Re: [PATCH 01/13] mmc: bcm2835: add bcm2835_read_wait_sdcmd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



  Hi,

> > +	for (;;) {
> > +		value = readl(host->ioaddr + SDCMD);
> > +		if (!(value & SDCMD_NEW_FLAG))
> > +			break;
> > +		if (check_fail && (value & SDCMD_FAIL_FLAG))
> > +			break;
> > +		if (time_after(jiffies, end)) {
> > +			dev_err(dev, "%s: timeout (%d us)\n",
> > +				__func__, timeout);
> > +			break;
> > +		}
> > +
> > +		/* if it takes longer reduce poll interval */
> > +		if (time_after(jiffies, fastpoll))
> > +			udelay(10);
> > +		else
> > +			cpu_relax();
> > +	}
> 
> Use readl_poll_timeout intead of open-coding them..

Cool.  Didn't know this exists.  Incremental fixup attached.

thanks,
  Gerd

From de60d73849d83b0ddf4ee8bd6a7e175c69157a90 Mon Sep 17 00:00:00 2001
From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
Date: Fri, 27 Jan 2017 11:25:54 +0100
Subject: [PATCH] mmc: bcm2835: use readl_poll_timeout in
 bcm2835_read_wait_sdcmd

Signed-off-by: Gerd Hoffmann <kraxel@xxxxxxxxxx>
---
 drivers/mmc/host/bcm2835.c | 37 ++++++++++++++++---------------------
 1 file changed, 16 insertions(+), 21 deletions(-)

diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
index 64a2334..e8a3f6e 100644
--- a/drivers/mmc/host/bcm2835.c
+++ b/drivers/mmc/host/bcm2835.c
@@ -31,6 +31,7 @@
 #include <linux/err.h>
 #include <linux/highmem.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -609,33 +610,27 @@ static void bcm2835_prepare_data(struct bcm2835_host *host,
 	writel(data->blocks, host->ioaddr + SDHBLC);
 }
 
-static u32 bcm2835_read_wait_sdcmd(struct bcm2835_host *host, u32 timeout,
+static u32 bcm2835_read_wait_sdcmd(struct bcm2835_host *host, u32 max_ms,
 				   bool check_fail)
 {
 	struct device *dev = &host->pdev->dev;
-	unsigned long start = jiffies;
-	unsigned long fastpoll = start + usecs_to_jiffies(10);
-	unsigned long end = start + msecs_to_jiffies(timeout);
 	u32 value;
+	int ret;
 
-	for (;;) {
-		value = readl(host->ioaddr + SDCMD);
-		if (!(value & SDCMD_NEW_FLAG))
-			break;
-		if (check_fail && (value & SDCMD_FAIL_FLAG))
-			break;
-		if (time_after(jiffies, end)) {
-			dev_err(dev, "%s: timeout (%d us)\n",
-				__func__, timeout);
-			break;
-		}
+	ret = readl_poll_timeout(host->ioaddr + SDCMD, value,
+				 (!(value & SDCMD_NEW_FLAG)) ||
+				 (check_fail && (value & SDCMD_FAIL_FLAG)),
+				 1, 10);
+	if (ret == -ETIMEDOUT)
+		/* if it takes a while make poll interval bigger */
+		ret = readl_poll_timeout(host->ioaddr + SDCMD, value,
+					 (!(value & SDCMD_NEW_FLAG)) ||
+					 (check_fail && (value & SDCMD_FAIL_FLAG)),
+					 10, max_ms * 1000);
+	if (ret == -ETIMEDOUT)
+		dev_err(dev, "%s: timeout (%d ms)\n",
+			__func__, max_ms);
 
-		/* if it takes longer reduce poll interval */
-		if (time_after(jiffies, fastpoll))
-			udelay(10);
-		else
-			cpu_relax();
-	}
 	return value;
 }
 
-- 
1.8.3.1


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux