On 2017/1/27 7:37, Gerd Hoffmann wrote:
Signed-off-by: Gerd Hoffmann <kraxel@xxxxxxxxxx>
---
drivers/mmc/host/bcm2835.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
index fc2d02f..82caddc 100644
--- a/drivers/mmc/host/bcm2835.c
+++ b/drivers/mmc/host/bcm2835.c
@@ -147,7 +147,7 @@ struct bcm2835_host {
u32 pio_timeout; /* In jiffies */
int clock; /* Current clock speed */
unsigned int max_clk; /* Max possible freq */
- struct timer_list timer; /* Timer for timeouts */
+ struct delayed_work timeout_work; /* Timer for timeouts */
struct sg_mapping_iter sg_miter; /* SG state for PIO */
unsigned int blocks; /* remaining PIO blocks */
int irq; /* Device IRQ */
@@ -669,12 +669,11 @@ bool bcm2835_send_command(struct bcm2835_host *host,
return false;
}
- timeout = jiffies;
if (!cmd->data && cmd->busy_timeout > 9000)
- timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
+ timeout = DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
You should elaborate more to help folks understand
what you want to do here...
else
- timeout += 10 * HZ;
- mod_timer(&host->timer, timeout);
+ timeout = 10 * HZ;
+ schedule_delayed_work(&host->timeout_work, timeout);
host->cmd = cmd;
@@ -912,9 +911,11 @@ static void bcm2835_finish_command(struct bcm2835_host *host)
}
}
-static void bcm2835_timeout(unsigned long data)
+static void bcm2835_timeout(struct work_struct *work)
{
- struct bcm2835_host *host = (struct bcm2835_host *)data;
+ struct delayed_work *d = to_delayed_work(work);
+ struct bcm2835_host *host =
+ container_of(d, struct bcm2835_host, timeout_work);
struct device *dev = &host->pdev->dev;
mutex_lock(&host->mutex);
@@ -1303,7 +1304,7 @@ static void bcm2835_finish_request(struct bcm2835_host *host)
struct dma_chan *terminate_chan = NULL;
struct mmc_request *mrq;
- del_timer(&host->timer);
+ cancel_delayed_work(&host->timeout_work);
mrq = host->mrq;
@@ -1387,8 +1388,7 @@ int bcm2835_add_host(struct bcm2835_host *host)
/* report supported voltage ranges */
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- setup_timer(&host->timer, bcm2835_timeout,
- (unsigned long)host);
+ INIT_DELAYED_WORK(&host->timeout_work, bcm2835_timeout);
/* Set interrupt enables */
host->hcfg = SDHCFG_BUSY_IRPT_EN;
@@ -1523,7 +1523,7 @@ static int bcm2835_remove(struct platform_device *pdev)
free_irq(host->irq, host);
- del_timer_sync(&host->timer);
+ cancel_delayed_work_sync(&host->timeout_work);
mmc_free_host(host->mmc);
platform_set_drvdata(pdev, NULL);
--
Best Regards
Shawn Lin
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
