Hi Maxime, On 01/26/2017 10:06 AM, Maxime Ripard wrote: > The eMMC controller seem to have a maximum frequency of 200MHz, while the > regular MMC controllers are capped at 150MHz. > > Since older SoCs cannot go that high, we cannot change the default maximum > frequency, but fortunately for us we have a property for that in the DT. > > This also has the side effect of allowing to use the MMC HS200 and SD > SDR104 modes for the boards that support it (with either 1.2v or 1.8v IOs). > > Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> > > arm64: allwinner: a64: Limit MMC0 and MMC1 rates to 150MHz > > Trying to set the bus to 200MHz on MMC1 when doing SDIO is failing. > Allwinner sets the maximum for this bus to 150MHz, so enforce that limit. > > This hasn't been tested with MMC0, but the documented limit is the same, > and I expect the behaviour to be the same. > > Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> I suspect that you are trying to increase your number of Signed-off-by tags by using unfair means :) Otherwise the squashed commit message is probably worth some cleaning. Best, Florian > --- > arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 3 +++ > 1 file changed, 3 insertions(+), 0 deletions(-) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > index 7b79c319ad3c..cb3e0cf2191a 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > @@ -130,6 +130,7 @@ > resets = <&ccu RST_BUS_MMC0>; > reset-names = "ahb"; > interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; > + max-frequency = <150000000>; > status = "disabled"; > #address-cells = <1>; > #size-cells = <0>; > @@ -143,6 +144,7 @@ > resets = <&ccu RST_BUS_MMC1>; > reset-names = "ahb"; > interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; > + max-frequency = <150000000>; > status = "disabled"; > #address-cells = <1>; > #size-cells = <0>; > @@ -156,6 +158,7 @@ > resets = <&ccu RST_BUS_MMC2>; > reset-names = "ahb"; > interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; > + max-frequency = <200000000>; > status = "disabled"; > #address-cells = <1>; > #size-cells = <0>; > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html