Hello. On 10-12-2010 15:38, Hema HK wrote:
Added the TWL6030-usb transceiver option in the Kconfig
Signed-off-by: Hema HK<hemahk@xxxxxx> Cc: Felipe Balbi<balbi@xxxxxx> Cc: David Brownell<dbrownell@xxxxxxxxxxxxxxxxxxxxx>
[...]
Index: usb/drivers/usb/otg/Kconfig =================================================================== --- usb.orig/drivers/usb/otg/Kconfig +++ usb/drivers/usb/otg/Kconfig @@ -59,6 +59,18 @@ config TWL4030_USB This transceiver supports high and full speed devices plus, in host mode, low speed. +config TWL6030_USB + tristate "TWL6030 USB Transceiver Driver" + depends on TWL4030_CORE + select USB_OTG_UTILS + help + Enable this to support the USB OTG transceiver on TWL6030 + family chips. This TWL6030 transceiver has the VBUS and ID GND + and OTG SRP events capabilities. For all other transceiver functionality + UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs + are hooked to this driver through platform_data structure. + The definition of internal PHY APIs are in the mach-omap2 layer. +
Why not do it in the patch 2, together with the driver itself? And where are you adding the driver to drivers/usb/otg/Makefile?
WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
