Hi Paul, Here is a small set of OMAP4 hwmod data updates. Re-order properly the data that were a little bit shuffled during the previous merge window. Add the new reset flags introduced in 2.6.37 and that were not used in the hwmod data. The OMAP2 and OMAP3 fixes should come soon. Fix some missing field in the GPIO OMAP4 hwmod data that I missed during the review. IVA and DSP are added just to allow the processors device creation at boot time and avoid the warnings. Thanks to Charu for testing the GPIO / WD_TIMER changes. Thanks to Govindraj for testing the UART changes. The series is based on lo/for-next (v2.6.37-rc5-66-ga2814df) and is available here: git://gitorious.org/omap-pm/linux.git for_2.6.38/hwmod_data Please note that there is a slight dependency with the following patch due to the name change of the iva fclk: OMAP4: clock data: Add missing DPLL x2 clock node https://patchwork.kernel.org/patch/396612/ Tested on sdp4430 + ES2.0/ES2.1. Regards, Benoit Benoit Cousson (5): OMAP4: hwmod data: Fix hwmod entries order OMAP4: hwmod data: Add SYSS_HAS_RESET_STATUS flag OMAP4: hwmod data: Fix missing address in DMM and EMIF_FW OMAP4: hwmod data: Add IVA and DSP OMAP4: hwmod & clock data: Fix GPIO opt_clks and ocp_if iclk arch/arm/mach-omap2/clock44xx_data.c | 12 +- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 1256 ++++++++++++++++++---------- 2 files changed, 822 insertions(+), 446 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
