This patch series adds support for OMAP4 support in the
smartreflex and voltage layer. The series involves extensions
to voltage layer and smartreflex layer for supporting OMAP4.
This series in based against kernel.org 2.6.37-rc3 and is
dependent on the "OMAP3: Adding Smartreflex and Voltage driver support"
series.
All these patches are also available at
http://dev.omapzoom.org/?p=thara/omap-dvfs.git;a=summary
head: pm-sr
This patch series has been tested on OMAP4430 SDP with omap2plus_defconfig
with the following menuconfig options enabled
System type -> TI OMAP Implementations -> Smartreflex Support
System type -> TI OMAP Implementations ->
Class 3 mode of Smartreflex Implementation
Benoit Cousson (1):
OMAP4: hwmod: Add inital data for smartreflex modules.
Thara Gopinath (4):
OMAP4: Register voltage PMIC parameters with the voltage layer
OMAP4: Adding voltage driver support
OMAP4: PM: Program correct init voltages for scalable VDDs
OMAP4: Smartreflex framework extensions
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/control.h | 12 ++
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 167 +++++++++++++++++++
arch/arm/mach-omap2/omap_twl.c | 166 ++++++++++++++++++
arch/arm/mach-omap2/pm.c | 12 ++
arch/arm/mach-omap2/pm.h | 5 +
arch/arm/mach-omap2/smartreflex.c | 8 +-
arch/arm/mach-omap2/sr_device.c | 17 ++-
arch/arm/mach-omap2/voltage.c | 249 ++++++++++++++++++++++++++++
arch/arm/plat-omap/Kconfig | 2 +-
arch/arm/plat-omap/include/plat/voltage.h | 12 ++
11 files changed, 647 insertions(+), 5 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
