The previous was mis-formatted, sorry for that. Signed-off-by: Eugene Zaikonnikov <eugene.zaikonnikov@xxxxxxxxxxxxx> diff -uprN linux-5.3.8/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 linux-5.3.8_docs/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 --- linux-5.3.8/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 1970-01-01 01:00:00.000000000 +0100 +++ linux-5.3.8_docs/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 2019-12-02 11:09:25.803326999 +0100 @@ -0,0 +1,9 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw +What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available +KernelVersion: 5.3.8 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Controls the heater device within the humidity sensor to get + rid of excess condensation. + + Valid control values are 0 = OFF, and 1 = ON. diff -uprN linux-5.3.8/Documentation/devicetree/bindings/iio/humidity/hdc2010.yaml linux-5.3.8_docs/Documentation/devicetree/bindings/iio/humidity/hdc2010.yaml --- linux-5.3.8/Documentation/devicetree/bindings/iio/humidity/hdc2010.yaml 1970-01-01 01:00:00.000000000 +0100 +++ linux-5.3.8_docs/Documentation/devicetree/bindings/iio/humidity/hdc2010.yaml 2019-12-02 08:43:32.508277082 +0100 @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/humidity/hdc2010.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HDC2010/HDC2080 humidity and temperature iio sensors + +maintainers: + - Eugene Zaikonnikov <eugene.zaikonnikov@xxxxxxxxxxxxxx> + +description: | + Relative humidity and tempereature sensors on I2C bus + + Datasheets are available at: + http://www.ti.com/product/HDC2010/datasheet + http://www.ti.com/product/HDC2080/datasheet + +properties: + compatible: + enum: + - ti,hdc2010 + - ti,hdc2080 + + interrupts: + description: + interrupt mapping for IRQ + maxItems: 1 + +required: + - compatible + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + hdc200x@40 { + compatible = "ti,hdc2010"; + reg = <0x40>; + }; + };
