[PATCH 2/2] omap3: igepv2: LED gpio-led:green:d1 is active low

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Make sure the LED is turned off at boot time, and configure the GPIO LED
device as active low.

Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
 arch/arm/mach-omap2/board-igep0020.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 20b88c1..41a4b25 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -317,6 +317,7 @@ static struct gpio_led igep2_gpio_leds[] = {
 		.name			= "gpio-led:green:d1",
 		.default_trigger	= "heartbeat",
 		.gpio			= -EINVAL, /* gets replaced */
+		.active_low		= 1,
 	},
 };
 
@@ -394,7 +395,7 @@ static int igep2_twl_gpio_setup(struct device *dev,
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
 #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
 	if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)
-	    && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 0) == 0))
+	    && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0))
 		gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
 	else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n");
-- 
1.7.2.2

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux