Hi Benoît On Wed, 15 Dec 2010, Benoit Cousson wrote: > Here is a small set of OMAP4 hwmod data updates. > > Re-order properly the data that were a little bit shuffled during > the previous merge window. > Add the new reset flags introduced in 2.6.37 and that were not > used in the hwmod data. The OMAP2 and OMAP3 fixes should come soon... > ...maybe not that soon :-) > Fix some missing field in the GPIO OMAP4 hwmod data that I missed > during the review. > IVA and DSP are added just to allow the processors device creation > at boot time and avoid the warnings. > > Thanks to Charu for testing the GPIO / WD_TIMER changes. > Thanks to Govindraj for testing the UART changes. > > The series is based on your clk_a_2.6.38 branch from your integration tree > (git://git.pwsan.com/linux-integration) and is available here: > git://gitorious.org/omap-pm/linux.git for_2.6.38/hwmod_data > > Please note that there is a slight dependency with the following patch > due to the name change of the iva fclk: > OMAP4: clock data: Add missing DPLL x2 clock node > https://patchwork.kernel.org/patch/396612/ > > Tested on sdp4430 + ES2.0/ES2.1. > > Regards, > Benoit > > > Changes since v1: > http://www.spinics.net/lists/arm-kernel/msg107082.html: > - Include the changelog fixes from Paul > - Fix the order of the dsp hwmod data > - Fix OMAP2430 i2c dev_attr warning (minor fix, but not tested) > - Include Kevin's patch to fix wakeup in hwmod core > > > Benoit Cousson (6): > OMAP4: hwmod data: Fix hwmod entries order > OMAP4: hwmod data: Add SYSS_HAS_RESET_STATUS flag > OMAP4: hwmod data: Fix missing address in DMM and EMIF_FW > OMAP4: hwmod data: Add IVA and DSP > OMAP4: hwmod & clock data: Fix GPIO opt_clks and ocp_if iclk > OMAP2430: hwmod data: Use common dev_attr for i2c1 and i2c2 > > Kevin Hilman (1): > OMAP2+: omap_hwmod: fix wakeup enable/disable for consistency Thanks, I've updated the hwmod_b_2.6.38 branch with these changes. The 'integration-2.6.38-20101221-002' tag on git://git.pwsan.com/linux-integration contains the updated patches, as well as previous dependencies, based on Tony's current omap-for-linus branch. - Paul
