[PATCH 3/5] iio: imu: adis16480: construct adis data on probe vs static on driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This change is done in preparation of adding an `struct adis_timeout` type.
Some ADIS drivers support multiple drivers, with various combinations of
timeouts. Creating static tables for each driver is possible, but that also
creates quite a lot of duplication.

Signed-off-by: Nuno Sá <nuno.sa@xxxxxxxxxx>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
---
 drivers/iio/imu/adis16480.c | 61 ++++++++++++++++++++++---------------
 1 file changed, 37 insertions(+), 24 deletions(-)

diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
index f73094e8d35d..1edfed83d480 100644
--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -1022,29 +1022,6 @@ static const char * const adis16480_status_error_msgs[] = {
 	[ADIS16480_DIAG_STAT_BARO_FAIL] = "Barometer self-test failure",
 };
 
-static const struct adis_data adis16480_data = {
-	.diag_stat_reg = ADIS16480_REG_DIAG_STS,
-	.glob_cmd_reg = ADIS16480_REG_GLOB_CMD,
-	.has_paging = true,
-
-	.read_delay = 5,
-	.write_delay = 5,
-
-	.status_error_msgs = adis16480_status_error_msgs,
-	.status_error_mask = BIT(ADIS16480_DIAG_STAT_XGYRO_FAIL) |
-		BIT(ADIS16480_DIAG_STAT_YGYRO_FAIL) |
-		BIT(ADIS16480_DIAG_STAT_ZGYRO_FAIL) |
-		BIT(ADIS16480_DIAG_STAT_XACCL_FAIL) |
-		BIT(ADIS16480_DIAG_STAT_YACCL_FAIL) |
-		BIT(ADIS16480_DIAG_STAT_ZACCL_FAIL) |
-		BIT(ADIS16480_DIAG_STAT_XMAGN_FAIL) |
-		BIT(ADIS16480_DIAG_STAT_YMAGN_FAIL) |
-		BIT(ADIS16480_DIAG_STAT_ZMAGN_FAIL) |
-		BIT(ADIS16480_DIAG_STAT_BARO_FAIL),
-
-	.enable_irq = adis16480_enable_irq,
-};
-
 static int adis16480_config_irq_pin(struct device_node *of_node,
 				    struct adis16480 *st)
 {
@@ -1195,9 +1172,41 @@ static int adis16480_get_ext_clocks(struct adis16480 *st)
 	return 0;
 }
 
+static struct adis_data *adis16480_adis_data_alloc(struct adis16480 *st,
+						   struct device *dev)
+{
+	struct adis_data *data;
+
+	data = devm_kzalloc(dev, sizeof(struct adis_data), GFP_KERNEL);
+	if (!data)
+		return ERR_PTR(-ENOMEM);
+
+	data->glob_cmd_reg = ADIS16480_REG_GLOB_CMD;
+	data->diag_stat_reg = ADIS16480_REG_DIAG_STS;
+	data->has_paging = true;
+	data->self_test_mask = BIT(1);
+	data->read_delay = 5;
+	data->write_delay = 5;
+	data->status_error_msgs = adis16480_status_error_msgs;
+	data->status_error_mask = BIT(ADIS16480_DIAG_STAT_XGYRO_FAIL) |
+				BIT(ADIS16480_DIAG_STAT_YGYRO_FAIL) |
+				BIT(ADIS16480_DIAG_STAT_ZGYRO_FAIL) |
+				BIT(ADIS16480_DIAG_STAT_XACCL_FAIL) |
+				BIT(ADIS16480_DIAG_STAT_YACCL_FAIL) |
+				BIT(ADIS16480_DIAG_STAT_ZACCL_FAIL) |
+				BIT(ADIS16480_DIAG_STAT_XMAGN_FAIL) |
+				BIT(ADIS16480_DIAG_STAT_YMAGN_FAIL) |
+				BIT(ADIS16480_DIAG_STAT_ZMAGN_FAIL) |
+				BIT(ADIS16480_DIAG_STAT_BARO_FAIL);
+	data->enable_irq = adis16480_enable_irq;
+
+	return data;
+}
+
 static int adis16480_probe(struct spi_device *spi)
 {
 	const struct spi_device_id *id = spi_get_device_id(spi);
+	const struct adis_data *adis16480_data;
 	struct iio_dev *indio_dev;
 	struct adis16480 *st;
 	int ret;
@@ -1218,7 +1227,11 @@ static int adis16480_probe(struct spi_device *spi)
 	indio_dev->info = &adis16480_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = adis_init(&st->adis, indio_dev, spi, &adis16480_data);
+	adis16480_data = adis16480_adis_data_alloc(st, &spi->dev);
+	if (IS_ERR(adis16480_data))
+		return PTR_ERR(adis16480_data);
+
+	ret = adis_init(&st->adis, indio_dev, spi, adis16480_data);
 	if (ret)
 		return ret;
 
-- 
2.20.1




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux