_value(IGEP2_GPIO_LED0_RED, 0); - } else + else pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n"); if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) { + (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 0) == 0)) gpio_export(IGEP2_GPIO_LED0_GREEN, 0); - gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0); - } else + else pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n"); if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) { + (gpio_direction_output(IGEP2_GPIO_LED1_RED, 0) == 0)) gpio_export(IGEP2_GPIO_LED1_RED, 0); - gpio_set_value(IGEP2_GPIO_LED1_RED, 0); - } else + else pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n"); } @@ -397,10 +394,9 @@ static int igep2_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) - && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) { + && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 0) == 0)) gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); - gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0); - } else + else pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n"); #else igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; -- 1.7.2.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html