This patch registers the TWL4030 PMIC specific informtion
with the voltage driver. Failing this patch the voltage driver
is unware of the formula to use for vsel to voltage and vice versa
conversion and lot of other PMIC dependent parameters.
This file is based on the arch/arm/plat-omap opp_twl_tpl.c file
by Paul Walmsley. The original file is replaced by this file.
Signed-off-by: Thara Gopinath <thara@xxxxxx>
---
There was a review comment on v4 of this patch to remove such
a file all-together and move the code to drivers/mfd/twl-core.c.
But the number of voltage parameters to be passed from PMIC side
for each vdd is huge and drivers/mfd/twl-core.c looked ugly
with all these code and #ifdefs for OMAP.
arch/arm/mach-omap2/Makefile | 2 +
arch/arm/mach-omap2/omap_twl.c | 111 ++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/pm.c | 4 ++
arch/arm/mach-omap2/pm.h | 10 ++++
4 files changed, 127 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-omap2/omap_twl.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ee53602..59585d9 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -20,6 +20,8 @@ obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) prm44xx.o $(hwmod-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+
# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
new file mode 100644
index 0000000..b8f0874
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -0,0 +1,111 @@
+/**
+ * OMAP and TWL PMIC specific intializations.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated.
+ * Thara Gopinath
+ * Copyright (C) 2009 Texas Instruments Incorporated.
+ * Nishanth Menon
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include <plat/voltage.h>
+
+#define OMAP3_SRI2C_SLAVE_ADDR 0x12
+#define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00
+#define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01
+#define OMAP3_VP_CONFIG_ERROROFFSET 0x00
+#define OMAP3_VP_VSTEPMIN_VSTEPMIN 0x1
+#define OMAP3_VP_VSTEPMAX_VSTEPMAX 0x04
+#define OMAP3_VP_VLIMITTO_TIMEOUT_US 200
+
+#define OMAP3430_VP1_VLIMITTO_VDDMIN 0x14
+#define OMAP3430_VP1_VLIMITTO_VDDMAX 0x42
+#define OMAP3430_VP2_VLIMITTO_VDDMIN 0x18
+#define OMAP3430_VP2_VLIMITTO_VDDMAX 0x2c
+
+#define OMAP3630_VP1_VLIMITTO_VDDMIN 0x18
+#define OMAP3630_VP1_VLIMITTO_VDDMAX 0x3c
+#define OMAP3630_VP2_VLIMITTO_VDDMIN 0x18
+#define OMAP3630_VP2_VLIMITTO_VDDMAX 0x30
+
+unsigned long twl4030_vsel_to_uv(const u8 vsel)
+{
+ return (((vsel * 125) + 6000)) * 100;
+}
+
+u8 twl4030_uv_to_vsel(unsigned long uv)
+{
+ return DIV_ROUND_UP(uv - 600000, 12500);
+}
+
+static struct omap_volt_pmic_info omap3_mpu_volt_info = {
+ .slew_rate = 4000,
+ .step_size = 12500,
+ .on_volt = 1200000,
+ .onlp_volt = 1000000,
+ .ret_volt = 975000,
+ .off_volt = 600000,
+ .volt_setup_time = 0xfff,
+ .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
+ .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
+ .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
+ .vp_vddmin = OMAP3430_VP1_VLIMITTO_VDDMIN,
+ .vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX,
+ .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
+ .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
+ .pmic_reg = OMAP3_VDD_MPU_SR_CONTROL_REG,
+ .vsel_to_uv = twl4030_vsel_to_uv,
+ .uv_to_vsel = twl4030_uv_to_vsel,
+};
+
+static struct omap_volt_pmic_info omap3_core_volt_info = {
+ .slew_rate = 4000,
+ .step_size = 12500,
+ .on_volt = 1200000,
+ .onlp_volt = 1000000,
+ .ret_volt = 975000,
+ .off_volt = 600000,
+ .volt_setup_time = 0xfff,
+ .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
+ .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
+ .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
+ .vp_vddmin = OMAP3430_VP2_VLIMITTO_VDDMIN,
+ .vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX,
+ .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
+ .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
+ .pmic_reg = OMAP3_VDD_CORE_SR_CONTROL_REG,
+ .vsel_to_uv = twl4030_vsel_to_uv,
+ .uv_to_vsel = twl4030_uv_to_vsel,
+};
+
+int __init omap3_twl_init(void)
+{
+ struct voltagedomain *voltdm;
+
+ if (!cpu_is_omap34xx())
+ return -ENODEV;
+
+ if (cpu_is_omap3630()) {
+ omap3_mpu_volt_info.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
+ omap3_mpu_volt_info.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
+ omap3_core_volt_info.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
+ omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
+ }
+
+ voltdm = omap_voltage_domain_lookup("mpu");
+ omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info);
+
+ voltdm = omap_voltage_domain_lookup("core");
+ omap_voltage_register_pmic(voltdm, &omap3_core_volt_info);
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 7c64533..6c161a3 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -150,7 +150,11 @@ postcore_initcall(omap2_common_pm_init);
static int __init omap2_common_pm_late_init(void)
{
+ /* Init the OMAP TWL parameters */
+ omap3_twl_init();
+ /* Init the voltage layer */
omap_voltage_late_init();
+ /* Smartreflex device init */
omap_devinit_smartreflex();
return 0;
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index b19d46e..0c83b8b 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -111,4 +111,14 @@ static inline int omap_devinit_smartreflex(void)
static inline void omap_enable_smartreflex_on_init(void) {}
#endif
+
+#ifdef CONFIG_TWL4030_CORE
+extern int omap3_twl_init(void);
+#else
+static inline int omap3_twl_init(void)
+{
+ return -EINVAL;
+}
+#endif
+
#endif
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
