On 02/01/2017 05:57 AM, Heiner Kallweit wrote: > Currently f_min is set to 4 MHz whilst the comment states 400 MHz. > I think the itention is to set f_min to 400 kHz. > Change value and comment accordingly. > > Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> > --- > drivers/mmc/host/meson-gx-mmc.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index 5eca88bc..da3cce31 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -268,7 +268,7 @@ static int meson_mmc_clk_init(struct meson_host *host) > if (f_min != UINT_MAX) > f_min = DIV_ROUND_UP(CLK_SRC_XTAL_RATE, CLK_DIV_MAX); > else > - f_min = 4000000; /* default min: 400 MHz */ > + f_min = 400000; /* default min: 400 kHz */ I'm not sure but f_min can be 100KHz by default, not 400KHz. Because mmc-core should be try to find frequency from 400KHz to "f_min" value. Best Regards, Jaehoon Chung > host->mmc->f_min = f_min; > > /* create the mux */ > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
