Linux LEDS Development

• Date Index

• [PATCH 7/7] leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme, (continued)
  • [PATCH 7/7] leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme, Anjelique Melendez
  • Re: [PATCH 0/7] Add support for LUT PPG, Luca Weiss
    • Re: [PATCH 0/7] Add support for LUT PPG, Anjelique Melendez
• [linux-next:master] BUILD REGRESSION 47045630bc409ce6606d97b790895210dd1d517d, kernel test robot
• [net-next PATCH v5 0/3] leds: trigger: netdev: add additional modes, Christian Marangi
  • [net-next PATCH v5 1/3] leds: trigger: netdev: add additional specific link speed mode, Christian Marangi
    • Re: [net-next PATCH v5 1/3] leds: trigger: netdev: add additional specific link speed mode, Lee Jones
  • [net-next PATCH v5 3/3] leds: trigger: netdev: expose hw_control status via sysfs, Christian Marangi
    • Message not available
      • Re: [net-next PATCH v5 3/3] leds: trigger: netdev: expose hw_control status via sysfs, Andrew Lunn
    • Re: [net-next PATCH v5 3/3] leds: trigger: netdev: expose hw_control status via sysfs, Lee Jones
  • [net-next PATCH v5 2/3] leds: trigger: netdev: add additional specific link duplex mode, Christian Marangi
    • Re: [net-next PATCH v5 2/3] leds: trigger: netdev: add additional specific link duplex mode, Lee Jones
  • Re: [net-next PATCH v5 0/3] leds: trigger: netdev: add additional modes, patchwork-bot+netdevbpf
• [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes, Christian Marangi
  • [net-next PATCH v4 1/3] leds: trigger: netdev: add additional specific link speed mode, Christian Marangi
  • [net-next PATCH v4 2/3] leds: trigger: netdev: add additional specific link duplex mode, Christian Marangi
    • Re: [net-next PATCH v4 2/3] leds: trigger: netdev: add additional specific link duplex mode, Andrew Lunn
  • [net-next PATCH v4 3/3] leds: trigger: netdev: expose hw_control status via sysfs, Christian Marangi
    • Re: [net-next PATCH v4 3/3] leds: trigger: netdev: expose hw_control status via sysfs, Andrew Lunn
  • Re: [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes, Lee Jones
    • Re: [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes, Andrew Lunn
      • Re: [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes, Lee Jones
        • Re: [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes, Andrew Lunn
          • Re: [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes, Lee Jones
  • Re: [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes, Simon Horman
    • Re: [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes, Christian Marangi
• [PATCH 0/2] leds: Add a driver for KTD202x, André Apitzsch
  • [PATCH 1/2] dt-bindings: leds: Add Kinetic KTD2026/2027 LED, André Apitzsch
    • Re: [PATCH 1/2] dt-bindings: leds: Add Kinetic KTD2026/2027 LED, Krzysztof Kozlowski
      • Re: [PATCH 1/2] dt-bindings: leds: Add Kinetic KTD2026/2027 LED, André
  • [PATCH 2/2] leds: add ktd202x driver, André Apitzsch
    • Re: [PATCH 2/2] leds: add ktd202x driver, Lee Jones
      • Re: [PATCH 2/2] leds: add ktd202x driver, André
        • Re: [PATCH 2/2] leds: add ktd202x driver, Lee Jones
• [linux-next:master] BUILD REGRESSION f7efed9f38f886edb450041b82a6f15d663c98f8, kernel test robot
• [PATCH v9 0/5] Add a multicolor LED driver for groups of monochromatic LEDs, Jean-Jacques Hiblot
  • [PATCH v9 1/5] devres: provide devm_krealloc_array(), Jean-Jacques Hiblot
  • [PATCH v9 4/5] dt-bindings: leds: Add binding for a multicolor group of LEDs, Jean-Jacques Hiblot
  • [PATCH v9 5/5] leds: Add a multicolor LED driver to group monochromatic LEDs, Jean-Jacques Hiblot
    • Re: [PATCH v9 5/5] leds: Add a multicolor LED driver to group monochromatic LEDs, Lee Jones
      • Re: [PATCH v9 5/5] leds: Add a multicolor LED driver to group monochromatic LEDs, Jean-Jacques Hiblot
        • Re: [PATCH v9 5/5] leds: Add a multicolor LED driver to group monochromatic LEDs, Lee Jones
  • [PATCH v9 3/5] leds: class: store the color index in struct led_classdev, Jean-Jacques Hiblot
  • [PATCH v9 2/5] leds: provide devm_of_led_get_optional(), Jean-Jacques Hiblot
• [linux-next:master] BUILD REGRESSION 925294c9aa184801cc0a451b69a18dd0fe7d847d, kernel test robot
• [PATCH 0/3] backlight: lm3630a: add functionality to change boost converter frequency, Maximilian Weigand
  • [PATCH 1/3] backlight: lm3630a: add support for changing the boost frequency, Maximilian Weigand
    • Re: [PATCH 1/3] backlight: lm3630a: add support for changing the boost frequency, Daniel Thompson
  • [PATCH 3/3] arm64: dts: rockchip: shift boost frequency for rk3566-pinenote backlight, Maximilian Weigand
  • [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control boost frequency, Maximilian Weigand
    • Re: [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control boost frequency, Krzysztof Kozlowski
      • Re: [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control boost frequency, Heiko Stübner
        • Re: [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control boost frequency, Krzysztof Kozlowski
          • Re: [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control boost frequency, Maximilian Weigand
• [linux-next:master] BUILD REGRESSION b16049b21162bb649cdd8519642a35972b7910fe, kernel test robot
• [PATCH v2 net-next resend] leds: trigger: netdev: uninitialized variable in netdev_trig_activate(), Dan Carpenter
  • Re: [PATCH v2 net-next resend] leds: trigger: netdev: uninitialized variable in netdev_trig_activate(), Lee Jones
  • Re: [PATCH v2 net-next resend] leds: trigger: netdev: uninitialized variable in netdev_trig_activate(), patchwork-bot+netdevbpf
• [linux-next:master] BUILD REGRESSION 1f6ce8392d6ff486af5ca96df9ded5882c4b6977, kernel test robot
• [PATCH] dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks", Rob Herring
  • Re: [PATCH] dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks", Conor Dooley
  • Re: [PATCH] dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks", Lee Jones
• [PATCH v2 led] leds: trigger: netdev: uninitialized variable in netdev_trig_activate(), Dan Carpenter
  • Re: [PATCH v2 led] leds: trigger: netdev: uninitialized variable in netdev_trig_activate(), Andrew Lunn
    • Re: [PATCH v2 led] leds: trigger: netdev: uninitialized variable in netdev_trig_activate(), Dan Carpenter
• [PATCH v3 0/2] leds: trigger: netdev: add additional modes, Christian Marangi
  • [PATCH v3 2/2] leds: trigger: netdev: add additional specific link duplex mode, Christian Marangi
    • Re: [PATCH v3 2/2] leds: trigger: netdev: add additional specific link duplex mode, Andrew Lunn
  • [PATCH v3 1/2] leds: trigger: netdev: add additional specific link speed mode, Christian Marangi
• [PATCH v2 0/2] leds: trigger: netdev: add additional modes, Christian Marangi
  • [PATCH v2 1/2] leds: trigger: netdev: add additional specific link speed mode, Christian Marangi
    • Re: [PATCH v2 1/2] leds: trigger: netdev: add additional specific link speed mode, Andrew Lunn
  • [PATCH v2 2/2] leds: trigger: netdev: add additional specific link duplex mode, Christian Marangi
    • Re: [PATCH v2 2/2] leds: trigger: netdev: add additional specific link duplex mode, Andrew Lunn
      • Re: [PATCH v2 2/2] leds: trigger: netdev: add additional specific link duplex mode, Christian Marangi
• [linux-next:master] BUILD REGRESSION 53ab6975c12d1ad86c599a8927e8c698b144d669, kernel test robot
• [PATCH] dt-bindings: leds: drop unneeded quotes, Krzysztof Kozlowski
  • Re: [PATCH] dt-bindings: leds: drop unneeded quotes, Lee Jones
• [PATCH 0/3] leds: trigger: netdev: add additional modes, Christian Marangi
  • [PATCH 2/3] leds: trigger: netdev: add additional specific link duplex mode, Christian Marangi
  • [PATCH 1/3] leds: trigger: netdev: add additional specific link speed mode, Christian Marangi
    • Re: [PATCH 1/3] leds: trigger: netdev: add additional specific link speed mode, Andrew Lunn
  • [PATCH 3/3] leds: trigger: netdev: add additional mode for unified tx/rx traffic, Christian Marangi
    • Re: [PATCH 3/3] leds: trigger: netdev: add additional mode for unified tx/rx traffic, Andrew Lunn
• [PATCH] leds: fix config reference for AW200xx driver, Lukas Bulwahn
  • Re: [PATCH] leds: fix config reference for AW200xx driver, Lee Jones
• [linux-next:master] BUILD REGRESSION db10f126048021b86e43a5d6a335ec49dec10155, kernel test robot
• NPD in phy_led_set_brightness+0x3c, Florian Fainelli
  • Re: NPD in phy_led_set_brightness+0x3c, Andrew Lunn
    • Re: NPD in phy_led_set_brightness+0x3c, Florian Fainelli
      • Re: NPD in phy_led_set_brightness+0x3c, Andrew Lunn
        • Re: NPD in phy_led_set_brightness+0x3c, Florian Fainelli
          • Re: NPD in phy_led_set_brightness+0x3c, Andrew Lunn
            • Re: NPD in phy_led_set_brightness+0x3c, Florian Fainelli
• [GIT PULL] LEDs fixes for 6.4-rc5, Johan Hovold
  • Re: [GIT PULL] LEDs fixes for 6.4-rc5, pr-tracker-bot
  • Re: [GIT PULL] LEDs fixes for 6.4-rc5, Lee Jones
• [lee-leds:for-leds-next] BUILD SUCCESS WITH WARNING e338a05e76cab377c9227c1d4f591b5879d6062a, kernel test robot
• [PATCH v2] leds: trigger: pattern: add support for hrtimer, Martin Kurbanov
• [RESEND PATCH 0/2] leds: sgm3140: Add richtek,rt5033-led compatible, Raymond Hackley
  • [RESEND PATCH 2/2] leds: sgm3140: Add richtek,rt5033-led compatible, Raymond Hackley
  • [RESEND PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible, Raymond Hackley
    • Re: [RESEND PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible, Krzysztof Kozlowski
      • Re: [RESEND PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible, Raymond Hackley
    • Re: [RESEND PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible, Lee Jones
  • Re: [RESEND PATCH 0/2] leds: sgm3140: Add richtek,rt5033-led compatible, Luca Weiss
• [PATCH 2/2] leds: sgm3140: Add richtek,rt5033-led compatible, Raymond Hackley
  • Re: [PATCH 2/2] leds: sgm3140: Add richtek,rt5033-led compatible, Lee Jones
• [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible, Raymond Hackley
  • Re: [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible, Lee Jones
    • Re: [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible, Lee Jones
      • Re: [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible, Conor Dooley
        • Re: [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible, Lee Jones
          • Re: [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible, Conor Dooley
    • Re: [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible, Raymond Hackley
    • Re: [RESEND PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible, Raymond Hackley
  • Re: [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible, Lee Jones
• [PATCH] leds: cht-wcove: mark cht_wc_leds_brightness_get static, Arnd Bergmann
  • Re: [PATCH] leds: cht-wcove: mark cht_wc_leds_brightness_get static, Hans de Goede
• [PATCH v3 0/8] Add support for MT6331 and MT6332 LEDs, AngeloGioacchino Del Regno
  • [PATCH v3 1/8] dt-bindings: leds: leds-mt6323: Document mt6331 compatible, AngeloGioacchino Del Regno
    • Re: [PATCH v3 1/8] dt-bindings: leds: leds-mt6323: Document mt6331 compatible, Lee Jones
  • [PATCH v3 2/8] dt-bindings: leds: leds-mt6323: Document mt6332 compatible, AngeloGioacchino Del Regno
    • Re: [PATCH v3 2/8] dt-bindings: leds: leds-mt6323: Document mt6332 compatible, Lee Jones
  • [PATCH v3 3/8] dt-bindings: leds: leds-mt6323: Support WLED output, AngeloGioacchino Del Regno
    • Re: [PATCH v3 3/8] dt-bindings: leds: leds-mt6323: Support WLED output, Krzysztof Kozlowski
      • Re: [PATCH v3 3/8] dt-bindings: leds: leds-mt6323: Support WLED output, Lee Jones
      • Re: [PATCH v3 3/8] dt-bindings: leds: leds-mt6323: Support WLED output, AngeloGioacchino Del Regno
        • Re: [PATCH v3 3/8] dt-bindings: leds: leds-mt6323: Support WLED output, Krzysztof Kozlowski
          • Re: [PATCH v3 3/8] dt-bindings: leds: leds-mt6323: Support WLED output, AngeloGioacchino Del Regno
  • [PATCH v3 4/8] leds: leds-mt6323: Specify registers and specs in platform data, AngeloGioacchino Del Regno
    • Re: [PATCH v3 4/8] leds: leds-mt6323: Specify registers and specs in platform data, Lee Jones
  • [PATCH v3 5/8] leds: leds-mt6323: Drop MT6323_ prefix from macros and defines, AngeloGioacchino Del Regno
    • Re: [PATCH v3 5/8] leds: leds-mt6323: Drop MT6323_ prefix from macros and defines, Lee Jones
  • [PATCH v3 6/8] leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro, AngeloGioacchino Del Regno
    • Re: [PATCH v3 6/8] leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro, Lee Jones
  • [PATCH v3 7/8] leds: leds-mt6323: Add support for MT6331 leds, AngeloGioacchino Del Regno
    • Re: [PATCH v3 7/8] leds: leds-mt6323: Add support for MT6331 leds, Lee Jones
  • [PATCH v3 8/8] leds: leds-mt6323: Add support for WLEDs and MT6332, AngeloGioacchino Del Regno
    • Re: [PATCH v3 8/8] leds: leds-mt6323: Add support for WLEDs and MT6332, Lee Jones
    • Re: [PATCH v3 8/8] leds: leds-mt6323: Add support for WLEDs and MT6332, Nathan Chancellor
      • Re: [PATCH v3 8/8] leds: leds-mt6323: Add support for WLEDs and MT6332, AngeloGioacchino Del Regno
• [PATCH 0/1] leds: simatic-ipc-leds-gpio: add new model BX-21A, Henning Schild
  • [PATCH 1/1] leds: simatic-ipc-leds-gpio: add new model BX-21A, Henning Schild
    • Re: [PATCH 1/1] leds: simatic-ipc-leds-gpio: add new model BX-21A, Hans de Goede
      • Re: [PATCH 1/1] leds: simatic-ipc-leds-gpio: add new model BX-21A, Henning Schild
        • Re: [PATCH 1/1] leds: simatic-ipc-leds-gpio: add new model BX-21A, Lee Jones
    • Re: [PATCH 1/1] leds: simatic-ipc-leds-gpio: add new model BX-21A, Andy Shevchenko
  • Re: [PATCH 0/1] leds: simatic-ipc-leds-gpio: add new model BX-21A, Henning Schild
• [PATCH] leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative, Jiapeng Chong
  • Re: [PATCH] leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative, Lee Jones
• [PATCH] leds: cht-wcove: remove unneeded semicolon, Jiapeng Chong
  • Re: [PATCH] leds: cht-wcove: remove unneeded semicolon, Lee Jones
  • <Possible follow-ups>
  • [PATCH] leds: cht-wcove: Remove unneeded semicolon, baomingtong001
    • Re: [PATCH] leds: cht-wcove: Remove unneeded semicolon, Lee Jones
• [PATCH -next] leds: cht-wcove: Fix an unsigned comparison which can never be negative, Yang Li
  • Re: [PATCH -next] leds: cht-wcove: Fix an unsigned comparison which can never be negative, Lee Jones
• [PATCH] leds: cht-wcove: set function cht_wc_leds_brightness_get storage-class-specifier to static, Tom Rix
  • Re: [PATCH] leds: cht-wcove: set function cht_wc_leds_brightness_get storage-class-specifier to static, Lee Jones
• [lee-leds:for-leds-next] BUILD SUCCESS WITH WARNING 8f38f8fa7261819eb7d4fb369dc3bfab72259033, kernel test robot
• [lee-leds:ib-leds-netdev-6.5] BUILD SUCCESS d1b9e1391ab2dc80e9db87fe8b2de015c651e4c9, kernel test robot
• [net-next PATCH v4 00/13] leds: introduce new LED hw control APIs, Christian Marangi
  • [net-next PATCH v4 01/13] leds: add APIs for LEDs hw control, Christian Marangi
  • [net-next PATCH v4 02/13] leds: add API to get attached device for LED hw control, Christian Marangi
  • [net-next PATCH v4 03/13] Documentation: leds: leds-class: Document new Hardware driven LEDs APIs, Christian Marangi
