Re: [PATCH 1/2] iio: imu: inv_mpu6050: delete not existing MPU9150 spi support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 15 Nov 2019 15:06:21 +0100
Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx> wrote:

> MPU9150 is i2c only.
> Update Kconfig to delete in description chips that are i2c or
> spi only.
> 
> Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
Good to clean this up.

Applied to the togreg branch of iio.git and pushed out as testing
to be ignored (hopefully)

> ---
>  drivers/iio/imu/inv_mpu6050/Kconfig       | 6 +++---
>  drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 1 -
>  2 files changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
> index e4c4c12236a7..963a0cafe0cb 100644
> --- a/drivers/iio/imu/inv_mpu6050/Kconfig
> +++ b/drivers/iio/imu/inv_mpu6050/Kconfig
> @@ -14,7 +14,7 @@ config INV_MPU6050_I2C
>  	select INV_MPU6050_IIO
>  	select REGMAP_I2C
>  	help
> -	  This driver supports the Invensense MPU6000/6050/6500/6515,
> +	  This driver supports the Invensense MPU6050/6500/6515,
>  	  MPU9150/9250/9255 and ICM20608/20602 motion tracking devices
>  	  over I2C.
>  	  This driver can be built as a module. The module will be called
> @@ -26,8 +26,8 @@ config INV_MPU6050_SPI
>  	select INV_MPU6050_IIO
>  	select REGMAP_SPI
>  	help
> -	  This driver supports the Invensense MPU6000/6050/6500/6515,
> -	  MPU9150/9250/9255 and ICM20608/20602 motion tracking devices
> +	  This driver supports the Invensense MPU6000/6500/6515,
> +	  MPU9250/9255 and ICM20608/20602 motion tracking devices
>  	  over SPI.
>  	  This driver can be built as a module. The module will be called
>  	  inv-mpu6050-spi.
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
> index 142692fc0758..ec102d5a5c77 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
> @@ -74,7 +74,6 @@ static int inv_mpu_probe(struct spi_device *spi)
>  static const struct spi_device_id inv_mpu_id[] = {
>  	{"mpu6000", INV_MPU6000},
>  	{"mpu6500", INV_MPU6500},
> -	{"mpu9150", INV_MPU9150},
>  	{"mpu9250", INV_MPU9250},
>  	{"mpu9255", INV_MPU9255},
>  	{"icm20608", INV_ICM20608},




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux