On Sat, 14 Dec 2019 17:52:58 +0100
Lorenzo Bianconi <lorenzo@xxxxxxxxxx> wrote:
> Rename st_lsm6dsx_shub_read_reg routine in st_lsm6dsx_shub_read_output
> since it is used to read from sensorhub channel0 output register
>
> Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
Applied.
Thanks,
Jonathan
> ---
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 11 ++++++-----
> 1 file changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> index ccc59682cb66..dc739dfb36f2 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> @@ -101,13 +101,13 @@ static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
> }
>
> /**
> - * st_lsm6dsx_shub_read_reg - read i2c controller register
> + * st_lsm6dsx_shub_read_output - read i2c controller register
> *
> * Read st_lsm6dsx i2c controller register
> */
> static int
> -st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 *data,
> - int len)
> +st_lsm6dsx_shub_read_output(struct st_lsm6dsx_hw *hw, u8 *data,
> + int len)
> {
> const struct st_lsm6dsx_shub_settings *hub_settings;
> int err;
> @@ -243,7 +243,8 @@ st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr,
>
> st_lsm6dsx_shub_wait_complete(hw);
>
> - err = st_lsm6dsx_shub_read_reg(hw, data, len & ST_LS6DSX_READ_OP_MASK);
> + err = st_lsm6dsx_shub_read_output(hw, data,
> + len & ST_LS6DSX_READ_OP_MASK);
>
> st_lsm6dsx_shub_master_enable(sensor, false);
>
> @@ -725,7 +726,7 @@ st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr,
>
> st_lsm6dsx_shub_wait_complete(hw);
>
> - err = st_lsm6dsx_shub_read_reg(hw, &data, sizeof(data));
> + err = st_lsm6dsx_shub_read_output(hw, &data, sizeof(data));
>
> st_lsm6dsx_shub_master_enable(sensor, false);
>
