On Wed, 11 Dec 2019 10:59:46 +0100 <tomislav.denis@xxxxxxx> wrote: > From: Tomislav Denis <tomislav.denis@xxxxxxx> > > Add a device tree binding documentation for DLH series pressure > sensors. > > Signed-off-by: Tomislav Denis <tomislav.denis@xxxxxxx> A few things I fixed up whilst applying this. Applied with these tweaks to the togreg branch of iio.git. Please take a look and check I didn't mess this up. Thanks, Jonathan > --- > .../devicetree/bindings/iio/pressure/asc,dlh.yaml | 51 ++++++++++++++++++++++ Name is now asc,dlhl60d.yaml > MAINTAINERS | 1 + > 2 files changed, 52 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/pressure/asc,dlh.yaml > > diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlh.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlh.yaml > new file mode 100644 > index 0000000..c2c1817 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlh.yaml > @@ -0,0 +1,51 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/pressure/dlh.yaml# This was already wrong, now has asc,dlhl60d.yaml > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: All Sensors DLH series low voltage digital pressure sensors > + > +maintainers: > + - Tomislav Denis <tomislav.denis@xxxxxxx> > + > +description: | > + Bindings for the All Sensors DLH series pressure sensors. > + > + Specifications about the sensors can be found at: > + http://www.allsensors.com/cad/DS-0355_Rev_B.PDF > + > +properties: > + compatible: > + enum: > + - asc,dlhl60d > + - asc,dlhl60g > + > + reg: > + description: I2C device address > + maxItems: 1 > + > + interrupts: > + description: interrupt mapping for EOC(data ready) pin > + maxItems: 1 > + > +required: > + - compatible > + - reg > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + i2c0 { Spacing is pretty random in here. Now consistent 4 space indent throughout. > + #address-cells = <1>; > + #size-cells = <0>; > + > + pressure@29 { > + compatible = "asc,dlhl60d"; > + reg = <0x29>; > + interrupt-parent = <&gpio0>; > + interrupts = <10 IRQ_TYPE_EDGE_RISING>; > + }; > + }; > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index 0fa24df..7e181b9 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -674,6 +674,7 @@ W: http://www.allsensors.com/ > S: Maintained > L: linux-iio@xxxxxxxxxxxxxxx > F: drivers/iio/pressure/dlh.c > +F: Documentation/devicetree/bindings/iio/pressure/asc,dlh.yaml > > ALLEGRO DVT VIDEO IP CORE DRIVER > M: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
