Factor out data preparation into a separate function mmc_blk_data_prep()
which can be re-used for command queuing.
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
drivers/mmc/core/block.c | 151 +++++++++++++++++++++++++----------------------
1 file changed, 82 insertions(+), 69 deletions(-)
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index d6dfaebb84ee..17c19387bf84 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1438,36 +1438,39 @@ static enum mmc_blk_status mmc_blk_err_check(struct mmc_card *card,
return MMC_BLK_SUCCESS;
}
-static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
- struct mmc_card *card,
- int disable_multi,
- struct mmc_queue *mq)
+static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
+ int disable_multi, bool *do_rel_wr,
+ bool *do_data_tag)
{
- u32 readcmd, writecmd;
+ struct mmc_blk_data *md = mq->blkdata;
+ struct mmc_card *card = md->queue.card;
struct mmc_blk_request *brq = &mqrq->brq;
struct request *req = mqrq->req;
- struct mmc_blk_data *md = mq->blkdata;
- bool do_data_tag;
/*
* Reliable writes are used to implement Forced Unit Access and
* are supported only on MMCs.
*/
- bool do_rel_wr = (req->cmd_flags & REQ_FUA) &&
- (rq_data_dir(req) == WRITE) &&
- (md->flags & MMC_BLK_REL_WR);
+ *do_rel_wr = (req->cmd_flags & REQ_FUA) &&
+ rq_data_dir(req) == WRITE &&
+ (md->flags & MMC_BLK_REL_WR);
memset(brq, 0, sizeof(struct mmc_blk_request));
- brq->mrq.cmd = &brq->cmd;
+
brq->mrq.data = &brq->data;
- brq->cmd.arg = blk_rq_pos(req);
- if (!mmc_card_blockaddr(card))
- brq->cmd.arg <<= 9;
- brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
- brq->data.blksz = 512;
brq->stop.opcode = MMC_STOP_TRANSMISSION;
brq->stop.arg = 0;
+
+ if (rq_data_dir(req) == READ) {
+ brq->data.flags = MMC_DATA_READ;
+ brq->stop.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ } else {
+ brq->data.flags = MMC_DATA_WRITE;
+ brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+ }
+
+ brq->data.blksz = 512;
brq->data.blocks = blk_rq_sectors(req);
/*
@@ -1498,6 +1501,68 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
brq->data.blocks);
}
+ if (*do_rel_wr)
+ mmc_apply_rel_rw(brq, card, req);
+
+ /*
+ * Data tag is used only during writing meta data to speed
+ * up write and any subsequent read of this meta data
+ */
+ *do_data_tag = card->ext_csd.data_tag_unit_size &&
+ (req->cmd_flags & REQ_META) &&
+ (rq_data_dir(req) == WRITE) &&
+ ((brq->data.blocks * brq->data.blksz) >=
+ card->ext_csd.data_tag_unit_size);
+
+ mmc_set_data_timeout(&brq->data, card);
+
+ brq->data.sg = mqrq->sg;
+ brq->data.sg_len = mmc_queue_map_sg(mq, mqrq);
+
+ /*
+ * Adjust the sg list so it is the same size as the
+ * request.
+ */
+ if (brq->data.blocks != blk_rq_sectors(req)) {
+ int i, data_size = brq->data.blocks << 9;
+ struct scatterlist *sg;
+
+ for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) {
+ data_size -= sg->length;
+ if (data_size <= 0) {
+ sg->length += data_size;
+ i++;
+ break;
+ }
+ }
+ brq->data.sg_len = i;
+ }
+
+ mqrq->areq.mrq = &brq->mrq;
+
+ mmc_queue_bounce_pre(mqrq);
+}
+
+static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
+ struct mmc_card *card,
+ int disable_multi,
+ struct mmc_queue *mq)
+{
+ u32 readcmd, writecmd;
+ struct mmc_blk_request *brq = &mqrq->brq;
+ struct request *req = mqrq->req;
+ struct mmc_blk_data *md = mq->blkdata;
+ bool do_rel_wr, do_data_tag;
+
+ mmc_blk_data_prep(mq, mqrq, disable_multi, &do_rel_wr, &do_data_tag);
+
+ brq->mrq.cmd = &brq->cmd;
+
+ brq->cmd.arg = blk_rq_pos(req);
+ if (!mmc_card_blockaddr(card))
+ brq->cmd.arg <<= 9;
+ brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
if (brq->data.blocks > 1 || do_rel_wr) {
/* SPI multiblock writes terminate using a special
* token, not a STOP_TRANSMISSION request.
@@ -1512,32 +1577,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
readcmd = MMC_READ_SINGLE_BLOCK;
writecmd = MMC_WRITE_BLOCK;
}
- if (rq_data_dir(req) == READ) {
- brq->cmd.opcode = readcmd;
- brq->data.flags = MMC_DATA_READ;
- if (brq->mrq.stop)
- brq->stop.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |
- MMC_CMD_AC;
- } else {
- brq->cmd.opcode = writecmd;
- brq->data.flags = MMC_DATA_WRITE;
- if (brq->mrq.stop)
- brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |
- MMC_CMD_AC;
- }
-
- if (do_rel_wr)
- mmc_apply_rel_rw(brq, card, req);
-
- /*
- * Data tag is used only during writing meta data to speed
- * up write and any subsequent read of this meta data
- */
- do_data_tag = (card->ext_csd.data_tag_unit_size) &&
- (req->cmd_flags & REQ_META) &&
- (rq_data_dir(req) == WRITE) &&
- ((brq->data.blocks * brq->data.blksz) >=
- card->ext_csd.data_tag_unit_size);
+ brq->cmd.opcode = rq_data_dir(req) == READ ? readcmd : writecmd;
/*
* Pre-defined multi-block transfers are preferable to
@@ -1568,34 +1608,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
brq->mrq.sbc = &brq->sbc;
}
- mmc_set_data_timeout(&brq->data, card);
-
- brq->data.sg = mqrq->sg;
- brq->data.sg_len = mmc_queue_map_sg(mq, mqrq);
-
- /*
- * Adjust the sg list so it is the same size as the
- * request.
- */
- if (brq->data.blocks != blk_rq_sectors(req)) {
- int i, data_size = brq->data.blocks << 9;
- struct scatterlist *sg;
-
- for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) {
- data_size -= sg->length;
- if (data_size <= 0) {
- sg->length += data_size;
- i++;
- break;
- }
- }
- brq->data.sg_len = i;
- }
-
- mqrq->areq.mrq = &brq->mrq;
mqrq->areq.err_check = mmc_blk_err_check;
-
- mmc_queue_bounce_pre(mqrq);
}
static bool mmc_blk_rw_cmd_err(struct mmc_blk_data *md, struct mmc_card *card,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
