Re: [PATCH v3 4/4] iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2019-12-17 at 08:11 -0300, Daniel Junho wrote:
> The ad7928 is software compatible with the ad7923.
> The ad7908 and ad7918 are the 8 and 10-bit versions of the ad7928.
> 

One minor nit.
Fine to leave it like this.

Reviewed-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>

> Signed-off-by: Daniel Junho <djunho@xxxxxxxxx>
> ---
>  drivers/iio/adc/ad7923.c | 57 +++++++++++++++++++++++++++++++++++-----
>  1 file changed, 50 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c
> index 6d56fa0b9e30..1077036d1ed8 100644
> --- a/drivers/iio/adc/ad7923.c
> +++ b/drivers/iio/adc/ad7923.c
> @@ -1,6 +1,6 @@
>  // SPDX-License-Identifier: GPL-2.0-only
>  /*
> - * AD7904/AD7914/AD7923/AD7924 SPI ADC driver
> + * AD7904/AD7914/AD7923/AD7924/AD7908/AD7918/AD7928 SPI ADC driver
>   *
>   * Copyright 2011 Analog Devices Inc (from AD7923 Driver)
>   * Copyright 2012 CS Systemes d'Information
> @@ -29,11 +29,13 @@
>  #define AD7923_PM_MODE_AS	(1)		/* auto shutdown */
>  #define AD7923_PM_MODE_FS	(2)		/* full shutdown */
>  #define AD7923_PM_MODE_OPS	(3)		/* normal operation */
> -#define AD7923_SEQUENCE_OFF	(0)		/* no sequence fonction
> */
> -#define AD7923_SEQUENCE_PROTECT	(2)		/* no interrupt
> write cycle */
> -#define AD7923_SEQUENCE_ON	(3)		/* continuous sequence */
>  
> -#define AD7923_MAX_CHAN		4
> +#define AD7923_SEQUENCE_OFF	(0x00)		/* no sequence function
> */
> +#define AD7908_SEQUENCE_SHADOW	(0x01)		/* use the shadow
> register
> +						 * for programming
> +						 */
> +#define AD7923_SEQUENCE_PROTECT	(0x10)		/* no interrupt 

These register changes seem extra.
They don't seem to do anything.
I don't mind the change though.


> write cycle */
> +#define AD7923_SEQUENCE_ON	(0x11)		/* continuous sequence */
>  
>  #define AD7923_PM_MODE_WRITE(mode)	((mode) << 4)	 /* write mode */
>  #define AD7923_CHANNEL_WRITE(channel)	((channel) << 6) /* write
> channel */
> @@ -74,6 +76,9 @@ enum ad7923_id {
>  	AD7904,
>  	AD7914,
>  	AD7924,
> +	AD7908,
> +	AD7918,
> +	AD7928
>  };
>  
>  #define AD7923_V_CHAN(index, bits)					\
> @@ -102,9 +107,25 @@ const struct iio_chan_spec name ## _channels[] = { \
>  	IIO_CHAN_SOFT_TIMESTAMP(4), \
>  }
>  
> +#define DECLARE_AD7908_CHANNELS(name, bits) \
> +const struct iio_chan_spec name ## _channels[] = { \
> +	AD7923_V_CHAN(0, bits), \
> +	AD7923_V_CHAN(1, bits), \
> +	AD7923_V_CHAN(2, bits), \
> +	AD7923_V_CHAN(3, bits), \
> +	AD7923_V_CHAN(4, bits), \
> +	AD7923_V_CHAN(5, bits), \
> +	AD7923_V_CHAN(6, bits), \
> +	AD7923_V_CHAN(7, bits), \
> +	IIO_CHAN_SOFT_TIMESTAMP(8), \
> +}
> +
>  static DECLARE_AD7923_CHANNELS(ad7904, 8);
>  static DECLARE_AD7923_CHANNELS(ad7914, 10);
>  static DECLARE_AD7923_CHANNELS(ad7924, 12);
> +static DECLARE_AD7908_CHANNELS(ad7908, 8);
> +static DECLARE_AD7908_CHANNELS(ad7918, 10);
> +static DECLARE_AD7908_CHANNELS(ad7928, 12);
>  
>  static const struct ad7923_chip_info ad7923_chip_info[] = {
>  	[AD7904] = {
> @@ -119,6 +140,18 @@ static const struct ad7923_chip_info
> ad7923_chip_info[] = {
>  		.channels = ad7924_channels,
>  		.num_channels = ARRAY_SIZE(ad7924_channels),
>  	},
> +	[AD7908] = {
> +		.channels = ad7908_channels,
> +		.num_channels = ARRAY_SIZE(ad7908_channels),
> +	},
> +	[AD7918] = {
> +		.channels = ad7918_channels,
> +		.num_channels = ARRAY_SIZE(ad7918_channels),
> +	},
> +	[AD7928] = {
> +		.channels = ad7928_channels,
> +		.num_channels = ARRAY_SIZE(ad7928_channels),
> +	},
>  };
>  
>  /**
> @@ -131,7 +164,11 @@ static int ad7923_update_scan_mode(struct iio_dev
> *indio_dev,
>  	int i, cmd, len;
>  
>  	len = 0;
> -	for_each_set_bit(i, active_scan_mask, AD7923_MAX_CHAN) {
> +	/*
> +	 * For this driver the last channel is always the software
> timestamp so
> +	 * skip that one.
> +	 */
> +	for_each_set_bit(i, active_scan_mask, indio_dev->num_channels - 1)
> {
>  		cmd = AD7923_WRITE_CR | AD7923_CHANNEL_WRITE(i) |
>  			AD7923_SEQUENCE_WRITE(AD7923_SEQUENCE_OFF) |
>  			st->settings;
> @@ -344,6 +381,9 @@ static const struct spi_device_id ad7923_id[] = {
>  	{"ad7914", AD7914},
>  	{"ad7923", AD7924},
>  	{"ad7924", AD7924},
> +	{"ad7908", AD7908},
> +	{"ad7918", AD7918},
> +	{"ad7928", AD7928},
>  	{}
>  };
>  MODULE_DEVICE_TABLE(spi, ad7923_id);
> @@ -353,6 +393,9 @@ static const struct of_device_id ad7923_of_match[] =
> {
>  	{ .compatible = "adi,ad7914", },
>  	{ .compatible = "adi,ad7923", },
>  	{ .compatible = "adi,ad7924", },
> +	{ .compatible = "adi,ad7908", },
> +	{ .compatible = "adi,ad7918", },
> +	{ .compatible = "adi,ad7928", },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, ad7923_of_match);
> @@ -370,5 +413,5 @@ module_spi_driver(ad7923_driver);
>  
>  MODULE_AUTHOR("Michael Hennerich <michael.hennerich@xxxxxxxxxx>");
>  MODULE_AUTHOR("Patrick Vasseur <patrick.vasseur@xxxxxx>");
> -MODULE_DESCRIPTION("Analog Devices AD7904/AD7914/AD7923/AD7924 ADC");
> +MODULE_DESCRIPTION("Analog Devices AD7923 and similar ADC");
>  MODULE_LICENSE("GPL v2");




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux