The smartreflex modules belong to an ALWON_FCLK clock domain that does not have any SW control. The gating of that interface clock is triggered by a transition of the WKUP clock domain to idle. Attach both smartreflex instances on OMAP3 to the WKUP clock domain. The missing clock domain field in srX_fck clock nodes was reported by Kevin during the discussion about smartreflex on OMAP3: https://patchwork.kernel.org/patch/199342/ Signed-off-by: Benoit Cousson <b-cousson@xxxxxx> Cc: Paul Walmsley <paul@xxxxxxxxx> Cc: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> --- arch/arm/mach-omap2/clock3xxx_data.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index d85ecd5..741f6a0 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3044,6 +3044,7 @@ static struct clk sr1_fck = { .parent = &sys_ck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_SR1_SHIFT, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -3054,6 +3055,7 @@ static struct clk sr2_fck = { .parent = &sys_ck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_SR2_SHIFT, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
