Linux MMC Development

• Date Index

• [PATCHv1 0/2] mmc: sdhci-msm: Addresses minor cleanups, Ritesh Harjani
  • [PATCHv1 2/2] mmc: sdhci-msm: Remove unnecessary comments of CDC init sequence, Ritesh Harjani
    • Re: [PATCHv1 2/2] mmc: sdhci-msm: Remove unnecessary comments of CDC init sequence, Adrian Hunter
    • Re: [PATCHv1 2/2] mmc: sdhci-msm: Remove unnecessary comments of CDC init sequence, Ulf Hansson
  • [PATCHv1 1/2] mmc: sdhci-msm: Remove platform_execute_tuning from sdhci_msm_ops, Ritesh Harjani
    • Re: [PATCHv1 1/2] mmc: sdhci-msm: Remove platform_execute_tuning from sdhci_msm_ops, Adrian Hunter
    • Re: [PATCHv1 1/2] mmc: sdhci-msm: Remove platform_execute_tuning from sdhci_msm_ops, Ulf Hansson
• [PATCH v4 0/2] mmc: pwrseq: add support for Marvell SD8787 chip, Matt Ranostay
  • [PATCH v4 1/2] devicetree: document new marvell-8xxx and pwrseq-sd8787 options, Matt Ranostay
    • Re: [PATCH v4 1/2] devicetree: document new marvell-8xxx and pwrseq-sd8787 options, Rob Herring
  • [PATCH v4 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Matt Ranostay
  • Re: [PATCH v4 0/2] mmc: pwrseq: add support for Marvell SD8787 chip, Ulf Hansson
• [PATCH v2 0/2] Auto BKOPS PM suspend, Uri Yanai
  • [PATCH v2 2/2] mmc: Checking BKOPS status prior to Suspend, Uri Yanai
    • Re: [PATCH v2 2/2] mmc: Checking BKOPS status prior to Suspend, Ulf Hansson
      • Re: [PATCH v2 2/2] mmc: Checking BKOPS status prior to Suspend, Ritesh Harjani
        • Re: [PATCH v2 2/2] mmc: Checking BKOPS status prior to Suspend, Ulf Hansson
          • Re: [PATCH v2 2/2] mmc: Checking BKOPS status prior to Suspend, Ritesh Harjani
            • Re: [PATCH v2 2/2] mmc: Checking BKOPS status prior to Suspend, Ulf Hansson
      • Re: [PATCH v2 2/2] mmc: Checking BKOPS status prior to Suspend, Shawn Lin
        • Re: [PATCH v2 2/2] mmc: Checking BKOPS status prior to Suspend, Alex Lemberg
          • Re: [PATCH v2 2/2] mmc: Checking BKOPS status prior to Suspend, Shawn Lin
            • Re: [PATCH v2 2/2] mmc: Checking BKOPS status prior to Suspend, Alex Lemberg
              • Re: [PATCH v2 2/2] mmc: Checking BKOPS status prior to Suspend, Shawn Lin
                • Re: [PATCH v2 2/2] mmc: Checking BKOPS status prior to Suspend, Ulf Hansson
                  • Re: [PATCH v2 2/2] mmc: Checking BKOPS status prior to Suspend, Shawn Lin
                    • Re: [PATCH v2 2/2] mmc: Checking BKOPS status prior to Suspend, Alex Lemberg
  • [PATCH v2 1/2] mmc: Adding AUTO_BKOPS_EN bit set for Auto BKOPS support, Uri Yanai
    • Re: [PATCH v2 1/2] mmc: Adding AUTO_BKOPS_EN bit set for Auto BKOPS support, Ulf Hansson
  • Re: [PATCH v2 0/2] Auto BKOPS PM suspend, Ulf Hansson
• [MMC_SPI] mmcblk0: error transferring error -84, amit mahadik
• [PATCH] mmc: core: Pass node pointer to mmc_of_parse, Jan Glauber
  • Re: [PATCH] mmc: core: Pass node pointer to mmc_of_parse, Ulf Hansson
    • Re: [PATCH] mmc: core: Pass node pointer to mmc_of_parse, Jan Glauber
• [PATCH v4 0/3] mmc: mediatek: Use data tune for CMD line tune, Yong Mao
  • [PATCH v4 2/3] ARM64: dts: mediatek: configure some fixed mmc parameters, Yong Mao
  • [PATCH v4 1/3] mmc: dt-bindings: update Mediatek MMC bindings, Yong Mao
    • Re: [PATCH v4 1/3] mmc: dt-bindings: update Mediatek MMC bindings, Ulf Hansson
      • Re: [PATCH v4 1/3] mmc: dt-bindings: update Mediatek MMC bindings, Yong Mao
        • Re: [PATCH v4 1/3] mmc: dt-bindings: update Mediatek MMC bindings, Rob Herring
          • Re: [PATCH v4 1/3] mmc: dt-bindings: update Mediatek MMC bindings, Yong Mao
            • Re: [PATCH v4 1/3] mmc: dt-bindings: update Mediatek MMC bindings, Yong Mao
              • Re: [PATCH v4 1/3] mmc: dt-bindings: update Mediatek MMC bindings, Ulf Hansson
  • [PATCH v4 3/3] mmc: mediatek: Use data tune for CMD line tune, Yong Mao
• [PATCH v3 0/2] mmc: pwrseq: add support for Marvell SD8787 chip, Matt Ranostay
  • [PATCH v3 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Matt Ranostay
  • [PATCH v3 1/2] devicetree: document new marvell-8xxx and pwrseq-sd8787 options, Matt Ranostay
    • Re: [PATCH v3 1/2] devicetree: document new marvell-8xxx and pwrseq-sd8787 options, Rob Herring
      • Re: [PATCH v3 1/2] devicetree: document new marvell-8xxx and pwrseq-sd8787 options, Matt Ranostay
• [PATCH v5 0/3] mmc: sh_mobile_sdhi: fix missing r7s72100 clocks, Chris Brandt
  • [PATCH v5 1/3] mmc: sh_mobile_sdhi: add support for 2 clocks, Chris Brandt
    • Re: [PATCH v5 1/3] mmc: sh_mobile_sdhi: add support for 2 clocks, Wolfram Sang
    • Re: [PATCH v5 1/3] mmc: sh_mobile_sdhi: add support for 2 clocks, Geert Uytterhoeven
      • RE: [PATCH v5 1/3] mmc: sh_mobile_sdhi: add support for 2 clocks, Chris Brandt
  • [PATCH v5 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Chris Brandt
    • Re: [PATCH v5 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Wolfram Sang
    • Re: [PATCH v5 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Geert Uytterhoeven
    • Re: [PATCH v5 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Rob Herring
      • RE: [PATCH v5 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Chris Brandt
        • Re: [PATCH v5 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Rob Herring
          • RE: [PATCH v5 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Chris Brandt
          • Re: [PATCH v5 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Ulf Hansson
  • [PATCH v5 3/3] ARM: dts: r7s72100: update sdhi clock bindings, Chris Brandt
• [PATCH] mmc: s3cmci: include linux/interrupt.h for tasklet_struct, Arnd Bergmann
  • Re: [PATCH] mmc: s3cmci: include linux/interrupt.h for tasklet_struct, Ulf Hansson
• [PATCH v4 0/3] mmc: sh_mobile_sdhi: fix missing r7s72100 clocks, Chris Brandt
  • [PATCH v4 1/3] mmc: sh_mobile_sdhi: add support for 2 clocks, Chris Brandt
  • [PATCH v4 3/3] ARM: dts: r7s72100: update sdhi clock bindings, Chris Brandt
  • [PATCH v4 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Chris Brandt
    • Re: [PATCH v4 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Wolfram Sang
      • RE: [PATCH v4 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Chris Brandt
        • Re: [PATCH v4 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Wolfram Sang
• [PATCH 0/3] mmc: sdhci-s3c: remove s3c specific header file, Jaehoon Chung
  • Message not available
    • [PATCH 2/3] mmc: sdhci-s3c: remove the unnecessary defined values, Jaehoon Chung
      • Re: [PATCH 2/3] mmc: sdhci-s3c: remove the unnecessary defined values, Ulf Hansson
        • Re: [PATCH 2/3] mmc: sdhci-s3c: remove the unnecessary defined values, Jaehoon Chung
          • Re: [PATCH 2/3] mmc: sdhci-s3c: remove the unnecessary defined values, Ulf Hansson
            • Re: [PATCH 2/3] mmc: sdhci-s3c: remove the unnecessary defined values, Jaehoon Chung
  • Message not available
    • [PATCH 1/3] mmc: sdhci-s3c: remove the sdhci-s3c-regs header file, Jaehoon Chung
  • Message not available
    • [PATCH 3/3] mmc: sdhci-s3c: use the bitops API for bit operation, Jaehoon Chung
• [PATCH v2] mmc: sdio: check the buffer address for sdio API, Shawn Lin
  • Re: [PATCH v2] mmc: sdio: check the buffer address for sdio API, kbuild test robot
    • Re: [PATCH v2] mmc: sdio: check the buffer address for sdio API, Shawn Lin
• [PATCH 0/3] mmc: host: tmio: sdio irq improvements, Wolfram Sang
  • [PATCH v2 2/3] mmc: host: tmio: SDIO_STATUS_QUIRK is rather SDIO_STATUS_SETBITS, Wolfram Sang
  • [PATCH v2 3/3] mmc: tmio: discard obsolete SDIO irqs before enabling irqs, Wolfram Sang
