Ensure all debug prints start with the mmc host name.
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
drivers/mmc/host/sdhci.c | 28 ++++++++++++----------------
1 file changed, 12 insertions(+), 16 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6fdd7a70f229..8aa8541a349a 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -37,7 +37,7 @@
#define DRIVER_NAME "sdhci"
#define DBG(f, x...) \
- pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
+ pr_debug("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x)
#define MAX_TUNING_LOOP 40
@@ -715,8 +715,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
}
if (count >= 0xF) {
- DBG("%s: Too large timeout 0x%x requested for CMD%d!\n",
- mmc_hostname(host->mmc), count, cmd->opcode);
+ DBG("Too large timeout 0x%x requested for CMD%d!\n",
+ count, cmd->opcode);
count = 0xE;
}
@@ -2509,7 +2509,6 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
#ifdef CONFIG_MMC_DEBUG
static void sdhci_adma_show_error(struct sdhci_host *host)
{
- const char *name = mmc_hostname(host->mmc);
void *desc = host->adma_table;
sdhci_dumpregs(host);
@@ -2518,14 +2517,14 @@ static void sdhci_adma_show_error(struct sdhci_host *host)
struct sdhci_adma2_64_desc *dma_desc = desc;
if (host->flags & SDHCI_USE_64_BIT_DMA)
- DBG("%s: %p: DMA 0x%08x%08x, LEN 0x%04x, Attr=0x%02x\n",
- name, desc, le32_to_cpu(dma_desc->addr_hi),
+ DBG("%p: DMA 0x%08x%08x, LEN 0x%04x, Attr=0x%02x\n",
+ desc, le32_to_cpu(dma_desc->addr_hi),
le32_to_cpu(dma_desc->addr_lo),
le16_to_cpu(dma_desc->len),
le16_to_cpu(dma_desc->cmd));
else
- DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
- name, desc, le32_to_cpu(dma_desc->addr_lo),
+ DBG("%p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
+ desc, le32_to_cpu(dma_desc->addr_lo),
le16_to_cpu(dma_desc->len),
le16_to_cpu(dma_desc->cmd));
@@ -2641,10 +2640,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
SDHCI_DEFAULT_BOUNDARY_SIZE;
host->data->bytes_xfered = dmanow - dmastart;
- DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes,"
- " next 0x%08x\n",
- mmc_hostname(host->mmc), dmastart,
- host->data->bytes_xfered, dmanow);
+ DBG("DMA base 0x%08x, transferred 0x%06x bytes, next 0x%08x\n",
+ dmastart, host->data->bytes_xfered, dmanow);
sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
}
@@ -2689,8 +2686,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
SDHCI_INT_BUS_POWER);
sdhci_writel(host, mask, SDHCI_INT_STATUS);
- DBG("*** %s got interrupt: 0x%08x\n",
- mmc_hostname(host->mmc), intmask);
+ DBG("IRQ status 0x%08x\n", intmask);
if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
@@ -3324,9 +3320,9 @@ int sdhci_setup_host(struct sdhci_host *host)
!(host->flags & SDHCI_USE_SDMA)) &&
!(host->quirks2 & SDHCI_QUIRK2_ACMD23_BROKEN)) {
host->flags |= SDHCI_AUTO_CMD23;
- DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc));
+ DBG("Auto-CMD23 available\n");
} else {
- DBG("%s: Auto-CMD23 unavailable\n", mmc_hostname(mmc));
+ DBG("Auto-CMD23 unavailable\n");
}
/*
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
