Heiner Kallweit <hkallweit1@xxxxxxxxx> writes: > I don't think this clk_disable_unprepare is right here. We do this > in meson_mmc_remove what should be sufficient. I don't think so, because if _clk_init() fails, then _probe will fail, and the driver's ->remove() will not be called. Kevin > Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> > --- > drivers/mmc/host/meson-gx-mmc.c | 6 +----- > 1 file changed, 1 insertion(+), 5 deletions(-) > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index 74ceda75..39904fb5 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -315,11 +315,7 @@ static int meson_mmc_clk_init(struct meson_host *host) > /* Get the nearest minimum clock to 400KHz */ > host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000); > > - ret = meson_mmc_clk_set(host, host->mmc->f_min); > - if (!ret) > - clk_disable_unprepare(host->cfg_div_clk); > - > - return ret; > + return meson_mmc_clk_set(host, host->mmc->f_min); > } > > static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
