Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- Re: [PATCH 08/10] iio: imu: adis16480: assign bias value only if operation succeeded, (continued)
- [PATCH v3] dt-bindings: iio: accel: add binding documentation for ADIS16240,
Rodrigo Carvalho
- [PULL] 2nd set of IIO + counter new device support, features etc for the 5.5 cycle.,
Jonathan Cameron
- [PATCH 0/4] Convert STM32 Timer mdf bindings to yaml,
Benjamin Gaignard
- [RFC] iio: srf04: add parallax ping sensors,
Andreas Klinger
- [PULL] 2nd set of IIO fixes for the 5.4 cycle.,
Jonathan Cameron
- Re: [PATCH 4/9] drivers/iio: Sign extend without triggering implementation-defined behavior, Jonathan Cameron
- [PATCH] iio: imu: adis: assign value only if return code zero in read funcs,
Alexandru Ardelean
- [PATCH 0/2] iio: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops,
zhong jiang
- [PATCH] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml,
Marcus Folkesson
- [PATCH v2 1/4] iio: adc: Add support for AD7091R5 ADC,
Beniamin Bia
- [PATCH v2 1/2] iio: adis16480: Fix scales factors,
Nuno Sá
- [PATCH 0/2] iio: adc: stm32: add max clock rate,
Fabrice Gasnier
- Re: [PATCH][RESEND] New driver for TLV493D-A1B6 I2C chip, input and hwmon class device., Jonathan Cameron
- [PATCH v3 00/18] cros_ec: Add sensorhub driver and FIFO processing,
Gwendal Grignou
- [PATCH v3 02/18] mfd: cros_ec: Add sensor_count and make check_features public, Gwendal Grignou
- [PATCH v3 01/18] platform: chrome: Put docs with the code, Gwendal Grignou
- [PATCH v3 06/18] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number, Gwendal Grignou
- [PATCH v3 07/18] platform: chrome: cros_ec: handle MKBP more events flag, Gwendal Grignou
- [PATCH v3 08/18] Revert "Input: cros_ec_keyb - add back missing mask for event_type", Gwendal Grignou
- [PATCH v3 09/18] Revert "Input: cros_ec_keyb: mask out extra flags in event_type", Gwendal Grignou
- [PATCH v3 10/18] platform: chrome: sensorhub: Add FIFO support, Gwendal Grignou
- [PATCH v3 12/18] platform: chrome: sensorhub: Add median filter, Gwendal Grignou
- [PATCH v3 17/18] iio: cros_ec: Report hwfifo_watermark_max, Gwendal Grignou
- [PATCH v3 05/18] platform: chrome: cros-ec: record event timestamp in the hard irq, Gwendal Grignou
- [PATCH v3 14/18] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO, Gwendal Grignou
- [PATCH v3 18/18] iio: cros_ec: Use Hertz as unit for sampling frequency, Gwendal Grignou
- [PATCH v3 16/18] iio: cros_ec: Expose hwfifo_timeout, Gwendal Grignou
- [PATCH v3 15/18] iio: cros_ec: Remove pm function, Gwendal Grignou
- [PATCH v3 13/18] iio: cros_ec: Move function description to .c file, Gwendal Grignou
- [PATCH v3 11/18] platform: chrome: sensorhub: Add code to spread timestmap, Gwendal Grignou
- [PATCH v3 04/18] platform/mfd:iio: cros_ec: Register sensor through sensorhub, Gwendal Grignou
- [PATCH v3 03/18] platform: cros_ec: Add cros_ec_sensor_hub driver, Gwendal Grignou
- [PATCH 0/2] support rational ODRs in st_lsm6dsx,
Lorenzo Bianconi
- [PATCH] iio: imu: st_lsm6dsx: fix ODR check in st_lsm6dsx_write_raw,
Lorenzo Bianconi
- [PATCH] iio: adc: stm32-adc: fix stopping dma,
Fabrice Gasnier
- [PATCH 1/2] iio: adis16480: Fix scales factors,
Nuno Sá
- [PATCH 0/2] add support to STM LSM6DSRX 6-axis Mems sensor,
Lorenzo Bianconi
- [PATCH] iio: st: Drop GPIO include,
Linus Walleij
- [PATCH] iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positions,
Alexandru Ardelean
- [PATCH] iio: dln2-adc: fix iio_triggered_buffer_postenable() position,
Alexandru Ardelean
- [PATCH] iio: at91-sama5d2_adc: fix iio_triggered_buffer_{predisable,postenable} positions,
Alexandru Ardelean
- [PATCH v5 3/3] iio: documentation: light: Add veml6030 sysfs documentation,
Rishi Gupta
- [PATCH v5 2/3] dt-bindings: iio: light: add veml6030 ALS bindings,
Rishi Gupta
- [PATCH v5 1/3] iio: light: add driver for veml6030 ambient light sensor,
Rishi Gupta
- [PATCH] dt-bindings: mma8452: Re-word 'interrupt-names' description,
Andrey Smirnov
- [PATCH 1/4] iio: adc: Add support for AD7091R5 ADC,
Beniamin Bia
- [PATCH v2 00/18] cros_ec: Add sensorhub driver and FIFO processing*** SUBJECT HERE,
Gwendal Grignou
- [PATCH v2 06/18] platform: chrome: cros_ec: Do not attempt to register a non-positive IRQ number, Gwendal Grignou
- [PATCH v2 05/18] platform: chrome: cros-ec: record event timestamp in the hard irq, Gwendal Grignou
- [PATCH v2 09/18] Revert "Input: cros_ec_keyb: mask out extra flags in event_type", Gwendal Grignou
- [PATCH v2 13/18] iio: cros_ec: Move function description to .c file, Gwendal Grignou
- [PATCH v2 14/18] iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO, Gwendal Grignou
- [PATCH v2 15/18] iio: cros_ec: Remove pm function, Gwendal Grignou
- [PATCH v2 16/18] iio: cros_ec: Expose hwfifo_timeout, Gwendal Grignou
- [PATCH v2 17/18] iio: cros_ec: Report hwfifo_watermark_max, Gwendal Grignou
- [PATCH v2 18/18] iio: cros_ec: Use Hertz as unit for sampling frequency, Gwendal Grignou
- [PATCH v2 12/18] platform: chrome: sensorhub: Add median filter, Gwendal Grignou
- [PATCH v2 04/18] platform/mfd:iio: cros_ec: Register sensor through sensorhub, Gwendal Grignou
- [PATCH v2 03/18] platform: cros_ec: Add cros_ec_sensor_hub driver, Gwendal Grignou
- [PATCH v2 07/18] platform: chrome: cros_ec: handle MKBP more events flag, Gwendal Grignou
- [PATCH v2 11/18] platform: chrome: sensorhub: Add code to spread timestmap, Gwendal Grignou
- [PATCH v2 10/18] platform: chrome: sensorhub: Add FIFO support, Gwendal Grignou
- [PATCH v2 08/18] Revert "Input: cros_ec_keyb - add back missing mask for event_type", Gwendal Grignou
- [PATCH v2 02/18] mfd: cros_ec: Add sensor_count and make check_features public, Gwendal Grignou
- [PATCH v2 01/18] platform: chrome: Put docs with the code, Gwendal Grignou
- Re: [PATCH v2 00/18] cros_ec: Add sensorhub driver and FIFO processing*** SUBJECT HERE, Jonathan Cameron
- [PATCH 0/8] Add support for Azoteq IQS620A/621/622/624/625,
Jeff LaBundy
- [PATCH AUTOSEL 4.19 050/100] iio: adc: meson_saradc: Fix memory allocation order, Sasha Levin
- [PATCH AUTOSEL 4.19 051/100] iio: fix center temperature of bmc150-accel-core, Sasha Levin
- [PATCH AUTOSEL 4.19 090/100] iio: imu: adis16400: release allocated memory on failure, Sasha Levin
- [PATCH AUTOSEL 4.19 089/100] iio: adc: hx711: fix bug in sampling of data, Sasha Levin
- [PATCH AUTOSEL 4.19 091/100] iio: adc: ad799x: fix probe error handling, Sasha Levin
- [PATCH AUTOSEL 4.19 092/100] iio: light: opt3001: fix mutex unlock race, Sasha Levin
- [PATCH AUTOSEL 4.14 19/56] iio: adc: meson_saradc: Fix memory allocation order, Sasha Levin
- [PATCH AUTOSEL 4.14 20/56] iio: fix center temperature of bmc150-accel-core, Sasha Levin
- [PATCH AUTOSEL 4.14 48/56] iio: adc: ad799x: fix probe error handling, Sasha Levin
- [PATCH AUTOSEL 4.14 49/56] iio: light: opt3001: fix mutex unlock race, Sasha Levin
- [PATCH AUTOSEL 4.9 09/29] iio: fix center temperature of bmc150-accel-core, Sasha Levin
- [PATCH AUTOSEL 4.9 23/29] iio: adc: ad799x: fix probe error handling, Sasha Levin
- [PATCH AUTOSEL 4.4 06/21] iio: fix center temperature of bmc150-accel-core, Sasha Levin
- [PATCH AUTOSEL 4.4 16/21] iio: adc: ad799x: fix probe error handling, Sasha Levin
- [PATCH AUTOSEL 4.4 17/21] iio: light: opt3001: fix mutex unlock race, Sasha Levin
- [PATCH AUTOSEL 4.9 24/29] iio: light: opt3001: fix mutex unlock race, Sasha Levin
- [PATCH AUTOSEL 5.3 01/89] iio: adc: meson_saradc: Fix memory allocation order,
Sasha Levin
- [PATCH AUTOSEL 5.3 78/89] iio: adc: ad799x: fix probe error handling, Sasha Levin
- [PATCH AUTOSEL 5.3 76/89] iio: light: fix vcnl4000 devicetree hooks, Sasha Levin
- [PATCH AUTOSEL 5.3 79/89] iio: light: opt3001: fix mutex unlock race, Sasha Levin
- [PATCH AUTOSEL 5.3 74/89] iio: imu: adis16400: fix memory leak, Sasha Levin
- [PATCH AUTOSEL 5.3 77/89] iio: light: add missing vcnl4040 of_compatible, Sasha Levin
- [PATCH AUTOSEL 5.3 75/89] iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller, Sasha Levin
- [PATCH AUTOSEL 5.3 73/89] iio: imu: adis16400: release allocated memory on failure, Sasha Levin
- [PATCH AUTOSEL 5.3 69/89] iio: adc: hx711: fix bug in sampling of data, Sasha Levin
- [PATCH AUTOSEL 5.3 72/89] iio: accel: adxl372: Perform a reset at start up, Sasha Levin
- [PATCH AUTOSEL 5.3 71/89] iio: accel: adxl372: Fix push to buffers lost samples, Sasha Levin
- [PATCH AUTOSEL 5.3 70/89] iio: accel: adxl372: Fix/remove limitation for FIFO samples, Sasha Levin
- [PATCH AUTOSEL 5.3 02/89] iio: fix center temperature of bmc150-accel-core, Sasha Levin
- [PATCH] tools: iio: Correctly add make dependency for iio_utils,
Laura Abbott
- [PATCH] mfd: ab8500: Fix up the GPADC binding example,
Linus Walleij
- [PATCH] iio: imu: inv_mpu6050: fix no data on MPU6050,
Jean-Baptiste Maneyrol
[PATCH] staging: iio: ad9834: add a check for devm_clk_get,
Chuhong Yuan
[PATCH] iio: adc: max9611: Defer probe on POR read,
Jacopo Mondi
[PATCH v2 2/2] dt-bindings: iio: adc: Add DT docs for AD7292,
Marcelo Schmitt
[PATCH v2 1/2] iio: adc: Add driver support for AD7292,
Marcelo Schmitt
[PATCH v2 0/2] iio: adc: Add driver support for AD7292, Marcelo Schmitt
Re: [PATCH v3 2/2] iio: (bma400) add driver for the BMA400 (fwd), Julia Lawall
[PATCH] iio: temp: maxim thermocouple: Drop unneeded semi colon.,
jic23
[PATCH] iio: light: adux1020: Drop an unwanted semicolon.,
jic23
[PATCH] iio: dac: vf610: Use devm_platform_ioremap_resource,
jic23
[PATCH] iio: dac: lpc18xx: Use devm_platform_ioremap_resource,
jic23
[PATCH] iio: chemical: sgp30: drop excess semicolon,
jic23
[PATCH] iio: adc: xilinix-xadc: use devm_platform_ioremap_resource,
jic23
[PATCH] iio: adc: vf610: use devm_platform_ioremap_resource,
jic23
[PATCH] iio: adc: tsl4030: Use false / true instead of 0 / 1 with booleans,
jic23
[PATCH] iio: adc: cpcap-adc: Fix missing IRQF_ONESHOT as only threaded handler.,
jic23
[PATCH] iio: adc: spear_adc: Use devm_platform_ioremap_resource,
jic23
[PATCH] iio: adc: rcar-gyroadc: use devm_platform_ioremap_resource,
jic23
[PATCH] iio: adc: npcm: use devm_platform_ioremap_resource,
jic23
[PATCH] iio: adc: meson_saradc: use devm_platform_ioremap_resource,
jic23
[PATCH] iio: adc: lpc18xx: use devm_platform_ioremap_resource,
jic23
[PATCH] iio: adc: ingenic: Use devm_platform_ioremap_resource,
jic23
[PATCH 2/2] dt-bindings: iio: adc: Add DT docs for AD7292,
Marcelo Schmitt
[PATCH 1/2] iio: adc: Add driver support for AD7292,
Marcelo Schmitt
[PATCH 0/2] iio: adc: Add driver support for AD7292, Marcelo Schmitt
[PATCH 1/2] iio: adc: exynos: Drop a stray semicolon,
jic23
[PATCH] iio: adc: cc10001: use devm_platform_ioremap_resource,
jic23
[PATCH] iio: adc: bcm_iproc_adc: drop a stray semicolon,
jic23
[PATCH] iio: adc: mt6577_auxdac: use devm_platform_ioremap_resource,
jic23
[PATCH] iio: adc: aspeed: use devm_platform_ioremap_resource,
jic23
[PATCH] iio: proximity: pulsedlight v2: Tidy up an endian issue,
jic23
[PATCH] iio: pressure: bmp280 endian tidy ups,
jic23
[PATCH] iio: gyro: mpu3050: Explicity make a 'poison' value big endian,
jic23
[PATCH] iio: chemical: sps30: Explicity truncate constant by masking,
jic23
[PATCH] iio:adc:ti-adc084s021: Endian casting tidy ups.,
jic23
[PATCH] mfd: twl: endian fixups in i2c write and read wrappers.,
jic23
[PATCH] iio:adc:stmpe-adc: Cleanup endian type of local variable,
jic23
[PATCH] iio:adc:mcp320x: Tidy up endian types in type cast.,
jic23
[PATCH] iio:adc:at91-sama5d2: Replace 0 with NULL when clearing some pointers.,
jic23
Note IIO togreg branch rebased., Jonathan Cameron
[PULL v3] First set of iio new device support etc for the 5.5 cycle,
Jonathan Cameron
[PATCH v3 0/2] iio: add driver for Bosch BMA400 accelerometer,
Dan Robertson
[RFC] iio: adis: Fix build warnings due to disagreement on whether ret can be > 0,
jic23
[PULL v2] First set of iio new device support etc for the 5.5 cycle,
Jonathan Cameron
[PULL] First set of IIO new device support etc for the 5.5 cycle.,
Jonathan Cameron
[PATCH v2 0/2] iio: add driver for Bosch BMA400 accelerometer,
Dan Robertson
[PATCH] dt-bindings: Clean-up regulator '-supply' schemas,
Rob Herring
[PATCH v3 0/2] Add support for ADUX1020 sensor,
Manivannan Sadhasivam
[PATCH][RFC] iio: core: add a class hierarchy on iio device lock,
Olivier Moysan
[PATCH v4 0/8] Introduce max12xx ADC support,
Miquel Raynal
[PATCH v4 1/2] iio: temperature: Add support for LTC2983,
Nuno Sá
[PATCH 0/7 v4] AB8500 GPADC MFD to IIO conversion,
Linus Walleij
[PULL] 1st set of IIO fixes for the 5.4 cycle.,
Jonathan Cameron
[PATCH] iio: dac: stm32: add power management support,
Fabrice Gasnier
[PATCH v2] iio: imu: adis16480: make sure provided frequency is positive,
Alexandru Ardelean
[PATCH] iio: imu: st_lsm6dsx: enable drdy-mask if available,
Lorenzo Bianconi
[PATCH] iio: imu: adis16400: fix compiler warnings,
Alexandru Ardelean
[PATCH 1/3] iio: imu: adis: add doc-string for `adis` struct,
Alexandru Ardelean
[PATCH] iio: imu: st_lsm6dsx: explicitly define odr table size,
Lorenzo Bianconi
[PATCH v3] dt-bindings: iio: maxbotix,mb1232.yaml: transform to yaml,
Andreas Klinger
[PATCH v2 0/2] Add support for ADUX1020 sensor,
Manivannan Sadhasivam
[PATCH] iio: imu: st_lsm6dsx: add odr calibration feature,
Mario Tesi
[PATCH v3 0/8] Introduce max12xx ADC support,
Miquel Raynal
[BUG] iio: imu: st_lsm6dsx: read error when resuming from suspend,
Sean Nyekjaer
[PATCH 0/2] Add support for ADUX1020 sensor,
Manivannan Sadhasivam
[PATCH 0/2] add support to STM LSM6DS0 6-axis Mems sensor,
Lorenzo Bianconi
[PATCH] iio: imu: st_lsm6dsx: fix gyro gain definitions for LSM9DS1,
Lorenzo Bianconi
[PATCH v2] iio: pressure: bmp280: use devm action and remove labels from probe,
Bartosz Golaszewski
[PATCH v5 0/3] Simplify count_read/count_write/signal_read,
William Breathitt Gray
[PATCH v4 0/2] Simplify count_read/count_write/signal_read,
William Breathitt Gray
[PATCH v2] iio: srf04: fix wrong limitation in distance measuring,
Andreas Klinger
[PATCH v2] dt-bindings: iio: maxbotix,mb1232.yaml: transform to yaml,
Andreas Klinger
[PATCH 00/13] various st_lsm6dsx fixes and missing bits,
Lorenzo Bianconi
- [PATCH 01/13] iio: imu: st_lsm6dsx: use st_lsm6dsx_read_locked in st_lsm6dsx_report_motion_event, Lorenzo Bianconi
- [PATCH 02/13] iio: imu: st_lsm6dsx: add sanity check for read_fifo pointer, Lorenzo Bianconi
- [PATCH 03/13] iio: imu: st_lsm6dsx: move irq related definitions in irq_config, Lorenzo Bianconi
- [PATCH 04/13] iio: imu: st_lsm6dsx: do not access active-low/open-drain regs if not supported, Lorenzo Bianconi
- [PATCH 05/13] iio: imu: st_lsm6dsx: move bdu/boot and reset register info in hw_settings, Lorenzo Bianconi
- [PATCH 06/13] iio: imu: st_lsm6dsx: always check enable_reg in st_lsm6dsx_event_setup, Lorenzo Bianconi
- [PATCH 07/13] iio: imu: st_lsm6dsx: rely on st_lsm6dsx_update_bits_locked configuring events, Lorenzo Bianconi
- [PATCH 08/13] iio: imu: st_lsm6dsx: grab conf mutex in st_lsm6dsx_write_event_config, Lorenzo Bianconi
- [PATCH 09/13] iio: imu: st_lsm6dsx: fix checkpatch warning, Lorenzo Bianconi
- [PATCH 10/13] iio: imu: st_lsm6dsx: add wakeup_source in st_sensors_platform_data, Lorenzo Bianconi
- [PATCH 11/13] iio: imu: st_lsm6dsx: add missing kernel documenation, Lorenzo Bianconi
- [PATCH 12/13] dt-bindings: iio: imu: st_lsm6dsx: document missing wakeup-source property, Lorenzo Bianconi
- [PATCH 13/13] iio: imu: st_lsm6dsx: enable wake-up event for LSM6DSO, Lorenzo Bianconi
- Re: [PATCH 00/13] various st_lsm6dsx fixes and missing bits, Jonathan Cameron
[PATCH v3 1/2] iio: temperature: Add support for LTC2983,
Nuno Sá
[PATCH v2 0/7] Introduce max12xx ADC support,
Miquel Raynal
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