    • Re: [net-next PATCH v4 03/13] Documentation: leds: leds-class: Document new Hardware driven LEDs APIs, Andrew Lunn
  • [net-next PATCH v4 05/13] leds: trigger: netdev: introduce check for possible hw control, Christian Marangi
  • [net-next PATCH v4 12/13] net: dsa: qca8k: implement hw_control ops, Christian Marangi
  • [net-next PATCH v4 10/13] leds: trigger: netdev: init mode if hw control already active, Christian Marangi
  • [net-next PATCH v4 13/13] net: dsa: qca8k: add op to get ports netdev, Christian Marangi
  • [net-next PATCH v4 08/13] leds: trigger: netdev: add support for LED hw control, Christian Marangi
  • [net-next PATCH v4 06/13] leds: trigger: netdev: add basic check for hw control support, Christian Marangi
  • [net-next PATCH v4 09/13] leds: trigger: netdev: validate configured netdev, Christian Marangi
  • [net-next PATCH v4 07/13] leds: trigger: netdev: reject interval store for hw_control, Christian Marangi
  • [net-next PATCH v4 04/13] leds: trigger: netdev: refactor code setting device name, Christian Marangi
  • [net-next PATCH v4 11/13] leds: trigger: netdev: expose netdev trigger modes in linux include, Christian Marangi
  • Re: [net-next PATCH v4 00/13] leds: introduce new LED hw control APIs, Jakub Kicinski
    • Re: [net-next PATCH v4 00/13] leds: introduce new LED hw control APIs, Andrew Lunn
  • Re: [net-next PATCH v4 00/13] leds: introduce new LED hw control APIs, patchwork-bot+netdevbpf
    • Re: [net-next PATCH v4 00/13] leds: introduce new LED hw control APIs, Lee Jones
• [net-next PATCH v3 00/13] leds: introduce new LED hw control APIs, Christian Marangi
  • [net-next PATCH v3 01/13] leds: add APIs for LEDs hw control, Christian Marangi
    • Re: [net-next PATCH v3 01/13] leds: add APIs for LEDs hw control, Andrew Lunn
  • [net-next PATCH v3 02/13] leds: add API to get attached device for LED hw control, Christian Marangi
  • [net-next PATCH v3 03/13] Documentation: leds: leds-class: Document new Hardware driven LEDs APIs, Christian Marangi
    • Re: [net-next PATCH v3 03/13] Documentation: leds: leds-class: Document new Hardware driven LEDs APIs, Bagas Sanjaya
      • Re: [net-next PATCH v3 03/13] Documentation: leds: leds-class: Document new Hardware driven LEDs APIs, Jonathan Corbet
        • Re: [net-next PATCH v3 03/13] Documentation: leds: leds-class: Document new Hardware driven LEDs APIs, Christian Marangi
          • Re: [net-next PATCH v3 03/13] Documentation: leds: leds-class: Document new Hardware driven LEDs APIs, Bagas Sanjaya
            • Re: [net-next PATCH v3 03/13] Documentation: leds: leds-class: Document new Hardware driven LEDs APIs, Andrew Lunn
      • Re: [net-next PATCH v3 03/13] Documentation: leds: leds-class: Document new Hardware driven LEDs APIs, Andrew Lunn
  • [net-next PATCH v3 07/13] leds: trigger: netdev: reject interval store for hw_control, Christian Marangi
    • Re: [net-next PATCH v3 07/13] leds: trigger: netdev: reject interval store for hw_control, Andrew Lunn
  • [net-next PATCH v3 04/13] leds: trigger: netdev: refactor code setting device name, Christian Marangi
  • [net-next PATCH v3 05/13] leds: trigger: netdev: introduce check for possible hw control, Christian Marangi
    • Re: [net-next PATCH v3 05/13] leds: trigger: netdev: introduce check for possible hw control, Andrew Lunn
  • [net-next PATCH v3 06/13] leds: trigger: netdev: add basic check for hw control support, Christian Marangi
    • Re: [net-next PATCH v3 06/13] leds: trigger: netdev: add basic check for hw control support, Andrew Lunn
  • [net-next PATCH v3 09/13] leds: trigger: netdev: validate configured netdev, Christian Marangi
  • [net-next PATCH v3 08/13] leds: trigger: netdev: add support for LED hw control, Christian Marangi
    • Re: [net-next PATCH v3 08/13] leds: trigger: netdev: add support for LED hw control, Andrew Lunn
      • Re: [net-next PATCH v3 08/13] leds: trigger: netdev: add support for LED hw control, Christian Marangi
  • [net-next PATCH v3 11/13] leds: trigger: netdev: expose netdev trigger modes in linux include, Christian Marangi
    • Re: [net-next PATCH v3 11/13] leds: trigger: netdev: expose netdev trigger modes in linux include, Andrew Lunn
  • [net-next PATCH v3 10/13] leds: trigger: netdev: init mode if hw control already active, Christian Marangi
  • [net-next PATCH v3 12/13] net: dsa: qca8k: implement hw_control ops, Christian Marangi
    • Re: [net-next PATCH v3 12/13] net: dsa: qca8k: implement hw_control ops, Andrew Lunn
  • [net-next PATCH v3 13/13] net: dsa: qca8k: add op to get ports netdev, Christian Marangi
• [PATCH] leds: cht-wcove: Mark cht_wc_leds_brightness_get() static, Hans de Goede
  • Re: [PATCH] leds: cht-wcove: Mark cht_wc_leds_brightness_get() static, Lee Jones
• [net-next PATCH v2 00/13] leds: introduce new LED hw control APIs, Christian Marangi
  • [net-next PATCH v2 03/13] Documentation: leds: leds-class: Document new Hardware driven LEDs APIs, Christian Marangi
  • [net-next PATCH v2 06/13] leds: trigger: netdev: add basic check for hw control support, Christian Marangi
  • [net-next PATCH v2 05/13] leds: trigger: netdev: introduce check for possible hw control, Christian Marangi
  • [net-next PATCH v2 04/13] leds: trigger: netdev: refactor code setting device name, Christian Marangi
  • [net-next PATCH v2 07/13] leds: trigger: netdev: reject interval store for hw_control, Christian Marangi
  • [net-next PATCH v2 09/13] leds: trigger: netdev: validate configured netdev, Christian Marangi
  • [net-next PATCH v2 13/13] net: dsa: qca8k: add op to get ports netdev, Christian Marangi
  • [net-next PATCH v2 01/13] leds: add APIs for LEDs hw control, Christian Marangi
  • [net-next PATCH v2 10/13] leds: trigger: netdev: init mode if hw control already active, Christian Marangi
  • [net-next PATCH v2 02/13] leds: add API to get attached device for LED hw control, Christian Marangi
  • [net-next PATCH v2 12/13] net: dsa: qca8k: implement hw_control ops, Christian Marangi
  • [net-next PATCH v2 08/13] leds: trigger: netdev: add support for LED hw control, Christian Marangi
  • [net-next PATCH v2 11/13] leds: trigger: netdev: expose netdev trigger modes in linux include, Christian Marangi
  • Re: [net-next PATCH v2 00/13] leds: introduce new LED hw control APIs, Jakub Kicinski
    • Re: [net-next PATCH v2 00/13] leds: introduce new LED hw control APIs, Christian Marangi
• [PATCH v2] dt-bindings: leds: qcom-lpg: document PM8550 compatible, Neil Armstrong
  • Re: [PATCH v2] dt-bindings: leds: qcom-lpg: document PM8550 compatible, Lee Jones
• [PATCH] led: qcom-lpg: Fix resource leaks in for_each_available_child_of_node() loops, Lu Hongfei
  • Re: [PATCH] led: qcom-lpg: Fix resource leaks in for_each_available_child_of_node() loops, Lee Jones
• [PATCH v2 0/2] leds: add Awinic AW2026 driver, Vladimir Barinov
  • [PATCH v2 1/2] leds: add Awinic AW2026 LED driver, Vladimir Barinov
    • Re: [PATCH v2 1/2] leds: add Awinic AW2026 LED driver, Lee Jones
  • [PATCH v2 2/2] dt-bindings: leds: Document Awinic AW2026 bindings, Vladimir Barinov
    • Re: [PATCH v2 2/2] dt-bindings: leds: Document Awinic AW2026 bindings, Krzysztof Kozlowski
• [PATCH v2] leds: as3645a: Replace strlcpy with strscpy, Azeem Shaikh
  • Re: [PATCH v2] leds: as3645a: Replace strlcpy with strscpy, Lee Jones
• [PATCH v4 0/4] leds: simatic-ipc-leds-gpio: split up, Henning Schild
  • [PATCH v4 1/4] leds: simatic-ipc-leds-gpio: add terminating entries to gpio tables, Henning Schild
    • Re: [PATCH v4 1/4] leds: simatic-ipc-leds-gpio: add terminating entries to gpio tables, Andy Shevchenko
      • Re: [PATCH v4 1/4] leds: simatic-ipc-leds-gpio: add terminating entries to gpio tables, Henning Schild
        • Re: [PATCH v4 1/4] leds: simatic-ipc-leds-gpio: add terminating entries to gpio tables, Andy Shevchenko
          • Re: [PATCH v4 1/4] leds: simatic-ipc-leds-gpio: add terminating entries to gpio tables, Lee Jones
            • Re: [PATCH v4 1/4] leds: simatic-ipc-leds-gpio: add terminating entries to gpio tables, Andy Shevchenko
              • Re: [PATCH v4 1/4] leds: simatic-ipc-leds-gpio: add terminating entries to gpio tables, Lee Jones
                • Re: [PATCH v4 1/4] leds: simatic-ipc-leds-gpio: add terminating entries to gpio tables, Lee Jones
    • Re: [PATCH v4 1/4] leds: simatic-ipc-leds-gpio: add terminating entries to gpio tables, Lee Jones
  • [PATCH v4 2/4] leds: simatic-ipc-leds-gpio: move two extra gpio pins into another table, Henning Schild
    • Re: [PATCH v4 2/4] leds: simatic-ipc-leds-gpio: move two extra gpio pins into another table, Lee Jones
  • [PATCH v4 3/4] leds: simatic-ipc-leds-gpio: split up into multiple drivers, Henning Schild
    • Re: [PATCH v4 3/4] leds: simatic-ipc-leds-gpio: split up into multiple drivers, Lee Jones
  • [PATCH v4 4/4] leds: simatic-ipc-leds-gpio: introduce more Kconfig switches, Henning Schild
    • Re: [PATCH v4 4/4] leds: simatic-ipc-leds-gpio: introduce more Kconfig switches, Lee Jones
  • Re: [PATCH v4 0/4] leds: simatic-ipc-leds-gpio: split up, Hans de Goede
  • Re: [PATCH v4 0/4] leds: simatic-ipc-leds-gpio: split up, Andy Shevchenko
• [PATCH 0/2] leds: add Awinic AW2016 driver, Vladimir Barinov
  • [PATCH 1/2] leds: add Awinic AW2016 LED driver, Vladimir Barinov
  • [PATCH 2/2] dt-bindings: leds: Document Awinic AW2016 bindings, Vladimir Barinov
    • Re: [PATCH 2/2] dt-bindings: leds: Document Awinic AW2016 bindings, Rob Herring
      • Re: [PATCH 2/2] dt-bindings: leds: Document Awinic AW2016 bindings, Lee Jones
        • Re: [PATCH 2/2] dt-bindings: leds: Document Awinic AW2016 bindings, Vladimir Barinov
• [PATCH v3 0/3] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3, Luca Weiss
  • [PATCH v3 3/3] Documentation: leds: Add "rgb:status" path, Luca Weiss
    • Re: [PATCH v3 3/3] Documentation: leds: Add "rgb:status" path, Lee Jones
  • [PATCH v3 2/3] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Luca Weiss
  • [PATCH v3 1/3] arm64: dts: qcom: Add PMI632 PMIC, Luca Weiss
  • Re: (subset) [PATCH v3 0/3] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3, Bjorn Andersson
• [PATCH v2] leds: gpio: Configure per-LED pin control, Marek Vasut
  • Re: [PATCH v2] leds: gpio: Configure per-LED pin control, Lee Jones
• [PATCH] dt-bindings: backlight: pwm: Make power-supply not required, Geert Uytterhoeven
  • Re: [PATCH] dt-bindings: backlight: pwm: Make power-supply not required, Conor Dooley
  • Re: [PATCH] dt-bindings: backlight: pwm: Make power-supply not required, Lee Jones
• [PATCH] leds: Replace all non-returning strlcpy with strscpy, Azeem Shaikh
  • Re: [PATCH] leds: Replace all non-returning strlcpy with strscpy, Kees Cook
  • Re: [PATCH] leds: Replace all non-returning strlcpy with strscpy, Lee Jones
• [PATCH] leds: blinkm: Replace all non-returning strlcpy with strscpy, Azeem Shaikh
  • Re: [PATCH] leds: blinkm: Replace all non-returning strlcpy with strscpy, Kees Cook
  • Re: [PATCH] leds: blinkm: Replace all non-returning strlcpy with strscpy, Lee Jones
• [PATCH] i2c: Replace all non-returning strlcpy with strscpy, Azeem Shaikh
  • Re: [PATCH] i2c: Replace all non-returning strlcpy with strscpy, Lee Jones
    • Re: [PATCH] i2c: Replace all non-returning strlcpy with strscpy, Sakari Ailus
      • Re: [PATCH] i2c: Replace all non-returning strlcpy with strscpy, Azeem Shaikh
        • Re: [PATCH] i2c: Replace all non-returning strlcpy with strscpy, Sakari Ailus
  • Re: [PATCH] i2c: Replace all non-returning strlcpy with strscpy, Kees Cook
• [PATCH v1] leds: trigger: pattern: add support for hrtimer, Martin Kurbanov
  • Re: [PATCH v1] leds: trigger: pattern: add support for hrtimer, kernel test robot
    • Re: [PATCH v1] leds: trigger: pattern: add support for hrtimer, Lee Jones
      • Re: [PATCH v1] leds: trigger: pattern: add support for hrtimer, Martin Kurbanov
• [PATCH] dt-bindings: leds: qcom-lpg: document PM8550 compatible, Neil Armstrong
  • Re: [PATCH] dt-bindings: leds: qcom-lpg: document PM8550 compatible, Conor Dooley
    • Re: [PATCH] dt-bindings: leds: qcom-lpg: document PM8550 compatible, Neil Armstrong
  • Re: [PATCH] dt-bindings: leds: qcom-lpg: document PM8550 compatible, Lee Jones
• [PATCH v5 17/44] leds: add HAS_IOPORT dependencies, Niklas Schnelle
  • Re: [PATCH v5 17/44] leds: add HAS_IOPORT dependencies, Lee Jones
• [PATCH v3] Add multicolor support to BlinkM LED driver, Joseph Strauss
  • Re: [PATCH v3] Add multicolor support to BlinkM LED driver, Lee Jones
• [PATCH 1/2] backlight: gpio_backlight: add new property default-brightness-level, Alexandru Ardelean
  • [PATCH 2/2] dt-bindings: backlight: document new property default-brightness-level, Alexandru Ardelean
    • Re: [PATCH 2/2] dt-bindings: backlight: document new property default-brightness-level, Daniel Thompson
      • Re: [PATCH 2/2] dt-bindings: backlight: document new property default-brightness-level, Alexandru Ardelean
    • Re: [PATCH 2/2] dt-bindings: backlight: document new property default-brightness-level, Philippe CORNU
      • Re: [PATCH 2/2] dt-bindings: backlight: document new property default-brightness-level, Alexandru Ardelean
  • Re: [PATCH 1/2] backlight: gpio_backlight: add new property default-brightness-level, Daniel Thompson
  • Re: [PATCH 1/2] backlight: gpio_backlight: add new property default-brightness-level, Philippe CORNU
    • Re: [PATCH 1/2] backlight: gpio_backlight: add new property default-brightness-level, Alexandru Ardelean
• [PATCH v2 0/4] video: backlight: lp855x: modernize bindings, Artur Weber
  • [PATCH v2 3/4] ARM: dts: adapt to LP855X bindings changes, Artur Weber
    • Re: [PATCH v2 3/4] ARM: dts: adapt to LP855X bindings changes, Daniel Thompson
  • [PATCH v2 2/4] video: backlight: lp855x: get PWM for PWM mode during probe, Artur Weber
    • Re: [PATCH v2 2/4] video: backlight: lp855x: get PWM for PWM mode during probe, Daniel Thompson
    • Re: [PATCH v2 2/4] video: backlight: lp855x: get PWM for PWM mode during probe, Lee Jones
  • [PATCH v2 4/4] arm64: dts: adapt to LP855X bindings changes, Artur Weber
    • Re: [PATCH v2 4/4] arm64: dts: adapt to LP855X bindings changes, Daniel Thompson
  • [PATCH v2 1/4] dt-bindings: backlight: lp855x: convert to YAML and modernize, Artur Weber
    • Re: [PATCH v2 1/4] dt-bindings: backlight: lp855x: convert to YAML and modernize, Daniel Thompson
    • Re: [PATCH v2 1/4] dt-bindings: backlight: lp855x: convert to YAML and modernize, Lee Jones
  • Re: (subset) [PATCH v2 0/4] video: backlight: lp855x: modernize bindings, Bjorn Andersson
    • Re: (subset) [PATCH v2 0/4] video: backlight: lp855x: modernize bindings, Bjorn Andersson
  • Re: (subset) [PATCH v2 0/4] video: backlight: lp855x: modernize bindings, Thierry Reding
• Stable branch for LEDs, Andrew Lunn
  • [GIT PULL] Immutable branch between LEDs and netdev due for the v6.5 merge window, Lee Jones
    • Re: [GIT PULL] Immutable branch between LEDs and netdev due for the v6.5 merge window, patchwork-bot+netdevbpf
• [PATCH v5 0/2] leds: add aw20xx driver, Martin Kurbanov
  • [PATCH v5 1/2] dt-bindings: leds: add binding for aw200xx, Martin Kurbanov
    • Re: [PATCH v5 1/2] dt-bindings: leds: add binding for aw200xx, Lee Jones
  • [PATCH v5 2/2] leds: add aw20xx driver, Martin Kurbanov
    • Re: [PATCH v5 2/2] leds: add aw20xx driver, Lee Jones
• [PATCH v3 0/3] arm64: dts: qcom: pmi8998: add and enable flash LED controller, Dylan Van Assche
  • [PATCH v3 1/3] dt-bindings: leds: qcom,spmi-flash-led: add PMI8998, Dylan Van Assche
    • Re: [PATCH v3 1/3] dt-bindings: leds: qcom,spmi-flash-led: add PMI8998, Lee Jones
  • [PATCH v3 2/3] arm64: dts: qcom: pmi8998: add flash LED controller, Dylan Van Assche
  • [PATCH v3 3/3] arm64: dts: qcom: sdm845-shift-axolotl: enable flash LEDs, Dylan Van Assche
    • Re: [PATCH v3 3/3] arm64: dts: qcom: sdm845-shift-axolotl: enable flash LEDs, Caleb Connolly
  • Re: (subset) [PATCH v3 0/3] arm64: dts: qcom: pmi8998: add and enable flash LED controller, Bjorn Andersson
• [PATCH v4 0/2] leds: add aw20xx driver, Martin Kurbanov
  • [PATCH v4 1/2] dt-bindings: leds: add binding for aw200xx, Martin Kurbanov
  • [PATCH v4 2/2] leds: add aw20xx driver, Martin Kurbanov
    • Re: [PATCH v4 2/2] leds: add aw20xx driver, Andy Shevchenko
      • Re: [PATCH v4 2/2] leds: add aw20xx driver, Lee Jones
        • Re: [PATCH v4 2/2] leds: add aw20xx driver, Andy Shevchenko
          • Re: [PATCH v4 2/2] leds: add aw20xx driver, Lee Jones
            • Re: [PATCH v4 2/2] leds: add aw20xx driver, Andy Shevchenko
              • Re: [PATCH v4 2/2] leds: add aw20xx driver, Lee Jones
• [PATCH] leds: Switch i2c drivers back to use .probe(), Uwe Kleine-König
  • Re: [PATCH] leds: Switch i2c drivers back to use .probe(), Lee Jones
• [PATCH 1/3] dt-bindings: leds: qcom,spmi-flash-led: add PM8550, Krzysztof Kozlowski
  • [PATCH 2/3] arm64: dts: qcom: pm8550: add flash LED controller, Krzysztof Kozlowski
    • Re: [PATCH 2/3] arm64: dts: qcom: pm8550: add flash LED controller, Konrad Dybcio
  • [PATCH 3/3] arm64: dts: qcom: sm8550-qrd: add flash LEDs, Krzysztof Kozlowski
    • Re: [PATCH 3/3] arm64: dts: qcom: sm8550-qrd: add flash LEDs, Konrad Dybcio
  • Re: [PATCH 1/3] dt-bindings: leds: qcom,spmi-flash-led: add PM8550, Conor Dooley
  • Re: [PATCH 1/3] dt-bindings: leds: qcom,spmi-flash-led: add PM8550, Konrad Dybcio
    • Re: [PATCH 1/3] dt-bindings: leds: qcom,spmi-flash-led: add PM8550, Lee Jones
  • Re: (subset) [PATCH 1/3] dt-bindings: leds: qcom,spmi-flash-led: add PM8550, Bjorn Andersson
  • Re: [PATCH 1/3] dt-bindings: leds: qcom,spmi-flash-led: add PM8550, Lee Jones
• [PATCH v4 15/41] leds: add HAS_IOPORT dependencies, Niklas Schnelle
• [lee-leds:for-leds-next] BUILD SUCCESS 7a9496d0feb5fefdc9a556ce189f8a7326e40625, kernel test robot
• [PATCH v2] leds: qcom-lpg: Fix PWM period limits, Bjorn Andersson
  • Re: [PATCH v2] leds: qcom-lpg: Fix PWM period limits, Johan Hovold
    • Re: [PATCH v2] leds: qcom-lpg: Fix PWM period limits, Lee Jones
      • Re: [PATCH v2] leds: qcom-lpg: Fix PWM period limits, Johan Hovold
        • Re: [PATCH v2] leds: qcom-lpg: Fix PWM period limits, Lee Jones
  • Re: [PATCH v2] leds: qcom-lpg: Fix PWM period limits, Neil Armstrong
• [PATCH v3 0/3] leds: simatic-ipc-leds-gpio: split up, Henning Schild
  • [PATCH v3 1/3] leds: simatic-ipc-leds-gpio: move two extra gpio pins into another table, Henning Schild
    • Re: [PATCH v3 1/3] leds: simatic-ipc-leds-gpio: move two extra gpio pins into another table, Andy Shevchenko
  • [PATCH v3 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers, Henning Schild
    • Re: [PATCH v3 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers, Andy Shevchenko
      • Re: [PATCH v3 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers, Henning Schild
  • [PATCH v3 3/3] leds: simatic-ipc-leds-gpio: introduce more Kconfig switches, Henning Schild
• [PATCH] led: qcom-lpg: Fix bugs in lpg_add_led & lpg_probe, luhongfei
  • Re: [PATCH] led: qcom-lpg: Fix bugs in lpg_add_led & lpg_probe, Lee Jones
• [PATCH] leds: qcom-lpg: Fix PWM period limits, Bjorn Andersson
  • Re: [PATCH] leds: qcom-lpg: Fix PWM period limits, Steev Klimaszewski
  • Re: [PATCH] leds: qcom-lpg: Fix PWM period limits, Caleb Connolly
    • Re: [PATCH] leds: qcom-lpg: Fix PWM period limits, Bjorn Andersson
      • Re: [PATCH] leds: qcom-lpg: Fix PWM period limits, Caleb Connolly
• [PATCH V4 0/3] Add support control UP board CPLD/FPGA pin control, larry.lai
  • [PATCH V4 1/3] mfd: Add support for UP board CPLD/FPGA, larry.lai
    • Re: [PATCH V4 1/3] mfd: Add support for UP board CPLD/FPGA, Lee Jones
  • [PATCH V4 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA, larry.lai
    • Re: [PATCH V4 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA, kernel test robot
  • [PATCH V4 3/3] leds: Add support for UP board CPLD onboard LEDS, larry.lai
• [PATCH -next] leds: trigger: netdev: NULL check before dev_{put, hold}, Yang Li
  • Re: [PATCH -next] leds: trigger: netdev: NULL check before dev_{put, hold}, Lee Jones
• [PATCH RESEND 0/4] Fix oops about sleeping in led_trigger_blink(), Hans de Goede
  • [PATCH RESEND 2/4] leds: Fix set_brightness_delayed() race, Hans de Goede
    • Re: [PATCH RESEND 2/4] leds: Fix set_brightness_delayed() race, Lee Jones
  • [PATCH RESEND 4/4] leds: Clear LED_INIT_DEFAULT_TRIGGER when clearing current trigger, Hans de Goede
    • Re: [PATCH RESEND 4/4] leds: Clear LED_INIT_DEFAULT_TRIGGER when clearing current trigger, Lee Jones
  • [PATCH RESEND 1/4] leds: Change led_trigger_blink[_oneshot]() delay parameters to pass-by-value, Hans de Goede
    • Re: [PATCH RESEND 1/4] leds: Change led_trigger_blink[_oneshot]() delay parameters to pass-by-value, Sebastian Reichel
    • Re: [PATCH RESEND 1/4] leds: Change led_trigger_blink[_oneshot]() delay parameters to pass-by-value, Florian Westphal
    • Re: [PATCH RESEND 1/4] leds: Change led_trigger_blink[_oneshot]() delay parameters to pass-by-value, Greg Kroah-Hartman
    • Re: [PATCH RESEND 1/4] leds: Change led_trigger_blink[_oneshot]() delay parameters to pass-by-value, Lee Jones
  • [PATCH RESEND 3/4] leds: Fix oops about sleeping in led_trigger_blink(), Hans de Goede
    • Re: [PATCH RESEND 3/4] leds: Fix oops about sleeping in led_trigger_blink(), Lee Jones
• [PATCH] leds: Make LEDS_TI_LMU_COMMON invisible, Geert Uytterhoeven
  • Re: [PATCH] leds: Make LEDS_TI_LMU_COMMON invisible, Pavel Machek
  • Re: [PATCH] leds: Make LEDS_TI_LMU_COMMON invisible, Lee Jones
• [PATCH 0/2] leds: flash: leds-qcom-flash: add PMI8998 support, Dylan Van Assche
  • [PATCH 1/2] leds: flash: leds-qcom-flash: add PMI8998 support, Dylan Van Assche
    • Re: [PATCH 1/2] leds: flash: leds-qcom-flash: add PMI8998 support, Lee Jones
  • [PATCH 2/2] leds: flash: leds-qcom-flash: disable LED when changing brightness, Dylan Van Assche
    • Re: [PATCH 2/2] leds: flash: leds-qcom-flash: disable LED when changing brightness, Lee Jones
• Re: [GIT PULL] LEDs for v6.4, Pavel Machek
  • Re: [GIT PULL] LEDs for v6.4, Lee Jones
• [PATCH v3 0/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Hans de Goede
  • [PATCH v3 3/5] leds: cht-wcove: Add support for breathing mode use hw_pattern sysfs API, Hans de Goede
    • Re: [PATCH v3 3/5] leds: cht-wcove: Add support for breathing mode use hw_pattern sysfs API, Lee Jones
  • [PATCH v3 2/5] leds: cht-wcove: Add suspend/resume handling, Hans de Goede
    • Re: [PATCH v3 2/5] leds: cht-wcove: Add suspend/resume handling, Lee Jones
  • [PATCH v3 4/5] leds: cht-wcove: Set default trigger for charging LED, Hans de Goede
    • Re: [PATCH v3 4/5] leds: cht-wcove: Set default trigger for charging LED, Lee Jones
  • [PATCH v3 1/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Hans de Goede
    • Re: [PATCH v3 1/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Lee Jones
  • [PATCH v3 5/5] leds: cht-wcove: Use breathing when LED_INIT_DEFAULT_TRIGGER is set, Hans de Goede
    • Re: [PATCH v3 5/5] leds: cht-wcove: Use breathing when LED_INIT_DEFAULT_TRIGGER is set, Lee Jones
  • Re: [PATCH v3 0/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Yauhen Kharuzhy
    • Re: [PATCH v3 0/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Hans de Goede
      • Re: [PATCH v3 0/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Yauhen Kharuzhy
• [PATCH 0/4] video: backlight: lp855x: modernize bindings, Artur Weber
  • [PATCH 1/4] dt-bindings: backlight: lp855x: convert to YAML and modernize, Artur Weber
    • Re: [PATCH 1/4] dt-bindings: backlight: lp855x: convert to YAML and modernize, Rob Herring
  • [PATCH 2/4] video: backlight: lp855x: get PWM for PWM mode during probe, Artur Weber
    • Re: [PATCH 2/4] video: backlight: lp855x: get PWM for PWM mode during probe, Uwe Kleine-König
      • Re: [PATCH 2/4] video: backlight: lp855x: get PWM for PWM mode during probe, Artur Weber
        • Re: [PATCH 2/4] video: backlight: lp855x: get PWM for PWM mode during probe, Uwe Kleine-König
  • [PATCH 3/4] ARM: dts: adapt to LP855X bindings changes, Artur Weber
    • Re: [PATCH 3/4] ARM: dts: adapt to LP855X bindings changes, Luca Weiss
  • [PATCH 4/4] arm64: dts: adapt to LP855X bindings changes, Artur Weber
• [PATCH] dt-bindings: leds: backlight: ktz8866: Add reg property and update example, Jianhua Lu
  • Re: [PATCH] dt-bindings: leds: backlight: ktz8866: Add reg property and update example, Krzysztof Kozlowski
  • Re: [PATCH] dt-bindings: leds: backlight: ktz8866: Add reg property and update example, Daniel Thompson
  • Re: [PATCH] dt-bindings: leds: backlight: ktz8866: Add reg property and update example, Lee Jones
• [lee-leds:for-leds-next] BUILD SUCCESS 8325642d2757eba80210dec727bb0bcffb837ff1, kernel test robot
• [PATCH 00/11] leds: introduce new LED hw control APIs, Christian Marangi
  • [PATCH 01/11] leds: add binding for LEDs hw control, Christian Marangi
  • [PATCH 03/11] leds: add helper function to use trigger in hw blink mode, Christian Marangi
  • [PATCH 05/11] leds: trigger: netdev: introduce validating requested mode, Christian Marangi
    • Re: [PATCH 05/11] leds: trigger: netdev: introduce validating requested mode, Andrew Lunn
  • [PATCH 04/11] Documentation: leds: leds-class: Document new Hardware driven LEDs APIs, Christian Marangi
    • Re: [PATCH 04/11] Documentation: leds: leds-class: Document new Hardware driven LEDs APIs, Bagas Sanjaya
  • [PATCH 02/11] leds: add binding to check support for LED hw control, Christian Marangi
    • Re: [PATCH 02/11] leds: add binding to check support for LED hw control, Andrew Lunn
  • [PATCH 07/11] leds: trigger: netdev: reject interval and device store for hw_control, Christian Marangi
    • Re: [PATCH 07/11] leds: trigger: netdev: reject interval and device store for hw_control, Sascha Hauer
  • [PATCH 06/11] leds: trigger: netdev: add knob to set hw control possible, Christian Marangi
  • [PATCH 08/11] leds: trigger: netdev: add support for LED hw control, Christian Marangi
    • Re: [PATCH 08/11] leds: trigger: netdev: add support for LED hw control, Andrew Lunn
      • Re: [PATCH 08/11] leds: trigger: netdev: add support for LED hw control, Christian Marangi
  • [PATCH 09/11] leds: trigger: netdev: init mode if hw control already active, Christian Marangi
  • [PATCH 10/11] leds: trigger: netdev: expose netdev trigger modes in linux include, Christian Marangi
  • [PATCH 11/11] net: dsa: qca8k: implement hw_control ops, Christian Marangi
  • Re: [PATCH 00/11] leds: introduce new LED hw control APIs, Sascha Hauer
    • Re: [PATCH 00/11] leds: introduce new LED hw control APIs, Christian Marangi
      • Re: [PATCH 00/11] leds: introduce new LED hw control APIs, Sascha Hauer
        • Re: [PATCH 00/11] leds: introduce new LED hw control APIs, Andrew Lunn
• [lee-leds:for-leds-next-next] BUILD SUCCESS fea27b037127c924221325d65c7966cb4c8c3603, kernel test robot
• [RFC RESEND 0/3] Add support control UP board CPLD/FPGA pin control, larry.lai
  • [RFC RESEND 1/3] mfd: Add support for UP board CPLD/FPGA, larry.lai
    • Re: [RFC RESEND 1/3] mfd: Add support for UP board CPLD/FPGA, Lee Jones
  • [RFC RESEND 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA, larry.lai
  • [RFC RESEND 3/3] leds: Add support for UP board CPLD onboard LEDS, larry.lai
    • Re: [RFC RESEND 3/3] leds: Add support for UP board CPLD onboard LEDS, Lee Jones
• [lee-leds:for-leds-next] BUILD SUCCESS 36cd9fb5344675e9b9d9f96eabcb3cdfdbacc841, kernel test robot
• [PATCH] dt-bindings: leds: Drop redundant cpus enum match, Nishanth Menon
  • Re: [PATCH] dt-bindings: leds: Drop redundant cpus enum match, Manivannan Sadhasivam
  • Re: [PATCH] dt-bindings: leds: Drop redundant cpus enum match, Rob Herring
  • Re: [PATCH] dt-bindings: leds: Drop redundant cpus enum match, Lee Jones
• [PATCH v8 0/2] leds: lp55xx: configure internal charge pump, Maarten Zanders
  • [PATCH v8 1/2] dt-bindings: leds-lp55xx: add ti,charge-pump-mode, Maarten Zanders
    • Re: [PATCH v8 1/2] dt-bindings: leds-lp55xx: add ti,charge-pump-mode, Lee Jones
  • [PATCH v8 2/2] leds: lp55xx: configure internal charge pump, Maarten Zanders
    • Re: [PATCH v8 2/2] leds: lp55xx: configure internal charge pump, Lee Jones
• [PATCH v6] leds: max597x: Add support for max597x, Naresh Solanki
  • Re: [PATCH v6] leds: max597x: Add support for max597x, Lee Jones
• [PATCH v2 0/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Hans de Goede
  • [PATCH v2 3/5] leds: cht-wcove: Add support for breathing mode use hw_pattern sysfs API, Hans de Goede
    • Re: [PATCH v2 3/5] leds: cht-wcove: Add support for breathing mode use hw_pattern sysfs API, Lee Jones
      • Re: [PATCH v2 3/5] leds: cht-wcove: Add support for breathing mode use hw_pattern sysfs API, Jacek Anaszewski
  • [PATCH v2 4/5] leds: cht-wcove: Set default trigger for charging LED, Hans de Goede
  • [PATCH v2 5/5] leds: cht-wcove: Use breathing when LED_INIT_DEFAULT_TRIGGER is set, Hans de Goede
  • [PATCH v2 2/5] leds: cht-wcove: Add suspend/resume handling, Hans de Goede
  • [PATCH v2 1/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Hans de Goede
    • Re: [PATCH v2 1/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Lee Jones
      • Re: [PATCH v2 1/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Hans de Goede
        • Re: [PATCH v2 1/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Lee Jones
          • Re: [PATCH v2 1/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Hans de Goede
• [PATCH 0/5] leds: trigger: netdev: fixup preparation for LEDs hw control, Christian Marangi
  • [PATCH 1/5] leds: trigger: netdev: recheck NETDEV_LED_MODE_LINKUP on dev rename, Christian Marangi
    • Re: [PATCH 1/5] leds: trigger: netdev: recheck NETDEV_LED_MODE_LINKUP on dev rename, Andrew Lunn
    • Re: [PATCH 1/5] leds: trigger: netdev: recheck NETDEV_LED_MODE_LINKUP on dev rename, Lee Jones
  • [PATCH 5/5] leds: trigger: netdev: use mutex instead of spinlocks, Christian Marangi
    • Re: [PATCH 5/5] leds: trigger: netdev: use mutex instead of spinlocks, Andrew Lunn
    • Re: [PATCH 5/5] leds: trigger: netdev: use mutex instead of spinlocks, Lee Jones
  • [PATCH 4/5] leds: trigger: netdev: convert device attr to macro, Christian Marangi
    • Re: [PATCH 4/5] leds: trigger: netdev: convert device attr to macro, Andrew Lunn
    • Re: [PATCH 4/5] leds: trigger: netdev: convert device attr to macro, Lee Jones
  • [PATCH 2/5] leds: trigger: netdev: drop NETDEV_LED_MODE_LINKUP from mode, Christian Marangi
    • Re: [PATCH 2/5] leds: trigger: netdev: drop NETDEV_LED_MODE_LINKUP from mode, Andrew Lunn
    • Re: [PATCH 2/5] leds: trigger: netdev: drop NETDEV_LED_MODE_LINKUP from mode, Lee Jones
  • [PATCH 3/5] leds: trigger: netdev: rename add namespace to netdev trigger enum modes, Christian Marangi
    • Re: [PATCH 3/5] leds: trigger: netdev: rename add namespace to netdev trigger enum modes, Andrew Lunn
    • Re: [PATCH 3/5] leds: trigger: netdev: rename add namespace to netdev trigger enum modes, Lee Jones
• [PATCH v6 0/2] leds: Add a driver for the BD2606MVV, Andreas Kemnade
  • [PATCH v6 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED, Andreas Kemnade
    • Re: [PATCH v6 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED, Lee Jones
  • [PATCH v6 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver, Andreas Kemnade
    • Re: [PATCH v6 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver, Lee Jones
      • Re: [PATCH v6 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver, Andreas Kemnade
        • Re: [PATCH v6 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver, Lee Jones
• [PATCH v2 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3, Luca Weiss
  • [PATCH v2 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support, Luca Weiss
    • Re: [PATCH v2 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support, Dmitry Baryshkov
  • [PATCH v2 7/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Luca Weiss
    • Re: [PATCH v2 7/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Konrad Dybcio
  • [PATCH v2 8/8] Documentation: leds: Add "rgb:status" path, Luca Weiss
    • Re: [PATCH v2 8/8] Documentation: leds: Add "rgb:status" path, Lee Jones
      • Re: [PATCH v2 8/8] Documentation: leds: Add "rgb:status" path, Luca Weiss
  • [PATCH v2 1/8] dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632, Luca Weiss
    • Re: [PATCH v2 1/8] dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632, Krzysztof Kozlowski
  • [PATCH v2 3/8] dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block, Luca Weiss
    • Re: [PATCH v2 3/8] dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block, Lee Jones
  • [PATCH v2 6/8] arm64: dts: qcom: Add PMI632 PMIC, Luca Weiss
    • Re: [PATCH v2 6/8] arm64: dts: qcom: Add PMI632 PMIC, Konrad Dybcio
  • [PATCH v2 4/8] leds: qcom-lpg: Add support for PMI632 LPG, Luca Weiss
    • Re: [PATCH v2 4/8] leds: qcom-lpg: Add support for PMI632 LPG, Lee Jones
  • [PATCH v2 5/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible, Luca Weiss
    • Re: [PATCH v2 5/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible, Lee Jones
  • Re: [PATCH v2 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3, Linus Walleij
  • Re: [PATCH v2 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3, Lee Jones
• [PATCH] docs: leds: ledtrig-oneshot: Fix spelling mistake, Alexander Dahl
  • Re: [PATCH] docs: leds: ledtrig-oneshot: Fix spelling mistake, Pavel Machek
  • Re: [PATCH] docs: leds: ledtrig-oneshot: Fix spelling mistake, Lee Jones
• [net-next PATCH v7 00/16] net: Add basic LED support for switch/phy, Christian Marangi
  • [net-next PATCH v7 02/16] net: dsa: qca8k: add LEDs basic support, Christian Marangi
    • Re: [net-next PATCH v7 02/16] net: dsa: qca8k: add LEDs basic support, Florian Fainelli
  • [net-next PATCH v7 01/16] net: dsa: qca8k: move qca8k_port_to_phy() to header, Christian Marangi
  • [net-next PATCH v7 03/16] net: dsa: qca8k: add LEDs blink_set() support, Christian Marangi
  • [net-next PATCH v7 04/16] leds: Provide stubs for when CLASS_LED & NEW_LEDS are disabled, Christian Marangi
  • [net-next PATCH v7 05/16] net: phy: Add a binding for PHY LEDs, Christian Marangi
    • Re: [net-next PATCH v7 05/16] net: phy: Add a binding for PHY LEDs, Florian Fainelli
  • [net-next PATCH v7 07/16] net: phy: marvell: Add software control of the LEDs, Christian Marangi
  • [net-next PATCH v7 06/16] net: phy: phy_device: Call into the PHY driver to set LED brightness, Christian Marangi
  • [net-next PATCH v7 09/16] net: phy: marvell: Implement led_blink_set(), Christian Marangi
  • [net-next PATCH v7 12/16] ARM: dts: qcom: ipq8064-rb3011: Drop unevaluated properties in switch nodes, Christian Marangi
  • [net-next PATCH v7 10/16] dt-bindings: net: ethernet-controller: Document support for LEDs node, Christian Marangi
  • [net-next PATCH v7 13/16] ARM: dts: qcom: ipq8064-rb3011: Add Switch LED for each port, Christian Marangi
    • Re: [net-next PATCH v7 13/16] ARM: dts: qcom: ipq8064-rb3011: Add Switch LED for each port, Krzysztof Kozlowski
      • Re: [net-next PATCH v7 13/16] ARM: dts: qcom: ipq8064-rb3011: Add Switch LED for each port, Christian Marangi
        • Re: [net-next PATCH v7 13/16] ARM: dts: qcom: ipq8064-rb3011: Add Switch LED for each port, Krzysztof Kozlowski
  • [net-next PATCH v7 08/16] net: phy: phy_device: Call into the PHY driver to set LED blinking, Christian Marangi
  • [net-next PATCH v7 11/16] dt-bindings: net: dsa: qca8k: add LEDs definition example, Christian Marangi
  • [net-next PATCH v7 15/16] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port, Christian Marangi
  • [net-next PATCH v7 16/16] Documentation: LEDs: Describe good names for network LEDs, Christian Marangi
  • [net-next PATCH v7 14/16] dt-bindings: net: phy: Document support for LEDs node, Christian Marangi
  • Re: [net-next PATCH v7 00/16] net: Add basic LED support for switch/phy, Jakub Kicinski
    • Re: [net-next PATCH v7 00/16] net: Add basic LED support for switch/phy, Andrew Lunn
    • Re: [net-next PATCH v7 00/16] net: Add basic LED support for switch/phy, Andrew Lunn
  • Re: [net-next PATCH v7 00/16] net: Add basic LED support for switch/phy, patchwork-bot+netdevbpf
• [PATCH v5] leds: max597x: Add support for max597x, Naresh Solanki
  • Re: [PATCH v5] leds: max597x: Add support for max597x, Lee Jones
    • Re: [PATCH v5] leds: max597x: Add support for max597x, Naresh Solanki
      • Re: [PATCH v5] leds: max597x: Add support for max597x, Lee Jones
        • Re: [PATCH v5] leds: max597x: Add support for max597x, Naresh Solanki
          • Re: [PATCH v5] leds: max597x: Add support for max597x, Lee Jones
            • Re: [PATCH v5] leds: max597x: Add support for max597x, Naresh Solanki
              • Re: [PATCH v5] leds: max597x: Add support for max597x, Naresh Solanki
• [PATCH v5 0/2] leds: Add a driver for the BD2606MVV, Andreas Kemnade
  • [PATCH v5 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED, Andreas Kemnade
    • Re: [PATCH v5 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED, Rob Herring
  • [PATCH v5 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver, Andreas Kemnade
    • Re: [PATCH v5 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver, Pavel Machek
• [PATCH] leds: pwm-multicolor: Simplify an error message, Christophe JAILLET
  • Re: [PATCH] leds: pwm-multicolor: Simplify an error message, Lee Jones
• [lee-leds:for-leds-next] BUILD SUCCESS c1087c29e96a48e9080377e168d35dcb52fb068b, kernel test robot
• [PATCH] leds: trigger/tty: Use led_set_brightness_nosleep() to set brightness, Uwe Kleine-König
  • Re: [PATCH] leds: trigger/tty: Use led_set_brightness_nosleep() to set brightness, Jacek Anaszewski
  • Re: [PATCH] leds: trigger/tty: Use led_set_brightness_nosleep() to set brightness, Florian Eckert
  • Re: [PATCH] leds: trigger/tty: Use led_set_brightness_nosleep() to set brightness, Pavel Machek
    • Re: [PATCH] leds: trigger/tty: Use led_set_brightness_nosleep() to set brightness, Uwe Kleine-König
      • Re: [PATCH] leds: trigger/tty: Use led_set_brightness_nosleep() to set brightness, Jacek Anaszewski
        • Re: [PATCH] leds: trigger/tty: Use led_set_brightness_nosleep() to set brightness, Uwe Kleine-König
          • Re: [PATCH] leds: trigger/tty: Use led_set_brightness_nosleep() to set brightness, Jacek Anaszewski
            • Re: [PATCH] leds: trigger/tty: Use led_set_brightness_nosleep() to set brightness, Uwe Kleine-König
              • Re: [PATCH] leds: trigger/tty: Use led_set_brightness_nosleep() to set brightness, Jacek Anaszewski
                • Re: [PATCH] leds: trigger/tty: Use led_set_brightness_nosleep() to set brightness, Jacek Anaszewski
• [PATCH v4 0/2] leds: Add a driver for the BD2606MVV, Andreas Kemnade
  • [PATCH v4 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver, Andreas Kemnade
    • Re: [PATCH v4 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver, Pavel Machek
      • Re: [PATCH v4 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver, Andreas Kemnade
        • Re: [PATCH v4 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver, Pavel Machek
        • Re: [PATCH v4 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver, Pavel Machek
  • [PATCH v4 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED driver, Andreas Kemnade
    • Re: [PATCH v4 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED driver, Krzysztof Kozlowski
      • Re: [PATCH v4 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED driver, Andreas Kemnade
        • Re: [PATCH v4 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED driver, Andreas Kemnade
        • Re: [PATCH v4 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED driver, Krzysztof Kozlowski
          • Re: [PATCH v4 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED driver, Andreas Kemnade
• [PATCH 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3, Luca Weiss
  • [PATCH 4/8] leds: qcom-lpg: Add support for PMI632 LPG, Luca Weiss
    • Re: [PATCH 4/8] leds: qcom-lpg: Add support for PMI632 LPG, Konrad Dybcio
    • Re: [PATCH 4/8] leds: qcom-lpg: Add support for PMI632 LPG, Pavel Machek
  • [PATCH 1/8] dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632, Luca Weiss
    • Re: [PATCH 1/8] dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632, Krzysztof Kozlowski
  • [PATCH 7/8] arm64: dts: qcom: Add PMI632 PMIC, Luca Weiss
  • [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Luca Weiss
    • Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Konrad Dybcio
      • Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Luca Weiss
    • Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Pavel Machek
      • Re: [PATCH 8/8] arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED, Luca Weiss
  • [PATCH 5/8] dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling, Luca Weiss
    • Re: [PATCH 5/8] dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling, Krzysztof Kozlowski
      • Re: [PATCH 5/8] dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling, Jonathan Cameron
  • [PATCH 3/8] dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block, Luca Weiss
    • Re: [PATCH 3/8] dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block, Krzysztof Kozlowski
  • [PATCH 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support, Luca Weiss
    • Re: [PATCH 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support, Konrad Dybcio
    • Re: [PATCH 2/8] pinctrl: qcom: spmi-gpio: Add PMI632 support, Linus Walleij
  • [PATCH 6/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible, Luca Weiss
    • Re: [PATCH 6/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible, Krzysztof Kozlowski
    • Re: [PATCH 6/8] dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible, Pavel Machek
• [PATCH 0/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Hans de Goede
  • [PATCH 2/5] leds: cht-wcove: Add suspend/resume handling, Hans de Goede
    • Re: [PATCH 2/5] leds: cht-wcove: Add suspend/resume handling, Pavel Machek
  • [PATCH 1/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Hans de Goede
    • Re: [PATCH 1/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Pavel Machek
      • Re: [PATCH 1/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Hans de Goede
      • Re: [PATCH 1/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Hans de Goede
  • [PATCH 3/5] leds: cht-wcove: Add support for breathing mode use hw_pattern sysfs API, Hans de Goede
    • Re: [PATCH 3/5] leds: cht-wcove: Add support for breathing mode use hw_pattern sysfs API, Jacek Anaszewski
      • Re: [PATCH 3/5] leds: cht-wcove: Add support for breathing mode use hw_pattern sysfs API, Hans de Goede
        • Re: [PATCH 3/5] leds: cht-wcove: Add support for breathing mode use hw_pattern sysfs API, Jacek Anaszewski
          • Re: [PATCH 3/5] leds: cht-wcove: Add support for breathing mode use hw_pattern sysfs API, Hans de Goede
  • [PATCH 5/5] leds: cht-wcove: Use breathing when LED_INIT_DEFAULT_TRIGGER is set, Hans de Goede
  • [PATCH 4/5] leds: cht-wcove: Set default trigger for charging LED, Hans de Goede
  • Re: [PATCH 0/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Yauhen Kharuzhy
    • Re: [PATCH 0/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Hans de Goede
      • Re: [PATCH 0/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Hans de Goede
        • Re: [PATCH 0/5] leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driver, Yauhen Kharuzhy
• [PATCH v3 0/2] leds: Add a driver for the BD2606MVV, Andreas Kemnade
  • [PATCH v3 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver, Andreas Kemnade
    • Re: [PATCH v3 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver, Matti Vaittinen
  • [PATCH v3 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED driver, Andreas Kemnade
    • Re: [PATCH v3 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED driver, Pavel Machek
    • Re: [PATCH v3 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED driver, Matti Vaittinen
• [PATCH v4] leds: max597x: Add support for max597x, Naresh Solanki
  • Re: [PATCH v4] leds: max597x: Add support for max597x, Pavel Machek
    • Re: [PATCH v4] leds: max597x: Add support for max597x, Naresh Solanki
• [PATCH 0/4] Fix oops about sleeping in led_trigger_blink(), Hans de Goede
  • [PATCH 3/4] leds: Fix oops about sleeping in led_trigger_blink(), Hans de Goede
  • [PATCH 2/4] leds: Fix set_brightness_delayed() race, Hans de Goede
  • [PATCH 1/4] leds: Change led_trigger_blink[_oneshot]() delay parameters to pass-by-value, Hans de Goede
    • Re: [PATCH 1/4] leds: Change led_trigger_blink[_oneshot]() delay parameters to pass-by-value, Lee Jones
      • Re: [PATCH 1/4] leds: Change led_trigger_blink[_oneshot]() delay parameters to pass-by-value, Hans de Goede
  • [PATCH 4/4] leds: Clear LED_INIT_DEFAULT_TRIGGER when clearing current trigger, Hans de Goede
  • Re: [PATCH 0/4] Fix oops about sleeping in led_trigger_blink(), Jacek Anaszewski
  • Re: [PATCH 0/4] Fix oops about sleeping in led_trigger_blink(), Lee Jones
    • Re: [PATCH 0/4] Fix oops about sleeping in led_trigger_blink(), Hans de Goede
      • Re: [PATCH 0/4] Fix oops about sleeping in led_trigger_blink(), Lee Jones
        • Re: [PATCH 0/4] Fix oops about sleeping in led_trigger_blink(), Hans de Goede
          • Re: [PATCH 0/4] Fix oops about sleeping in led_trigger_blink(), Lee Jones
            • Re: [PATCH 0/4] Fix oops about sleeping in led_trigger_blink(), Yauhen Kharuzhy
            • Re: [PATCH 0/4] Fix oops about sleeping in led_trigger_blink(), Hans de Goede
• [PATCH v3] dt-bindings: leds: Fix reference to definition of default-state, Jonathan Neuschäfer