  • [PATCH v2 1/3] mmc: host: tmio: refactor calls to sdio irq, Wolfram Sang
  • Re: [PATCH 0/3] mmc: host: tmio: sdio irq improvements, Ulf Hansson
• [PATCH v3 0/3] mmc: mediatek: Use data tune for CMD line tune, Yong Mao
  • [PATCH v3 1/3] mmc: dt-bindings: update Mediatek MMC bindings, Yong Mao
    • Re: [PATCH v3 1/3] mmc: dt-bindings: update Mediatek MMC bindings, Daniel Kurtz
    • Re: [PATCH v3 1/3] mmc: dt-bindings: update Mediatek MMC bindings, Ulf Hansson
  • [PATCH v3 2/3] dts: mediatek: configure some fixed mmc parameters, Yong Mao
    • Re: [PATCH v3 2/3] dts: mediatek: configure some fixed mmc parameters, Ulf Hansson
      • Re: [PATCH v3 2/3] dts: mediatek: configure some fixed mmc parameters, Matthias Brugger
  • [PATCH v3 3/3] mmc: mediatek: Use data tune for CMD line tune, Yong Mao
    • Re: [PATCH v3 3/3] mmc: mediatek: Use data tune for CMD line tune, kbuild test robot
    • [PATCH] mmc: mediatek: fix semicolon.cocci warnings, kbuild test robot
    • Re: [PATCH v3 3/3] mmc: mediatek: Use data tune for CMD line tune, Ulf Hansson
• [PATCH v3 0/3] mmc: sh_mobile_sdhi: fix missing r7s72100 clocks, Chris Brandt
  • [PATCH v3 3/3] ARM: dts: r7s72100: update sdhi clock bindings, Chris Brandt
  • [PATCH v3 1/3] mmc: sh_mobile_sdhi: add support for 2 clocks, Chris Brandt
    • Re: [PATCH v3 1/3] mmc: sh_mobile_sdhi: add support for 2 clocks, Wolfram Sang
    • Re: [PATCH v3 1/3] mmc: sh_mobile_sdhi: add support for 2 clocks, Ulf Hansson
      • RE: [PATCH v3 1/3] mmc: sh_mobile_sdhi: add support for 2 clocks, Chris Brandt
        • Re: [PATCH v3 1/3] mmc: sh_mobile_sdhi: add support for 2 clocks, Wolfram Sang
  • [PATCH v3 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Chris Brandt
    • Re: [PATCH v3 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Wolfram Sang
    • Re: [PATCH v3 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Ulf Hansson
      • RE: [PATCH v3 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Chris Brandt
        • Re: [PATCH v3 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Ulf Hansson
          • RE: [PATCH v3 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Chris Brandt
• [PATCH V4] mmc: sdhci-acpi: support deferred probe, Zhang Rui
  • Re: [PATCH V4] mmc: sdhci-acpi: support deferred probe, Ulf Hansson
• [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver, Paul Cercueil
  • [PATCH 12/13] pwm: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
    • Re: [PATCH 12/13] pwm: jz4740: Let the pinctrl driver configure the pins, Thierry Reding
  • [PATCH 10/13] mtd: nand: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
    • Re: [PATCH 10/13] mtd: nand: jz4740: Let the pinctrl driver configure the pins, Boris Brezillon
  • [PATCH 07/13] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers, Paul Cercueil
  • [PATCH 03/13] pinctrl-jz4780: add a pinctrl driver for the Ingenic jz4780 SoC, Paul Cercueil
  • [PATCH 06/13] MIPS: jz4780: DTS: Add node for the jz4780-pinctrl driver, Paul Cercueil
  • [PATCH 05/13] MIPS: jz4740: DTS: Add node for the jz4740-pinctrl driver, Paul Cercueil
    • Re: [PATCH 05/13] MIPS: jz4740: DTS: Add node for the jz4740-pinctrl driver, Linus Walleij
  • [PATCH 13/13] MIPS: jz4740: Remove custom GPIO code, Paul Cercueil
    • Re: [PATCH 13/13] MIPS: jz4740: Remove custom GPIO code, Thierry Reding
      • Re: [PATCH 13/13] MIPS: jz4740: Remove custom GPIO code, Paul Cercueil
    • Re: [PATCH 13/13] MIPS: jz4740: Remove custom GPIO code, Linus Walleij
      • Re: [PATCH 13/13] MIPS: jz4740: Remove custom GPIO code, Paul Cercueil
  • [PATCH 09/13] mmc: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
    • Re: [PATCH 09/13] mmc: jz4740: Let the pinctrl driver configure the pins, Ulf Hansson
      • Re: [PATCH 09/13] mmc: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
  • [PATCH 04/13] MIPS: ingenic: Enable pinctrl for all ingenic SoCs, Paul Cercueil
  • [PATCH 08/13] MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers, Paul Cercueil
  • [PATCH 11/13] fbdev: jz4740-fb: Let the pinctrl driver configure the pins, Paul Cercueil
  • [PATCH 01/13] Documentation: dt/bindings: Document pinctrl-ingenic, Paul Cercueil
    • Re: [PATCH 01/13] Documentation: dt/bindings: Document pinctrl-ingenic, Linus Walleij
  • [PATCH 02/13] pinctrl-jz4740: add a pinctrl driver for the Ingenic jz4740 SoC, Paul Cercueil
    • Re: [PATCH 02/13] pinctrl-jz4740: add a pinctrl driver for the Ingenic jz4740 SoC, Linus Walleij
  • Re: [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver, Thierry Reding
    • Re: [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver, Paul Cercueil
      • Re: [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver, Linus Walleij
        • Re: [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver, Paul Cercueil
      • [PATCH v2 00/14] Ingenic JZ4740 / JZ4780 pinctrl driver, Paul Cercueil
        • [PATCH v2 02/14] Documentation: dt/bindings: Document pinctrl-gpio, Paul Cercueil
        • [PATCH v2 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs, Paul Cercueil
        • [PATCH v2 09/14] MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers, Paul Cercueil
        • [PATCH v2 07/14] MIPS: jz4780: DTS: Add nodes for ingenic pinctrl and gpio drivers, Paul Cercueil
        • [PATCH v2 14/14] MIPS: jz4740: Remove custom GPIO code, Paul Cercueil
        • [PATCH v2 13/14] pwm: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
        • [PATCH v2 11/14] mtd: nand: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
        • [PATCH v2 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers, Paul Cercueil
        • [PATCH v2 12/14] fbdev: jz4740-fb: Let the pinctrl driver configure the pins, Paul Cercueil
        • [PATCH v2 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs, Paul Cercueil
        • [PATCH v2 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers, Paul Cercueil
        • [PATCH v2 10/14] mmc: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
          • Re: [PATCH v2 10/14] mmc: jz4740: Let the pinctrl driver configure the pins, Ulf Hansson
        • [PATCH v2 04/14] GPIO: Add gpio-ingenic driver, Paul Cercueil
          • Re: [PATCH v2 04/14] GPIO: Add gpio-ingenic driver, kbuild test robot
          • [PATCH] GPIO: fix semicolon.cocci warnings, kbuild test robot
          • Re: [PATCH v2 04/14] GPIO: Add gpio-ingenic driver, kbuild test robot
        • [PATCH v2 01/14] Documentation: dt/bindings: Document pinctrl-ingenic, Paul Cercueil
          • Re: [PATCH v2 01/14] Documentation: dt/bindings: Document pinctrl-ingenic, Linus Walleij
            • Re: [PATCH v2 01/14] Documentation: dt/bindings: Document pinctrl-ingenic, Paul Cercueil
              • Re: [PATCH v2 01/14] Documentation: dt/bindings: Document pinctrl-ingenic, Linus Walleij
      • [PATCH v3 00/14] Ingenic JZ4740 / JZ4780 pinctrl driver, Paul Cercueil
        • [PATCH v3 14/14] MIPS: jz4740: Remove custom GPIO code, Paul Cercueil
        • [PATCH v3 07/14] MIPS: jz4780: DTS: Add nodes for ingenic pinctrl and gpio drivers, Paul Cercueil
        • [PATCH v3 13/14] pwm: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
        • [PATCH v3 12/14] fbdev: jz4740-fb: Let the pinctrl driver configure the pins, Paul Cercueil
          • Re: [PATCH v3 12/14] fbdev: jz4740-fb: Let the pinctrl driver configure the pins, Bartlomiej Zolnierkiewicz
        • [PATCH v3 11/14] mtd: nand: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
        • [PATCH v3 10/14] mmc: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
          • Re: [PATCH v3 10/14] mmc: jz4740: Let the pinctrl driver configure the pins, kbuild test robot
            • Re: [PATCH v3 10/14] mmc: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
        • [PATCH v3 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers, Paul Cercueil
          • Re: [PATCH v3 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers, Linus Walleij
        • [PATCH v3 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers, Paul Cercueil
        • [PATCH v3 09/14] MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers, Paul Cercueil
        • [PATCH v3 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs, Paul Cercueil
        • [PATCH v3 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs, Paul Cercueil
          • Re: [PATCH v3 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs, Linus Walleij
            • Re: [PATCH v3 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs, Paul Cercueil
        • [PATCH v3 04/14] GPIO: Add gpio-ingenic driver, Paul Cercueil
          • Re: [PATCH v3 04/14] GPIO: Add gpio-ingenic driver, Linus Walleij
            • Re: [PATCH v3 04/14] GPIO: Add gpio-ingenic driver, Paul Cercueil
              • Re: [PATCH v3 04/14] GPIO: Add gpio-ingenic driver, Linus Walleij
          • Re: [PATCH v3 04/14] GPIO: Add gpio-ingenic driver, Linus Walleij
            • Re: [PATCH v3 04/14] GPIO: Add gpio-ingenic driver, Paul Cercueil
              • Re: [PATCH v3 04/14] GPIO: Add gpio-ingenic driver, Linus Walleij
        • [PATCH v3 01/14] Documentation: dt/bindings: Document pinctrl-ingenic, Paul Cercueil
          • Re: [PATCH v3 01/14] Documentation: dt/bindings: Document pinctrl-ingenic, Rob Herring
            • Re: [PATCH v3 01/14] Documentation: dt/bindings: Document pinctrl-ingenic, Paul Cercueil
              • Re: [PATCH v3 01/14] Documentation: dt/bindings: Document pinctrl-ingenic, Linus Walleij
                • Re: [PATCH v3 01/14] Documentation: dt/bindings: Document pinctrl-ingenic, Paul Cercueil
                  • Re: [PATCH v3 01/14] Documentation: dt/bindings: Document pinctrl-ingenic, Linus Walleij
                    • Re: [PATCH v3 01/14] Documentation: dt/bindings: Document pinctrl-ingenic, Paul Cercueil
                      • Re: [PATCH v3 01/14] Documentation: dt/bindings: Document pinctrl-ingenic, Linus Walleij
          • [PATCH v4 00/14] Ingenic JZ4740 / JZ4780 pinctrl driver, Paul Cercueil
            • [PATCH v4 11/14] mtd: nand: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
            • [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers, Paul Cercueil
              • Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers, Sergei Shtylyov
                • Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers, Paul Cercueil
                  • Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers, Sergei Shtylyov
              • Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers, Linus Walleij
                • Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers, Paul Cercueil
                  • Re: [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers, Linus Walleij
            • [PATCH v4 12/14] fbdev: jz4740-fb: Let the pinctrl driver configure the pins, Paul Cercueil
            • [PATCH v4 04/14] GPIO: Add gpio-ingenic driver, Paul Cercueil
              • Re: [PATCH v4 04/14] GPIO: Add gpio-ingenic driver, kbuild test robot
              • Re: [PATCH v4 04/14] GPIO: Add gpio-ingenic driver, Linus Walleij
            • [PATCH v4 13/14] pwm: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
              • Re: [PATCH v4 13/14] pwm: jz4740: Let the pinctrl driver configure the pins, Thierry Reding
            • [PATCH v4 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs, Paul Cercueil
              • Re: [PATCH v4 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs, Linus Walleij
                • Re: [PATCH v4 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs, Lee Jones
            • [PATCH v4 09/14] MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers, Paul Cercueil
            • [PATCH v4 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers, Paul Cercueil
            • [PATCH v4 07/14] MIPS: jz4780: DTS: Add nodes for ingenic pinctrl and gpio drivers, Paul Cercueil
            • [PATCH v4 14/14] MIPS: jz4740: Remove custom GPIO code, Paul Cercueil
            • [PATCH v4 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs, Paul Cercueil
            • [PATCH v4 02/14] dt/bindings: Document gpio-ingenic, Paul Cercueil
              • Re: [PATCH v4 02/14] dt/bindings: Document gpio-ingenic, Rob Herring
            • [PATCH v4 10/14] mmc: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
            • [PATCH v4 01/14] dt/bindings: Document pinctrl-ingenic, Paul Cercueil
              • Re: [PATCH v4 01/14] dt/bindings: Document pinctrl-ingenic, Rob Herring
              • [PATCH v4 00/14] Ingenic JZ4740 / JZ4780 pinctrl driver, Paul Cercueil
                • [PATCH v5 01/14] dt/bindings: Document pinctrl-ingenic, Paul Cercueil
                • [PATCH v5 02/14] dt/bindings: Document gpio-ingenic, Paul Cercueil
                  • Re: [PATCH v5 02/14] dt/bindings: Document gpio-ingenic, Rob Herring
                • [PATCH v5 03/14] pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs, Paul Cercueil
                  • Re: [PATCH v5 03/14] pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs, Paul Cercueil
                    • Re: [PATCH v5 03/14] pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs, Linus Walleij
                • [PATCH v5 07/14] MIPS: jz4780: DTS: Add nodes for ingenic pinctrl and gpio drivers, Paul Cercueil
                • [PATCH v5 09/14] MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers, Paul Cercueil
                • [PATCH v5 04/14] GPIO: Add gpio-ingenic driver, Paul Cercueil
                  • Re: [PATCH v5 04/14] GPIO: Add gpio-ingenic driver, Paul Cercueil
                    • Re: [PATCH v5 04/14] GPIO: Add gpio-ingenic driver, Linus Walleij
                • [PATCH v5 11/14] mtd: nand: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
                • [PATCH v5 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs, Paul Cercueil
                  • Re: [PATCH v5 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs, Linus Walleij
                    • Re: [PATCH v5 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs, Paul Cercueil
                  • Re: [PATCH v5 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs, Linus Walleij
                    • Re: [PATCH v5 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs, Paul Cercueil
                      • Re: [PATCH v5 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs, Linus Walleij
                        • Re: [PATCH v5 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs, Ralf Baechle
                          • Re: [PATCH v5 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs, Linus Walleij
                • [PATCH v5 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers, Paul Cercueil
                • [PATCH v5 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers, Paul Cercueil
                • [PATCH v5 14/14] MIPS: jz4740: Remove custom GPIO code, Paul Cercueil
                • [PATCH v5 13/14] pwm: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
                • [PATCH v5 12/14] fbdev: jz4740-fb: Let the pinctrl driver configure the pins, Paul Cercueil
                • [PATCH v5 10/14] mmc: jz4740: Let the pinctrl driver configure the pins, Paul Cercueil
        • [PATCH v3 02/14] Documentation: dt/bindings: Document pinctrl-gpio, Paul Cercueil
          • Re: [PATCH v3 02/14] Documentation: dt/bindings: Document pinctrl-gpio, Rob Herring
  • Re: [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver, Linus Walleij
• [PATCH] mmc: host: tmio: disable clocks when unbinding, Wolfram Sang
  • Re: [PATCH] mmc: host: tmio: disable clocks when unbinding, Geert Uytterhoeven
  • RE: [PATCH] mmc: host: tmio: disable clocks when unbinding, Chris Brandt
  • Re: [PATCH] mmc: host: tmio: disable clocks when unbinding, Ulf Hansson
• [PATCH v2 0/3] mmc: sh_mobile_sdhi: fix missing r7s72100 clocks, Chris Brandt
  • [PATCH v2 3/3] ARM: dts: r7s72100: update sdhi clock bindings, Chris Brandt
    • Re: [PATCH v2 3/3] ARM: dts: r7s72100: update sdhi clock bindings, Geert Uytterhoeven
  • [PATCH v2 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Chris Brandt
    • Re: [PATCH v2 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Wolfram Sang
      • RE: [PATCH v2 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Chris Brandt
    • Re: [PATCH v2 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Geert Uytterhoeven
      • RE: [PATCH v2 2/3] mmc: sh_mobile_sdhi: explain clock bindings, Chris Brandt
  • [PATCH v2 1/3] mmc: sh_mobile_sdhi: add support for 2 clocks, Chris Brandt
    • Re: [PATCH v2 1/3] mmc: sh_mobile_sdhi: add support for 2 clocks, Wolfram Sang
      • RE: [PATCH v2 1/3] mmc: sh_mobile_sdhi: add support for 2 clocks, Chris Brandt
• [GIT PULL] MMC fixes for v.4.10 rc5, Ulf Hansson
• [PATCH v2 0/3] mmc: mediatek: Use data tune for CMD line tune, Yong Mao
  • [PATCH v2 3/3] mmc: mediatek: Use data tune for CMD line tune, Yong Mao
  • [PATCH v2 1/3] mmc: dt-bindings: update Mediatek MMC bindings, Yong Mao
  • [PATCH v2 2/3] dts: mediatek: configure some fixed mmc parameters, Yong Mao
• [PATCH 0/3] Auto BKOPS PM suspend, Uri Yanai
  • [PATCH 1/3] mmc: replacing hardcoded value for runtime PM suspend, Uri Yanai
  • [PATCH 2/3] mmc: Adding AUTO_BKOPS_EN bit set for Auto BKOPS support, Uri Yanai
  • [PATCH 3/3] mmc: Checking BKOPS status prior to Suspend, Uri Yanai
    • Re: [PATCH 3/3] mmc: Checking BKOPS status prior to Suspend, Shawn Lin
      • RE: [PATCH 3/3] mmc: Checking BKOPS status prior to Suspend, Uri Yanai
    • Re: [PATCH 3/3] mmc: Checking BKOPS status prior to Suspend, Adrian Hunter
      • RE: [PATCH 3/3] mmc: Checking BKOPS status prior to Suspend, Uri Yanai
        • Re: [PATCH 3/3] mmc: Checking BKOPS status prior to Suspend, Alex Lemberg
          • Re: [PATCH 3/3] mmc: Checking BKOPS status prior to Suspend, Adrian Hunter
            • Re: [PATCH 3/3] mmc: Checking BKOPS status prior to Suspend, Alex Lemberg
              • Re: [PATCH 3/3] mmc: Checking BKOPS status prior to Suspend, Adrian Hunter
                • Re: [PATCH 3/3] mmc: Checking BKOPS status prior to Suspend, Alex Lemberg
                  • Re: [PATCH 3/3] mmc: Checking BKOPS status prior to Suspend, Adrian Hunter
                    • Re: [PATCH 3/3] mmc: Checking BKOPS status prior to Suspend, Alex Lemberg
  • Re: [PATCH 0/3] Auto BKOPS PM suspend, Shawn Lin
    • RE: [PATCH 0/3] Auto BKOPS PM suspend, Uri Yanai
• [PATCH] mmc: sdio: don't allow vmalloc area buffer to use sdio API, Shawn Lin
  • Re: [PATCH] mmc: sdio: don't allow vmalloc area buffer to use sdio API, Ulf Hansson
    • Re: [PATCH] mmc: sdio: don't allow vmalloc area buffer to use sdio API, Shawn Lin
• [PATCH v6 1/2] mmc: dw_mmc: silent verbose log when calling from PM context, Shawn Lin
  • [PATCH v6 2/2] mmc: dw_mmc: force setup bus if active slots exist, Shawn Lin
    • Re: [PATCH v6 2/2] mmc: dw_mmc: force setup bus if active slots exist, Jaehoon Chung
  • Re: [PATCH v6 1/2] mmc: dw_mmc: silent verbose log when calling from PM context, Jaehoon Chung
• [PATCH V2 0/4] Enable onboard SDHCI for Nexus 5X (msm8992), Jeremy McNicoll
  • [PATCH V2 1/4] clk: gcc: Updates for SDHCI enablement, Jeremy McNicoll
    • Re: [PATCH V2 1/4] clk: gcc: Updates for SDHCI enablement, Stephen Boyd
      • Re: [PATCH V2 1/4] clk: gcc: Updates for SDHCI enablement, Jeremy McNicoll
  • [PATCH V2 2/4] sdhci: Add quirk for delayed IRQ ACK, Jeremy McNicoll
  • [PATCH V2 3/4] arm64: dts: Enable SDHCI for Nexus 5X (msm8992), Jeremy McNicoll
    • Re: [PATCH V2 3/4] arm64: dts: Enable SDHCI for Nexus 5X (msm8992), Bjorn Andersson
      • Re: [PATCH V2 3/4] arm64: dts: Enable SDHCI for Nexus 5X (msm8992), Jeremy McNicoll
    • Re: [PATCH V2 3/4] arm64: dts: Enable SDHCI for Nexus 5X (msm8992), Rob Herring
  • [PATCH V2 4/4] dts: doc: rename rpm_requests to respect DT naming conventions, Jeremy McNicoll
    • Re: [PATCH V2 4/4] dts: doc: rename rpm_requests to respect DT naming conventions, Rob Herring
    • Re: [PATCH V2 4/4] dts: doc: rename rpm_requests to respect DT naming conventions, Jeremy McNicoll
• [PATCH v3 0/13] arm64: allwinner: a64: Enable MMC support, Maxime Ripard
  • [PATCH v3 2/13] mmc: sunxi: Gate the clock when rate is 0, Maxime Ripard
    • Re: [PATCH v3 2/13] mmc: sunxi: Gate the clock when rate is 0, Ulf Hansson
  • [PATCH v3 7/13] mmc: sunxi: Add more debug messages, Maxime Ripard
    • Re: [PATCH v3 7/13] mmc: sunxi: Add more debug messages, Ulf Hansson
      • Re: [PATCH v3 7/13] mmc: sunxi: Add more debug messages, Maxime Ripard
  • [PATCH v3 11/13] arm64: allwinner: pine64: add MMC support, Maxime Ripard
  • [PATCH v3 13/13] arm64: allwinner: add BananaPi-M64 support, Maxime Ripard
  • [PATCH v3 12/13] arm64: allwinner: a64: add UART1 pin nodes, Maxime Ripard
  • [PATCH v3 5/13] mmc: sunxi: Mask DATA0 when updating the clock, Maxime Ripard
    • Re: [PATCH v3 5/13] mmc: sunxi: Mask DATA0 when updating the clock, Ulf Hansson
      • Re: [PATCH v3 5/13] mmc: sunxi: Mask DATA0 when updating the clock, Maxime Ripard
  • [PATCH v3 8/13] arm64: allwinner: a64: Add MMC nodes, Maxime Ripard
    • Re: [PATCH v3 8/13] arm64: allwinner: a64: Add MMC nodes, Corentin Labbe
      • Re: [PATCH v3 8/13] arm64: allwinner: a64: Add MMC nodes, Maxime Ripard
  • [PATCH v3 9/13] arm64: allwinner: a64: Add MMC pinctrl nodes, Maxime Ripard
  • [PATCH v3 10/13] arm64: allwinner: a64: Increase the MMC max frequency, Maxime Ripard
  • [PATCH v3 3/13] mmc: sunxi: Always set signal delay to 0 for A64, Maxime Ripard
    • Re: [PATCH v3 3/13] mmc: sunxi: Always set signal delay to 0 for A64, Ulf Hansson
      • Re: [PATCH v3 3/13] mmc: sunxi: Always set signal delay to 0 for A64, Andre Przywara
      • Re: [PATCH v3 3/13] mmc: sunxi: Always set signal delay to 0 for A64, Maxime Ripard
  • [PATCH v3 6/13] mmc: sunxi: Add EMMC (MMC2) controller compatible, Maxime Ripard
  • [PATCH v3 4/13] mmc: sunxi: Enable the new timings for the A64 MMC controllers, Maxime Ripard
  • [PATCH v3 1/13] mmc: sunxi: Fix clock frequency change sequence, Maxime Ripard
    • Re: [PATCH v3 1/13] mmc: sunxi: Fix clock frequency change sequence, Ulf Hansson
      • Re: [PATCH v3 1/13] mmc: sunxi: Fix clock frequency change sequence, Maxime Ripard
  • Re: [PATCH v3 0/13] arm64: allwinner: a64: Enable MMC support, Maxime Ripard
• [PATCH v2 RESEND] sdhci: Ignore unexpected CARD_INT interrupts, Gabriel Krisman Bertazi
  • Re: [PATCH v2 RESEND] sdhci: Ignore unexpected CARD_INT interrupts, Adrian Hunter
