This switches the qcom-vadc-common to use milli_kelvin_to_millicelsius()
in <linux/units.h>.
Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
Cc: Hartmut Knaack <knaack.h@xxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
---
* v4
- add Reviewed-by tag
drivers/iio/adc/qcom-vadc-common.c | 6 +++---
drivers/iio/adc/qcom-vadc-common.h | 1 -
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/adc/qcom-vadc-common.c b/drivers/iio/adc/qcom-vadc-common.c
index dcd7fb5..2bb78d1 100644
--- a/drivers/iio/adc/qcom-vadc-common.c
+++ b/drivers/iio/adc/qcom-vadc-common.c
@@ -6,6 +6,7 @@
#include <linux/log2.h>
#include <linux/err.h>
#include <linux/module.h>
+#include <linux/units.h>
#include "qcom-vadc-common.h"
@@ -236,8 +237,7 @@ static int qcom_vadc_scale_die_temp(const struct vadc_linear_graph *calib_graph,
voltage = 0;
}
- voltage -= KELVINMIL_CELSIUSMIL;
- *result_mdec = voltage;
+ *result_mdec = milli_kelvin_to_millicelsius(voltage);
return 0;
}
@@ -325,7 +325,7 @@ static int qcom_vadc_scale_hw_calib_die_temp(
{
*result_mdec = qcom_vadc_scale_code_voltage_factor(adc_code,
prescale, data, 2);
- *result_mdec -= KELVINMIL_CELSIUSMIL;
+ *result_mdec = milli_kelvin_to_millicelsius(*result_mdec);
return 0;
}
diff --git a/drivers/iio/adc/qcom-vadc-common.h b/drivers/iio/adc/qcom-vadc-common.h
index bbb1fa0..e074902a 100644
--- a/drivers/iio/adc/qcom-vadc-common.h
+++ b/drivers/iio/adc/qcom-vadc-common.h
@@ -38,7 +38,6 @@
#define VADC_AVG_SAMPLES_MAX 512
#define ADC5_AVG_SAMPLES_MAX 16
-#define KELVINMIL_CELSIUSMIL 273150
#define PMIC5_CHG_TEMP_SCALE_FACTOR 377500
#define PMIC5_SMB_TEMP_CONSTANT 419400
#define PMIC5_SMB_TEMP_SCALE_FACTOR 356
--
2.7.4