  • Re: [PATCH v2 RESEND] sdhci: Ignore unexpected CARD_INT interrupts, Ulf Hansson
    • Re: [PATCH v2 RESEND] sdhci: Ignore unexpected CARD_INT interrupts, Gabriel Krisman Bertazi
      • Re: [PATCH v2 RESEND] sdhci: Ignore unexpected CARD_INT interrupts, Ulf Hansson
        • Re: [PATCH v2 RESEND] sdhci: Ignore unexpected CARD_INT interrupts, Gabriel Krisman Bertazi
          • Re: [PATCH v2 RESEND] sdhci: Ignore unexpected CARD_INT interrupts, Adrian Hunter
            • Re: [PATCH v2 RESEND] sdhci: Ignore unexpected CARD_INT interrupts, Gabriel Krisman Bertazi
              • Re: [PATCH v2 RESEND] sdhci: Ignore unexpected CARD_INT interrupts, Ulf Hansson
• [PATCH] brcmfmac: add support for BCM43455 with modalias sdio:c00v02D0dA9BF, Martin Blumenstingl
  • Re: [PATCH] brcmfmac: add support for BCM43455 with modalias sdio:c00v02D0dA9BF, Arend Van Spriel
  • Re: brcmfmac: add support for BCM43455 with modalias sdio:c00v02D0dA9BF, Andreas Färber
  • Re: brcmfmac: add support for BCM43455 with modalias sdio:c00v02D0dA9BF, Kalle Valo
  • Re: [PATCH] brcmfmac: add support for BCM43455 with modalias sdio:c00v02D0dA9BF, Ulf Hansson
• [PATCH v3 0/9] mmc: mmci: add support for STM32 SD controller, Andrea Merello
  • [PATCH v3 4/9] mmc: mmci: add support for setting pad type via pinctrl, Andrea Merello
  • [PATCH v3 5/9] mmc: mmci: add STM32 variant, Andrea Merello
  • [PATCH v3 6/9] ARM: DTS: stm32: add pin map for SDIO controller on stm32f429, Andrea Merello
  • [PATCH v3 7/9] ARM: DTS: stm32: add node for SDIO controller on stm32f429, Andrea Merello
  • [PATCH v3 8/9] ARM: DTS: enable SDIO controller on stm32f469 disco board, Andrea Merello
  • [PATCH v3 1/9] mmc: mmci: don't pretend IP variants with only one IRQ to have two mask regs, Andrea Merello
    • Re: [PATCH v3 1/9] mmc: mmci: don't pretend IP variants with only one IRQ to have two mask regs, Ulf Hansson
      • Re: [PATCH v3 1/9] mmc: mmci: don't pretend IP variants with only one IRQ to have two mask regs, Andrea Merello
        • Re: [PATCH v3 1/9] mmc: mmci: don't pretend IP variants with only one IRQ to have two mask regs, Ulf Hansson
  • [PATCH v3 3/9] mmc: mmci: don't pretend all variants to have MCI_STARBITERR flag, Andrea Merello
  • [PATCH v3 2/9] mmc: mmci: add support for not-amba, but still compatible, variants, Andrea Merello
    • Re: [PATCH v3 2/9] mmc: mmci: add support for not-amba, but still compatible, variants, Ulf Hansson
      • Re: [PATCH v3 2/9] mmc: mmci: add support for not-amba, but still compatible, variants, Russell King - ARM Linux
        • Re: [PATCH v3 2/9] mmc: mmci: add support for not-amba, but still compatible, variants, Andrea Merello
          • Re: [PATCH v3 2/9] mmc: mmci: add support for not-amba, but still compatible, variants, Bruno Herrera
    • Re: [PATCH v3 2/9] mmc: mmci: add support for not-amba, but still compatible, variants, kbuild test robot
  • [PATCH v3 9/9] Documentation: document mmci STM32 DT binding, Andrea Merello
• FW: [PATCH] mmc-utils: modified FFU to use multiple write command, Arthur Simchaev
• [PATCH RFC] mmc: mxs-mmc: Implement CMD23 support, Stefan Wahren
  • Re: [PATCH RFC] mmc: mxs-mmc: Implement CMD23 support, Fabio Estevam
    • Re: [PATCH RFC] mmc: mxs-mmc: Implement CMD23 support, Stefan Wahren
  • Re: [PATCH RFC] mmc: mxs-mmc: Implement CMD23 support, Ulf Hansson
• [PATCH] mmc: wbsd: safer check if dma_addr is valid DMA address, Alexey Khoroshilov
  • Re: [PATCH] mmc: wbsd: safer check if dma_addr is valid DMA address, Ulf Hansson
• [PATCH v3 0/2] mmc: host: s3cmci: add device tree support, Sergio Prado
  • [PATCH v3 2/2] mmc: host: s3cmci: allow probing from device tree, Sergio Prado
    • Re: [PATCH v3 2/2] mmc: host: s3cmci: allow probing from device tree, Ulf Hansson
  • [PATCH v3 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller, Sergio Prado
    • Re: [PATCH v3 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller, Rob Herring
      • Re: [PATCH v3 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller, Sergio Prado
• [PATCH v3 00/15] mmc: core: A start to slim down public mmc headers, Ulf Hansson
  • [PATCH v3 01/15] ARM: pxa: Don't rely on public mmc header to include leds.h, Ulf Hansson
    • Re: [PATCH v3 01/15] ARM: pxa: Don't rely on public mmc header to include leds.h, Robert Jarzmik
      • Re: [PATCH v3 01/15] ARM: pxa: Don't rely on public mmc header to include leds.h, Ulf Hansson
        • Re: [PATCH v3 01/15] ARM: pxa: Don't rely on public mmc header to include leds.h, Robert Jarzmik
          • Re: [PATCH v3 01/15] ARM: pxa: Don't rely on public mmc header to include leds.h, Robert Jarzmik
            • Re: [PATCH v3 01/15] ARM: pxa: Don't rely on public mmc header to include leds.h, Ulf Hansson
              • Re: [PATCH v3 01/15] ARM: pxa: Don't rely on public mmc header to include leds.h, Robert Jarzmik
  • [PATCH v3 02/15] ARM: davinci: Don't rely on public mmc header to include leds.h, Ulf Hansson
    • Re: [PATCH v3 02/15] ARM: davinci: Don't rely on public mmc header to include leds.h, Sekhar Nori
  • [PATCH v3 03/15] ARM: davinci: Don't rely on public mmc header to include interrupt.h, Ulf Hansson
    • Re: [PATCH v3 03/15] ARM: davinci: Don't rely on public mmc header to include interrupt.h, Sekhar Nori
  • [PATCH v3 04/15] MIPS: Alchemy: Don't rely on public mmc header to include interrupt.h, Ulf Hansson
    • Re: [PATCH v3 04/15] MIPS: Alchemy: Don't rely on public mmc header to include interrupt.h, Ralf Baechle
  • [PATCH v3 05/15] mmc: core: First step in cleaning up public mmc header files, Ulf Hansson
    • Re: [PATCH v3 05/15] mmc: core: First step in cleaning up public mmc header files, Shawn Lin
  • [PATCH v3 06/15] mmc: core: First step in cleaning up private mmc header files, Ulf Hansson
    • Re: [PATCH v3 06/15] mmc: core: First step in cleaning up private mmc header files, Shawn Lin
  • [PATCH v3 07/15] mmc: core: Move public functions from core.h to private headers, Ulf Hansson
    • Re: [PATCH v3 07/15] mmc: core: Move public functions from core.h to private headers, Shawn Lin
      • Re: [PATCH v3 07/15] mmc: core: Move public functions from core.h to private headers, Ulf Hansson
  • [PATCH v3 08/15] mmc: core: Move some host specific public functions to host.h, Ulf Hansson
    • Re: [PATCH v3 08/15] mmc: core: Move some host specific public functions to host.h, Shawn Lin
  • [PATCH v3 09/15] mmc: core: Move erase/trim/discard defines from public core.h to mmc.h, Ulf Hansson
    • Re: [PATCH v3 09/15] mmc: core: Move erase/trim/discard defines from public core.h to mmc.h, Shawn Lin
      • Re: [PATCH v3 09/15] mmc: core: Move erase/trim/discard defines from public core.h to mmc.h, Ulf Hansson
  • [PATCH v3 10/15] mmc: core: Remove unused struct _mmc_csd from public mmc.h header, Ulf Hansson
    • Re: [PATCH v3 10/15] mmc: core: Remove unused struct _mmc_csd from public mmc.h header, Shawn Lin
      • Re: [PATCH v3 10/15] mmc: core: Remove unused struct _mmc_csd from public mmc.h header, Ulf Hansson
  • [PATCH v3 11/15] mmc: omap: Don't use mmc_card_present() when validating for inserted card, Ulf Hansson
  • [PATCH v3 12/15] mmc: vub300: Don't use mmc_card_present() when validating for inserted card, Ulf Hansson
  • [PATCH v3 13/15] mmc: core: Move public functions from card.h to private headers, Ulf Hansson
    • Re: [PATCH v3 13/15] mmc: core: Move public functions from card.h to private headers, Shawn Lin
  • [PATCH v3 15/15] mmc: core: Don't use extern declarations of public mmc functions, Ulf Hansson
    • Re: [PATCH v3 15/15] mmc: core: Don't use extern declarations of public mmc functions, Shawn Lin
  • [PATCH v3 14/15] mmc: core: Move public functions from host.h to private headers, Ulf Hansson
    • Re: [PATCH v3 14/15] mmc: core: Move public functions from host.h to private headers, Shawn Lin
  • Re: [PATCH v3 00/15] mmc: core: A start to slim down public mmc headers, Ulf Hansson
• [PATCH] mmc: core: Restore parts of the polling policy when switch to HS/HS DDR, Ulf Hansson
  • Re: [PATCH] mmc: core: Restore parts of the polling policy when switch to HS/HS DDR, Clemens Gruber
    • Re: [PATCH] mmc: core: Restore parts of the polling policy when switch to HS/HS DDR, Jagan Teki
  • Re: [PATCH] mmc: core: Restore parts of the polling policy when switch to HS/HS DDR, Shawn Lin
  • RE: [PATCH] mmc: core: Restore parts of the polling policy when switch to HS/HS DDR, Bough Chen
  • Re: [PATCH] mmc: core: Restore parts of the polling policy when switch to HS/HS DDR, Dong Aisheng
    • Re: [PATCH] mmc: core: Restore parts of the polling policy when switch to HS/HS DDR, Ulf Hansson
      • Re: [PATCH] mmc: core: Restore parts of the polling policy when switch to HS/HS DDR, Dong Aisheng
  • Re: [PATCH] mmc: core: Restore parts of the polling policy when switch to HS/HS DDR, Ulf Hansson
• [PATCH v3] mmc: sdhci-acpi: support deferred probe, Zhang Rui
  • Re: [PATCH v3] mmc: sdhci-acpi: support deferred probe, Ulf Hansson
    • Re: [PATCH v3] mmc: sdhci-acpi: support deferred probe, Zhang Rui
• [PATCH v3 0/2] mmc: pwrseq: add support for Marvell SD8787 chip, Matt Ranostay
  • [PATCH v3 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Matt Ranostay
    • Re: [PATCH v3 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Shawn Lin
      • Re: [PATCH v3 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Matt Ranostay
        • Re: [PATCH v3 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Shawn Lin
          • Re: [PATCH v3 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Matt Ranostay
            • Re: [PATCH v3 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Ulf Hansson
    • Re: [PATCH v3 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Ulf Hansson
      • Re: [PATCH v3 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Kalle Valo
        • Re: [PATCH v3 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Ulf Hansson
      • Re: [PATCH v3 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Shawn Lin
        • Re: [PATCH v3 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Ulf Hansson
  • [PATCH v3 1/2] devicetree: document new marvell-8xxx and pwrseq-sd8787 options, Matt Ranostay
    • Re: [PATCH v3 1/2] devicetree: document new marvell-8xxx and pwrseq-sd8787 options, Rob Herring
  • <Possible follow-ups>
  • [PATCH v3 0/2] mmc: pwrseq: add support for Marvell SD8787 chip, Matt Ranostay
• [PATCH v2 0/2] mmc: pwrseq: add support for Marvell SD8787 chip, Matt Ranostay
  • [PATCH v2 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Matt Ranostay
    • Re: [PATCH v2 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, Matt Ranostay
    • Re: [PATCH v2 2/2] mmc: pwrseq: add support for Marvell SD8787 chip, kbuild test robot
  • [PATCH v2 1/2] devicetree: document vmmc-supply and mmc-pwrseq options, Matt Ranostay
    • Re: [PATCH v2 1/2] devicetree: document vmmc-supply and mmc-pwrseq options, Rob Herring
• [RFC PATCH] mmc: core: retry polling busy when response timeout occurs, Shawn Lin
  • Re: [RFC PATCH] mmc: core: retry polling busy when response timeout occurs, Dong Aisheng
    • Re: [RFC PATCH] mmc: core: retry polling busy when response timeout occurs, Shawn Lin
      • Re: [RFC PATCH] mmc: core: retry polling busy when response timeout occurs, Dong Aisheng
• [PATCH v5 1/2] mmc: dw_mmc: silent verbose log when calling from PM context, Shawn Lin
  • [PATCH v5 2/2] mmc: dw_mmc: force setup bus if active slots exist, Shawn Lin
    • Re: [PATCH v5 2/2] mmc: dw_mmc: force setup bus if active slots exist, Eddie Cai
      • Re: [PATCH v5 2/2] mmc: dw_mmc: force setup bus if active slots exist, Jaehoon Chung
        • Re: [PATCH v5 2/2] mmc: dw_mmc: force setup bus if active slots exist, Eddie Cai
  • Re: [PATCH v5 1/2] mmc: dw_mmc: silent verbose log when calling from PM context, ayaka
    • Re: [PATCH v5 1/2] mmc: dw_mmc: silent verbose log when calling from PM context, Shawn Lin
  • Re: [PATCH v5 1/2] mmc: dw_mmc: silent verbose log when calling from PM context, Jaehoon Chung
    • Re: [PATCH v5 1/2] mmc: dw_mmc: silent verbose log when calling from PM context, Shawn Lin
• [PATCH] mmc: core: set host's DDR52 timing when finishing switching voltage, Shawn Lin
• [PATCH v6] mmc: sdhci-pci: Add support for HS200 tuning mode on AMD, eMMC-4.5.1, Shyam Sundar S K
  • Re: [PATCH v6] mmc: sdhci-pci: Add support for HS200 tuning mode on AMD, eMMC-4.5.1, Adrian Hunter
  • Re: [PATCH v6] mmc: sdhci-pci: Add support for HS200 tuning mode on AMD, eMMC-4.5.1, Ulf Hansson
• [PATCH 0/2] Use data tune for CMD line tune, Yong Mao
  • [PATCH 1/2] mmc: mediatek: Use data tune for CMD line tune, Yong Mao
    • Re: [PATCH 1/2] mmc: mediatek: Use data tune for CMD line tune, Ulf Hansson
      • Re: [PATCH 1/2] mmc: mediatek: Use data tune for CMD line tune, Yong Mao
  • [PATCH 2/2] mmc: dt-bindings: update Mediatek MMC bindings, Yong Mao
    • Re: [PATCH 2/2] mmc: dt-bindings: update Mediatek MMC bindings, Ulf Hansson
    • Re: [PATCH 2/2] mmc: dt-bindings: update Mediatek MMC bindings, Rob Herring
• [PATCH v5 00/12] mmc: Add support to Marvell Xenon SD Host Controller, Gregory CLEMENT
  • [PATCH v5 05/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller, Gregory CLEMENT
    • Re: [PATCH v5 05/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller, Rob Herring
    • Re: [PATCH v5 05/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller, Ulf Hansson
      • Re: [PATCH v5 05/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller, Gregory CLEMENT
        • Re: [PATCH v5 05/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller, Ulf Hansson
          • Re: [PATCH v5 05/12] dt: bindings: Add bindings for Marvell Xenon SD Host Controller, Gregory CLEMENT
  • [PATCH v5 08/12] mmc: sdhci-xenon: Add SoC PHY PAD voltage control, Gregory CLEMENT
  • [PATCH v5 10/12] arm64: dts: marvell: add eMMC support for Armada 37xx, Gregory CLEMENT
  • [PATCH v5 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K, Gregory CLEMENT
  • [PATCH v5 07/12] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC., Gregory CLEMENT
    • Re: [PATCH v5 07/12] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC., Ulf Hansson
      • Re: [PATCH v5 07/12] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC., Ziji Hu
  • [PATCH v5 12/12] arm64: configs: enable SDHCI driver for Xenon, Gregory CLEMENT
  • [PATCH v5 06/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality, Gregory CLEMENT
    • Re: [PATCH v5 06/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality, Ulf Hansson
      • Re: [PATCH v5 06/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality, Adrian Hunter
        • Re: [PATCH v5 06/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality, Ulf Hansson
          • Re: [PATCH v5 06/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality, Adrian Hunter
            • Re: [PATCH v5 06/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality, Ulf Hansson
              • Re: [PATCH v5 06/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality, Adrian Hunter
                • Re: [PATCH v5 06/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality, Ulf Hansson
      • Re: [PATCH v5 06/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality, Ziji Hu
        • Re: [PATCH v5 06/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality, Ulf Hansson
          • Re: [PATCH v5 06/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality, Ziji Hu
  • [PATCH v5 09/12] MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers, Gregory CLEMENT
  • [PATCH v5 01/12] clk: apn806: Add eMMC clock to system controller driver, Gregory CLEMENT
    • Re: [PATCH v5 01/12] clk: apn806: Add eMMC clock to system controller driver, Stephen Boyd
  • [PATCH v5 04/12] mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c, Gregory CLEMENT
  • [PATCH v5 03/12] mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c, Gregory CLEMENT
  • [PATCH v5 02/12] mmc: sdhci: Export sdhci_set_ios() from sdhci.c, Gregory CLEMENT
• [PATCH v2 00/12] mmc: core: A start to slim down public mmc headers, Ulf Hansson
  • [PATCH v2 01/12] mmc: mxcmmc: Include interrupt.h in the platform data header, Ulf Hansson
  • [PATCH v2 02/12] mmc: core: First step in cleaning up public mmc header files, Ulf Hansson
  • [PATCH v2 03/12] mmc: core: First step in cleaning up private mmc header files, Ulf Hansson
  • [PATCH v2 04/12] mmc: core: Move public functions from core.h to private headers, Ulf Hansson
  • [PATCH v2 06/12] mmc: core: Move erase/trim/discard defines from public core.h to mmc.h, Ulf Hansson
  • [PATCH v2 05/12] mmc: core: Move some host specific public functions to host.h, Ulf Hansson
  • [PATCH v2 07/12] mmc: core: Remove unused struct _mmc_csd from public mmc.h header, Ulf Hansson
  • [PATCH v2 08/12] mmc: omap: Don't use mmc_card_present() when validating for inserted card, Ulf Hansson
  • [PATCH v2 10/12] mmc: core: Move public functions from card.h to private headers, Ulf Hansson
  • [PATCH v2 09/12] mmc: vub300: Don't use mmc_card_present() when validating for inserted card, Ulf Hansson
  • [PATCH v2 11/12] mmc: core: Move public functions from host.h to private headers, Ulf Hansson
  • [PATCH v2 12/12] mmc: core: Don't use extern declarations of public mmc functions, Ulf Hansson
  • Re: [PATCH v2 00/12] mmc: core: A start to slim down public mmc headers, Ulf Hansson
    • Re: [PATCH v2 00/12] mmc: core: A start to slim down public mmc headers, Ulf Hansson
• [GIT PULL] Update DWMMC controller, Jaehoon Chung
  • Re: [GIT PULL] Update DWMMC controller, Ulf Hansson
  • <Possible follow-ups>
  • [GIT PULL] Update DWMMC controller, Jaehoon Chung
    • Re: [GIT PULL] Update DWMMC controller, Ulf Hansson
  • [GIT PULL] Update DWMMC controller, Jaehoon Chung
    • Re: [GIT PULL] Update DWMMC controller, Ulf Hansson
  • [GIT PULL] Update DWMMC controller, Jaehoon Chung
    • Re: [GIT PULL] Update DWMMC controller, Ulf Hansson
• [PATCH] mmc: vub300: Remove bogus check of irqs_queued, Shawn Lin
  • Re: [PATCH] mmc: vub300: Remove bogus check of irqs_queued, Ulf Hansson
• [RESEND PATCH v2] mmc: sdhci-acpi: support deferred probe, Zhang Rui
  • Re: [RESEND PATCH v2] mmc: sdhci-acpi: support deferred probe, Adrian Hunter
• [PATCH v2] mmc: sdhci-acpi: support deferred probe, Zhang Rui
• [PATCH] mmc: tmio: Remove redundant check of mmc->slot.cd_irq, Ulf Hansson
  • Re: [PATCH] mmc: tmio: Remove redundant check of mmc->slot.cd_irq, Ulf Hansson
  • Re: [PATCH] mmc: tmio: Remove redundant check of mmc->slot.cd_irq, Wolfram Sang
• [PATCH v5] mmc: sdhci-pci: Add support for HS200 tuning mode on AMD eMMC-4.5.1, Shyam Sundar S K
  • Re: [PATCH v5] mmc: sdhci-pci: Add support for HS200 tuning mode on AMD eMMC-4.5.1, Adrian Hunter
• [PATCH v2 0/9] mmc: mmci: add support for STM32 SD controller, Andrea Merello
  • [PATCH v2 1/9] mmc: mmci: don't pretend IP variants with only one IRQ to have two mask regs, Andrea Merello
  • [PATCH v2 2/9] mmc: mmci: add support for not-amba, but still compatible, variants, Andrea Merello
  • [PATCH v2 3/9] mmc: mmci: don't pretend all variants to have MCI_STARBITERR flag, Andrea Merello
  • [PATCH v2 4/9] mmc: mmci: add support for setting pad type via pinctrl, Andrea Merello
  • [PATCH v2 5/9] mmc: mmci: add STM32 variant, Andrea Merello
  • [PATCH v2 6/9] DT: stm32f429: add pin map for SDIO controller, Andrea Merello
    • Re: [PATCH v2 6/9] DT: stm32f429: add pin map for SDIO controller, Alexandre Torgue
  • [PATCH v2 7/9] DT: stm32f429: add node for SDIO controller, Andrea Merello
    • Re: [PATCH v2 7/9] DT: stm32f429: add node for SDIO controller, Alexandre Torgue
  • [PATCH v2 8/9] DT: stm32f469-disco: add node for SDIO controller, Andrea Merello
    • Re: [PATCH v2 8/9] DT: stm32f469-disco: add node for SDIO controller, Alexandre Torgue
      • Re: [PATCH v2 8/9] DT: stm32f469-disco: add node for SDIO controller, Andrea Merello
        • Re: [PATCH v2 8/9] DT: stm32f469-disco: add node for SDIO controller, Alexandre Torgue
          • Re: [PATCH v2 8/9] DT: stm32f469-disco: add node for SDIO controller, Andrea Merello
      • Re: [PATCH v2 8/9] DT: stm32f469-disco: add node for SDIO controller, Andrea Merello
        • Re: [PATCH v2 8/9] DT: stm32f469-disco: add node for SDIO controller, Alexandre Torgue
          • Re: [PATCH v2 8/9] DT: stm32f469-disco: add node for SDIO controller, Andrea Merello
            • Re: [PATCH v2 8/9] DT: stm32f469-disco: add node for SDIO controller, Alexandre Torgue
              • Re: [PATCH v2 8/9] DT: stm32f469-disco: add node for SDIO controller, Andrea Merello
  • [PATCH v2 9/9] Documentation: document mmci STM32 DT binding, Andrea Merello
• [RESEND PATCHv1 0/8] mmc: sdhci-msm: Provide support for enhanced strobe, Ritesh Harjani
  • [RESEND PATCHv1 8/8] mmc: sdhci-msm: Provide enhanced_strobe mode feature support, Ritesh Harjani
    • Re: [RESEND PATCHv1 8/8] mmc: sdhci-msm: Provide enhanced_strobe mode feature support, Adrian Hunter
  • [RESEND PATCHv1 6/8] mmc: sdhci: Clear SDHCI_HS400_TUNING flag after platform_execute_tuning, Ritesh Harjani
    • Re: [RESEND PATCHv1 6/8] mmc: sdhci: Clear SDHCI_HS400_TUNING flag after platform_execute_tuning, Adrian Hunter
      • Re: [RESEND PATCHv1 6/8] mmc: sdhci: Clear SDHCI_HS400_TUNING flag after platform_execute_tuning, Ritesh Harjani
  • [RESEND PATCHv1 7/8] mmc: sdhci-msm: Make HS400 tuning follow as per recommeneded HW sequence, Ritesh Harjani
    • Re: [RESEND PATCHv1 7/8] mmc: sdhci-msm: Make HS400 tuning follow as per recommeneded HW sequence, Adrian Hunter
  • [RESEND PATCHv1 5/8] mmc: sdhci-msm: configure CORE_CSR_CDC_DELAY_CFG to recommended value, Ritesh Harjani
    • Re: [RESEND PATCHv1 5/8] mmc: sdhci-msm: configure CORE_CSR_CDC_DELAY_CFG to recommended value, Adrian Hunter
    • Re: [RESEND PATCHv1 5/8] mmc: sdhci-msm: configure CORE_CSR_CDC_DELAY_CFG to recommended value, Stephen Boyd
      • Re: [RESEND PATCHv1 5/8] mmc: sdhci-msm: configure CORE_CSR_CDC_DELAY_CFG to recommended value, Ritesh Harjani
  • [RESEND PATCHv1 4/8] mmc: sdhci-msm: Reset vendor specific func register on probe, Ritesh Harjani
    • Re: [RESEND PATCHv1 4/8] mmc: sdhci-msm: Reset vendor specific func register on probe, Adrian Hunter
  • [RESEND PATCHv1 3/8] mmc: sdhci-msm: Factor out sdhci_msm_hs400, Ritesh Harjani
    • Re: [RESEND PATCHv1 3/8] mmc: sdhci-msm: Factor out sdhci_msm_hs400, Adrian Hunter
  • [RESEND PATCHv1 2/8] mmc: sdhci-msm: Factor out function to set/get msm clock rate, Ritesh Harjani
    • Re: [RESEND PATCHv1 2/8] mmc: sdhci-msm: Factor out function to set/get msm clock rate, Adrian Hunter
  • [RESEND PATCHv1 1/8] mmc: sdhci-msm: Factor out sdhci_msm_hc_select_mode, Ritesh Harjani
    • Re: [RESEND PATCHv1 1/8] mmc: sdhci-msm: Factor out sdhci_msm_hc_select_mode, Adrian Hunter
  • Re: [RESEND PATCHv1 0/8] mmc: sdhci-msm: Provide support for enhanced strobe, Jeremy McNicoll
    • Re: [RESEND PATCHv1 0/8] mmc: sdhci-msm: Provide support for enhanced strobe, Ritesh Harjani
  • Re: [RESEND PATCHv1 0/8] mmc: sdhci-msm: Provide support for enhanced strobe, Ulf Hansson
    • Re: [RESEND PATCHv1 0/8] mmc: sdhci-msm: Provide support for enhanced strobe, Ritesh Harjani
• [RESEND RFC 0/3] mmc: sdhci: sdhci-msm: Add more debug logs, Ritesh Harjani
  • [RESEND RFC 2/3] mmc: sdhci-msm: Implement platform_dumpregs callback in sdhci-msm, Ritesh Harjani
    • Re: [RESEND RFC 2/3] mmc: sdhci-msm: Implement platform_dumpregs callback in sdhci-msm, Adrian Hunter
      • Re: [RESEND RFC 2/3] mmc: sdhci-msm: Implement platform_dumpregs callback in sdhci-msm, Ritesh Harjani
  • [RESEND RFC 3/3] mmc: sdhci: Add more debug info in case of data error, Ritesh Harjani
    • Re: [RESEND RFC 3/3] mmc: sdhci: Add more debug info in case of data error, Adrian Hunter
      • Re: [RESEND RFC 3/3] mmc: sdhci: Add more debug info in case of data error, Ritesh Harjani
  • [RESEND RFC 1/3] mmc: sdhci: Add platform_dumpregs callback support to sdhci_ops., Ritesh Harjani
    • Re: [RESEND RFC 1/3] mmc: sdhci: Add platform_dumpregs callback support to sdhci_ops., Shawn Lin
      • Re: [RESEND RFC 1/3] mmc: sdhci: Add platform_dumpregs callback support to sdhci_ops., Ritesh Harjani
        • Re: [RESEND RFC 1/3] mmc: sdhci: Add platform_dumpregs callback support to sdhci_ops., Adrian Hunter
          • Re: [RESEND RFC 1/3] mmc: sdhci: Add platform_dumpregs callback support to sdhci_ops., Ritesh Harjani
• [PATCH v2 0/6] arm64: allwinner: a64: Enable MMC support, Maxime Ripard
  • [PATCH v2 1/6] mmc: sunxi: Always set signal delay to 0 for A64, Maxime Ripard
    • Re: [PATCH v2 1/6] mmc: sunxi: Always set signal delay to 0 for A64, André Przywara
      • Re: [PATCH v2 1/6] mmc: sunxi: Always set signal delay to 0 for A64, Maxime Ripard
  • [PATCH v2 2/6] mmc: sunxi: Enable the new timings for the A64 MMC controllers, Maxime Ripard
  • [PATCH v2 6/6] arm64: allwinner: a64: Increase the MMC max frequency, Maxime Ripard
    • Re: [PATCH v2 6/6] arm64: allwinner: a64: Increase the MMC max frequency, Chen-Yu Tsai
      • Re: [PATCH v2 6/6] arm64: allwinner: a64: Increase the MMC max frequency, Maxime Ripard
        • Re: [PATCH v2 6/6] arm64: allwinner: a64: Increase the MMC max frequency, Chen-Yu Tsai
          • Re: [PATCH v2 6/6] arm64: allwinner: a64: Increase the MMC max frequency, Maxime Ripard
  • [PATCH v2 5/6] arm64: allwinner: a64: Add MMC pinctrl nodes, Maxime Ripard
    • Re: [PATCH v2 5/6] arm64: allwinner: a64: Add MMC pinctrl nodes, André Przywara
  • [PATCH v2 3/6] mmc: sunxi: Add EMMC (MMC2) controller compatible, Maxime Ripard
  • [PATCH v2 4/6] arm64: allwinner: a64: Add MMC nodes, Maxime Ripard
• [BUG] Boot failure since df9bcc2bc on veyron_speedy, S. Gilles
  • Re: [BUG] Boot failure since df9bcc2bc on veyron_speedy, S. Gilles
    • Re: [BUG] Boot failure since df9bcc2bc on veyron_speedy, Shawn Lin
      • Re: [BUG] Boot failure since df9bcc2bc on veyron_speedy, S. Gilles
        • Re: [BUG] Boot failure since df9bcc2bc on veyron_speedy, Ziyuan
          • Re: [BUG] Boot failure since df9bcc2bc on veyron_speedy, Jaehoon Chung
            • Re: [BUG] Boot failure since df9bcc2bc on veyron_speedy, S. Gilles
• Vault open source file & storage conference CFP, Christoph Hellwig
• [RFC PATCH v2 1/2] mmc: sdio: Factor out retry init card helper function, Shawn Lin
  • [RFC PATCH v2 2/2] mmc: sdio: don't use rocr to check if the card could support UHS mode, Shawn Lin
    • Re: [RFC PATCH v2 2/2] mmc: sdio: don't use rocr to check if the card could support UHS mode, Ulf Hansson
  • Re: [RFC PATCH v2 1/2] mmc: sdio: Factor out retry init card helper function, Ulf Hansson
• [PATCH 0/8] MMC-core: Fine-tuning for some function implementations, SF Markus Elfring
  • [PATCH 2/8] mmc-core: Fix a typo in a comment line, SF Markus Elfring
    • Re: [PATCH 2/8] mmc-core: Fix a typo in a comment line, Linus Walleij
    • Re: [PATCH 2/8] mmc-core: Fix a typo in a comment line, Shawn Lin
  • [PATCH 1/8] mmc-core: Use kmalloc_array() in mmc_test_area_init(), SF Markus Elfring
    • Re: [PATCH 1/8] mmc-core: Use kmalloc_array() in mmc_test_area_init(), Linus Walleij
      • Re: [PATCH 1/8] mmc-core: Use kmalloc_array() in mmc_test_area_init(), Chunyan Zhang
    • Re: [PATCH 1/8] mmc-core: Use kmalloc_array() in mmc_test_area_init(), Shawn Lin
    • Re: [PATCH 1/8] mmc-core: Use kmalloc_array() in mmc_test_area_init(), Andy Shevchenko
  • [PATCH 4/8] mmc/core/mmc_test: Add some spaces for better code readability, SF Markus Elfring
    • Re: [PATCH 4/8] mmc/core/mmc_test: Add some spaces for better code readability, Linus Walleij
    • Re: [PATCH 4/8] mmc/core/mmc_test: Add some spaces for better code readability, Shawn Lin
  • [PATCH 3/8] mmc-core: Use seq_puts() in mtf_testlist_show(), SF Markus Elfring
    • Re: [PATCH 3/8] mmc-core: Use seq_puts() in mtf_testlist_show(), Linus Walleij
    • Re: [PATCH 3/8] mmc-core: Use seq_puts() in mtf_testlist_show(), Shawn Lin
  • [PATCH 5/8] mmc/core/mmc_test: Combine substrings for 5 messages, SF Markus Elfring
    • Re: [PATCH 5/8] mmc/core/mmc_test: Combine substrings for 5 messages, Linus Walleij
    • Re: [PATCH 5/8] mmc/core/mmc_test: Combine substrings for 5 messages, Shawn Lin
  • [PATCH 7/8] mmc-core: Use kcalloc() in mmc_test_alloc_mem(), SF Markus Elfring
    • Re: [PATCH 7/8] mmc-core: Use kcalloc() in mmc_test_alloc_mem(), Linus Walleij
    • Re: [PATCH 7/8] mmc-core: Use kcalloc() in mmc_test_alloc_mem(), Shawn Lin
  • [PATCH 6/8] mmc/core/mmc_test: Improve a size determination in five functions, SF Markus Elfring
    • Re: [PATCH 6/8] mmc/core/mmc_test: Improve a size determination in five functions, Linus Walleij
    • Re: [PATCH 6/8] mmc/core/mmc_test: Improve a size determination in five functions, Shawn Lin
  • [PATCH 8/8] mmc-core: Use kmalloc_array() in mmc_alloc_sg(), SF Markus Elfring
    • Re: [PATCH 8/8] mmc-core: Use kmalloc_array() in mmc_alloc_sg(), Linus Walleij
    • Re: [PATCH 8/8] mmc-core: Use kmalloc_array() in mmc_alloc_sg(), Shawn Lin
  • Re: [PATCH 0/8] MMC-core: Fine-tuning for some function implementations, Ulf Hansson
• [PATCH v2] sdhci: Ignore unexpected CARD_INT interrupts, Gabriel Krisman Bertazi
• [PATCH] [linux-next] Docs: DT: MMC: Fix typo in mmc, Masanari Iida
  • Re: [PATCH] [linux-next] Docs: DT: MMC: Fix typo in mmc, Ulf Hansson
• [PATCH] mmc: host: tmio: drop superfluous exit path, Wolfram Sang
  • Re: [PATCH] mmc: host: tmio: drop superfluous exit path, Simon Horman
  • Re: [PATCH] mmc: host: tmio: drop superfluous exit path, Ulf Hansson
• [PATCH v9 0/5] Add intial support to DW MMC host on ZTE SoC, Jun Nie
  • [PATCH v9 1/5] Documentation: synopsys-dw-mshc: add binding for fifo quirks, Jun Nie
  • [PATCH v9 2/5] mmc: dw: Add fifo address property, Jun Nie
  • [PATCH v9 3/5] mmc: dw: Add fifo watermark alignment property, Jun Nie
  • [PATCH v9 4/5] mmc: dt-bindings: add ZTE ZX296718 MMC bindings, Jun Nie
  • [PATCH v9 5/5] mmc: zx: Initial support for ZX mmc controller, Jun Nie