Linux IIO Development
[Prev Page][Next Page]
- [PATCH v5 1/2] dt-bindings: iio: adf4350: add clk provider prop
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- Re: [PATCH] iio: dac: adi-axi-dac: improve probe() error messaging
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- [PATCH v5 2/2] iio: frequency: adf4350: add clk provider
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- Re: [PATCH 1/8] dt-bindings: iio: adc: Add AXP717 compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/8] power: supply: axp20x_battery: add support for AXP717
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/8] power: supply: axp20x_usb_power: Add support for AXP717
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] iio: pressure: bmp280: fix bmp580 temp read
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v3 35/41] iio: pressure: bmp280-core: make use of
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v8 3/3] iio: pressure: bmp280: Add triggered buffer support
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v8 1/3] iio: pressure: bmp280: Generalize read_*() functions
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v8 2/3] iio: pressure: bmp280: Add SCALE, RAW values in channels and refactorize them
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v8 0/3] Driver cleanup and triggered buffer support
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH 1/2] drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency
- From: Alexey Makhalov <alexey.makhalov@xxxxxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH 7/8] power: supply: axp20x_battery: add support for AXP717
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH 8/8] arm64: dts: allwinner: h700: Add charger for Anbernic RG35XX
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH 6/8] power: supply: axp20x_usb_power: Add support for AXP717
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH 5/8] iio: adc: axp20x_adc: add support for AXP717 ADC
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH 4/8] mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH 2/8] power: supply: axp20x_usb_power: Add support for AXP717
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH 3/8] power: supply: axp20x_battery: add support for AXP717
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH 1/8] dt-bindings: iio: adc: Add AXP717 compatible
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH 0/8] Add Battery and USB Supply for AXP717
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- Re: [PATCH v2 2/4] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH 2/2] iio: dac: Fix dependencies of AD9739A
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH 1/2] drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency
- From: Alexey Makhalov <alexey.makhalov@xxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: dac: Fix dependencies of AD9739A
- From: Alexey Makhalov <alexey.makhalov@xxxxxxxxxxxx>
- Re: [PATCH] iio: pressure: bmp280: fix bmp580 temp read
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH] iio: trigger: Fix condition for own trigger
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: iio: adc: add ti,ads1119
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH] iio: pressure: bmp280: fix bmp580 temp read
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 4/4] Documentation: iio: Document ad4695 driver
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v2 3/4] iio: adc: ad4695: Add driver for AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v2 2/4] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v2 1/4] dt-bindings: iio: adc: add common-mode-channel dependency
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v2 0/4] iio: adc: ad4695: new driver for AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PULL] IIO: 2nd set of fixes for the 6.10 cycle.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/4] dev_printk: add new dev_err_probe() helpers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/5] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: iio: adc: add ti,ads1119
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v5 3/3] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/2] iio: light: ROHM BH1745 colour sensor
- From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
- Re: [PATCH v4 2/2] iio: light: ROHM BH1745 colour sensor
- From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
- [PATCH v3 2/2] iio: adc: ti-ads1119: Add driver
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- [PATCH v3 0/2] iio: adc: ti-ads1119: Add driver
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: iio: adc: add ti,ads1119
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [PULL] IIO: 2nd set of fixes for the 6.10 cycle.
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PULL] IIO: 2nd set of fixes for the 6.10 cycle.
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7 0/9] Add support for AD411x
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PULL] IIO: 2nd set of fixes for the 6.10 cycle.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] iio: dac: adi-axi-dac: improve probe() error messaging
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- Re: [PATCH v2 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v3 22/41] iio: gyro: mpu3050-core: make use of regmap_clear_bits(), regmap_set_bits()
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v3 00/41] iio: simplify with regmap_set_bits(), regmap_clear_bits()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH v2 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- [PATCH v3 39/41] iio: proximity: sx_common: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 27/41] iio: imu: inv_icm42600: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- Re: [PATCH v5 2/3] dt-bindings:iio:proximity: Add hx9023s binding
- From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
- Re: [PATCH v3 19/41] iio: dac: ltc2688: make use of regmap_set_bits()
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 04/41] iio: adc: ad4130: make use of regmap_clear_bits()
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- [PATCH v3 25/41] iio: health: max30100: make use of regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 41/41] iio: trigger: stm32-timer-trigger: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 40/41] iio: temperature: mlx90632: make use of regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 38/41] iio: proximity: sx9500: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 37/41] iio: proximity: sx9360: make use of regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 36/41] iio: proximity: sx9324: make use of regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 35/41] iio: pressure: bmp280-core: make use of regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 34/41] iio: magnetometer: mmc35240: make use of regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 33/41] iio: magnetometer: ak8974: make use of regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 32/41] iio: light: veml6030: make use of regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 31/41] iio: light: st_uvis25_core: make use of regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 30/41] iio: light: isl29018: make use of regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 29/41] iio: light: iqs621-als: make use of regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 28/41] iio: light: adux1020: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 26/41] iio: health: max30102: make use of regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 24/41] iio: health: afe4404: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 23/41] iio: health: afe4403: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 22/41] iio: gyro: mpu3050-core: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 21/41] iio: gyro: bmg160_core: make use of regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 20/41] iio: dac: stm32-dac-core: make use of regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 19/41] iio: dac: ltc2688: make use of regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 18/41] iio: adc: stm32-dfsdm-adc: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 17/41] iio: adc: sc27xx_adc: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 16/41] iio: adc: rn5t618-adc: make use of regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 15/41] iio: adc: qcom-spmi-rradc: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 14/41] iio: adc: mp2629_adc: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 13/41] iio: adc: meson_saradc: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 12/41] iio: adc: intel_mrfld_adc: make use of regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 11/41] iio: adc: ina2xx-adc: make use of regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 10/41] iio: adc: fsl-imx25-gcq: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 09/41] iio: adc: cpcap-adc: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 08/41] iio: adc: berlin2-adc: make use of regmap_clear_bits(), regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 07/41] iio: adc: bcm_iproc_adc: make use of regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 06/41] iio: adc: axp288_adc: make use of regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 05/41] iio: adc: axp20x_adc: make use of regmap_set_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 04/41] iio: adc: ad4130: make use of regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 03/41] iio: accel: msa311: make use of regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 02/41] iio: accel: kxsd9: Make use of regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 01/41] iio: accel: fxls8962af-core: Make use of regmap_set_bits(), regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 00/41] iio: simplify with regmap_set_bits(), regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- Re: [PATCH v2 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 1/2] drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency
- From: Zack Rusin <zack.rusin@xxxxxxxxxxxx>
- Re: [PATCH v2 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- Re: [PATCH v2 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH] counter: ti-eqep: enable clock at probe
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: drop stale Anson Huang from maintainers
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v5 3/3] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2] dt-bindings: drop stale Anson Huang from maintainers
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH 1/2] drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH v2 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- Re: [PATCH 1/2] drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH 2/2] iio: dac: Fix dependencies of AD9739A
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH v4 2/2] iio: light: ROHM BH1745 colour sensor
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH v2] dt-bindings: drop stale Anson Huang from maintainers
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v10 3/6] iio: core: Add new DMABUF interface infrastructure
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- Re: [PATCH RFC 0/3] iio: add helpers and accessors for active channels and masklength
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v10 3/6] iio: core: Add new DMABUF interface infrastructure
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH] iio: trigger: Fix condition for own trigger
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/2] bu27034: ROHM BU27034NUC to BU27034ANUC
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- Re: [PATCH 2/2] iio: bu27034: Add a read only HWARDWAREGAIN
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- Re: [PATCH 3/4] mfd: stm32-timers: Drop TIM_DIER_CC_IE(x) in favour of TIM_DIER_CCxIE(x)
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PULL] IIO: 2nd set of fixes for the 6.10 cycle.
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: trigger: Fix condition for own trigger
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [PATCH] counter: ti-eqep: enable clock at probe
- From: William Breathitt Gray <wbg@xxxxxxxxxx>
- Re: [PATCH 3/4] mfd: stm32-timers: Drop TIM_DIER_CC_IE(x) in favour of TIM_DIER_CCxIE(x)
- From: William Breathitt Gray <wbg@xxxxxxxxxx>
- Re: [PATCH v5 2/3] dt-bindings:iio:proximity: Add hx9023s binding
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 0/2] counter: ti-eqep: small cleanups
- From: William Breathitt Gray <wbg@xxxxxxxxxx>
- Re: [PATCH] counter: ti-eqep: implement over/underflow events
- From: William Breathitt Gray <wbg@xxxxxxxxxx>
- Re: [PATCH v1 2/2] dt-bindings:iio:proximity: Add hx9031as binding
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 0/2] iio-proximity-hx9023s-Add-TYHX-HX9023S-sensor-driver
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 1/3] dt-bindings:iio:proximity:new vendor prefix: tyhx
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 2/3] dt-bindings:iio:proximity: Add hx9023s binding
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v5 3/3] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
- From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
- [PATCH v5 2/3] dt-bindings:iio:proximity: Add hx9023s binding
- From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
- [PATCH v5 1/3] dt-bindings:iio:proximity:new vendor prefix: tyhx
- From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
- [PATCH v5 0/3] Add TYHX HX9023S sensor driver
- From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
- [PATCH 2/2] iio: dac: Fix dependencies of AD9739A
- From: Alexey Makhalov <alexey.makhalov@xxxxxxxxxxxx>
- [PATCH 1/2] drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency
- From: Alexey Makhalov <alexey.makhalov@xxxxxxxxxxxx>
- Re: [PATCH v4 2/2] iio: light: ROHM BH1745 colour sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/2] dt-bindings: iio: st-sensors: add LIS2DS12 accelerometer
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: bu27034: Add a read only HWARDWAREGAIN
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] bu27034: ROHM BU27034NUC to BU27034ANUC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] counter: ti-eqep: implement over/underflow events
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v4 2/2] dt-bindings: iio: st-sensors: add LIS2DS12 accelerometer
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/2] iio: frequency: adf4350: add clk provider
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH RFC 0/3] iio: add helpers and accessors for active channels and masklength
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/3] Documentation: iio: Document ad4695 driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: ad4695: Add driver for AD4695 and similar ADCs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 5/5] iio: adc: ad7944: use devm_regulator_get_enable_read_voltage
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 4/5] iio: adc: ad7793: use devm_regulator_get_enable_read_voltage
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/5] iio: adc: ad7292: use devm_regulator_get_enable_read_voltage
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/5] iio: adc: ad7266: use devm_regulator_get_enable_read_voltage
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/2] dt-bindings: iio: st-sensors: add LIS2DS12 accelerometer
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v10 3/6] iio: core: Add new DMABUF interface infrastructure
- From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/5] dt-bindings: iio: adc: ad7192: Update clock config
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 1/5] iio: adc: ad7192: Clean up dev
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 3/3] iio: adc: ad7266: Fix codestyle error
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/3] iio: adc: ad7266: Use iio_device_claim_direct_scoped()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/3] iio: adc: ad7266: Fix variable checking bug
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: trigger: Fix condition for own trigger
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: adi-axi-adc: improve probe() error messaging
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PULL] IIO: First set of new device support, features and cleanup for 6.11
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/2] dt-bindings: iio: st-sensors: add LIS2DS12 accelerometer
- From: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
- [PULL] IIO: 2nd set of fixes for the 6.10 cycle.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] counter: ti-eqep: implement over/underflow events
- From: William Breathitt Gray <wbg@xxxxxxxxxx>
- Re: [PATCH] iio: adc: adi-axi-adc: improve probe() error messaging
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 3/5] iio: adc: ad7292: use devm_regulator_get_enable_read_voltage
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v4 2/2] iio: frequency: adf4350: add clk provider
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 5/5] iio: adc: ad7944: use devm_regulator_get_enable_read_voltage
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v2 0/5] iio: adc: use devm_regulator_get_enable_read_voltage round 1
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 5/5] iio: adc: ad7944: use devm_regulator_get_enable_read_voltage
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 3/5] iio: adc: ad7292: use devm_regulator_get_enable_read_voltage
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- [PATCH] iio: trigger: Fix condition for own trigger
- From: João Paulo Gonçalves <jpaulo.silvagoncalves@xxxxxxxxx>
- Re: [PATCH v4 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
- From: Peng Fan <peng.fan@xxxxxxx>
- Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH] dt-bindings: drop stale Anson Huang from maintainers
- From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
- [PATCH] dt-bindings: drop stale Anson Huang from maintainers
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 3/4] mfd: stm32-timers: Drop TIM_DIER_CC_IE(x) in favour of TIM_DIER_CCxIE(x)
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH] iio: adc: adi-axi-adc: improve probe() error messaging
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- [PATCH 4/4] pwm-stm32: Make use of parametrised register definitions
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH 3/4] mfd: stm32-timers: Drop TIM_DIER_CC_IE(x) in favour of TIM_DIER_CCxIE(x)
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH 1/4] mfd: stm32-timers: Unify alignment of register definition
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH 2/4] mfd: stm32-timers: Add some register definitions with a parameter
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH 0/4] mfd: stm32-timers: Make register definition more flexible
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v7 0/9] Add support for AD411x
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 0/2] iio: imu: inv_icm42600: add support of accel low power
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RESEND][PATCH] iio: simplify with regmap_set_bits(), regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- Re: [RESEND][PATCH] iio: simplify with regmap_set_bits(), regmap_clear_bits()
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v3 1/5] iio: ABI: Generalize ABI documentation for DAC
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 0/6] minor fixes and improvements
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v4 4/5] dt-bindings: iio: adc: ad7192: Add clock provider
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v4 2/5] dt-bindings: iio: adc: ad7192: Update clock config
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH] iio: adc: adi-axi-adc: improve probe() error messaging
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v3 3/3] iio: adc: ad7266: Fix codestyle error
- From: Fernando Yang <hagisf@xxxxxx>
- [PATCH v3 2/3] iio: adc: ad7266: Use iio_device_claim_direct_scoped()
- From: Fernando Yang <hagisf@xxxxxx>
- [PATCH v3 1/3] iio: adc: ad7266: Fix variable checking bug
- From: Fernando Yang <hagisf@xxxxxx>
- [PATCH v3 0/3] iio: adc: ad7266: Use iio_device_claim_direct_scoped() and clean some codestyle error
- From: Fernando Yang <hagisf@xxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v2] iio: simplify with regmap_set_bits(), regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- [PATCH v4 5/5] iio: adc: ad7192: Add clock provider
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- [PATCH v4 4/5] dt-bindings: iio: adc: ad7192: Add clock provider
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- [PATCH v4 3/5] iio: adc: ad7192: Update clock config
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- [PATCH v4 2/5] dt-bindings: iio: adc: ad7192: Update clock config
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- [PATCH v4 1/5] iio: adc: ad7192: Clean up dev
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- [PATCH v4 0/5] iio: adc: ad7192: Improvements
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- Re: [RESEND][PATCH] iio: simplify with regmap_set_bits(), regmap_clear_bits()
- From: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v2 5/5] iio: adc: ad7944: use devm_regulator_get_enable_read_voltage
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v2 2/5] iio: adc: ad7266: use devm_regulator_get_enable_read_voltage
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v2 3/5] iio: adc: ad7292: use devm_regulator_get_enable_read_voltage
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v2 4/5] iio: adc: ad7793: use devm_regulator_get_enable_read_voltage
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v2 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v2 0/5] iio: adc: use devm_regulator_get_enable_read_voltage round 1
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: ad4695: Add driver for AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH 2/3] iio: adc: ad4695: Add driver for AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH 3/3] Documentation: iio: Document ad4695 driver
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH 0/3] iio: adc: ad4695: new driver for AD4695 and similar ADCs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: (subset) [PATCH v6 0/7] arm64: dts: add description for solidrun cn9130 som and clearfog boards
- From: Vinod Koul <vkoul@xxxxxxxxxx>
- Re: [PATCH v2 0/6] minor fixes and improvements
- From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: iio: adc: ad7192: Fix clock config
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 2/2] iio: adc: ad7192: Fix clock config
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- [PATCH RFC 0/3] iio: add helpers and accessors for active channels and masklength
- From: Nuno Sa <nuno.sa@xxxxxxxxxx>
- [PATCH RFC 1/3] iio: core: add new helper to iterate active channels
- From: Nuno Sa <nuno.sa@xxxxxxxxxx>
- [PATCH RFC 3/3] iio: core annotate masklength as private
- From: Nuno Sa <nuno.sa@xxxxxxxxxx>
- [PATCH RFC 2/3] iio: imu: adis16475: make use of iio_for_each_active_channel()
- From: Nuno Sa <nuno.sa@xxxxxxxxxx>
- [PATCH v3 2/2] iio: adc: ad7192: Fix clock config
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: iio: adc: ad7192: Fix clock config
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- [PATCH v3 0/2] iio: adc: ad7192: Fix clock config
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- [PATCH v5 2/8] counter/ti-eqep: Add new ti-am62-eqep compatible
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v5 7/8] arm64: dts: ti: k3-am64x-sk: Enable eQEP
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v5 1/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v5 0/8] Enable eQEP DT support for Sitara K3 platforms
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v5 6/8] arm64: dts: ti: k3-am64-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v5 4/8] arm64: dts: ti: k3-am62a-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v5 5/8] arm64: dts: ti: k3-am62p-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v5 3/8] arm64: dts: ti: k3-am62-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v5 8/8] counter: ti-eqep: Allow eQEP driver to be built for K3 devices
- From: Judith Mendez <jm@xxxxxx>
- Re: inv_icm42600: icm42670
- From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
- [PATCH v4 2/2] iio: frequency: adf4350: add clk provider
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH v4 1/2] dt-bindings: iio: adf4350: add clk provider prop
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- Re: [PATCH v4 0/2] iio: imu: inv_icm42600: add support of accel low power
- From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
- Re: [PATCH v3 2/2] iio: frequency: adf4350: add clk provider
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 2/2] iio: frequency: adf4350: add clk provider
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- RE: [PATCH v3 1/5] iio: ABI: Generalize ABI documentation for DAC
- From: "Paller, Kim Seer" <KimSeer.Paller@xxxxxxxxxx>
- [PATCH v3 2/2] iio: frequency: adf4350: add clk provider
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: iio: adf4350: add clk provider prop
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- Re: [RESEND][PATCH] iio: simplify with regmap_set_bits(), regmap_clear_bits()
- From: Crt Mori <cmo@xxxxxxxxxxx>
- inv_icm42600: icm42670
- From: Sean Nyekjaer <sean@xxxxxxxxxx>
- Re: [RESEND][PATCH] iio: simplify with regmap_set_bits(), regmap_clear_bits()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH v4 2/2] iio: light: ROHM BH1745 colour sensor
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- Re: [PATCH v4 2/2] dt-bindings: iio: st-sensors: add LIS2DS12 accelerometer
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: adc: ti-ads1119: Add driver
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: adc: ti-ads1119: Add driver
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v4 2/2] iio: light: ROHM BH1745 colour sensor
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v3 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v3 6/6] iio: adc: Add support for AD4000
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 2/3] iio: pressure: Add driver for Sensirion SDP500
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- [RESEND][PATCH] iio: simplify with regmap_set_bits(), regmap_clear_bits()
- From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
- Re: [PATCH v10 1/6] dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()
- From: Vinod Koul <vkoul@xxxxxxxxxx>
- [PATCH v4 2/2] dt-bindings: iio: st-sensors: add LIS2DS12 accelerometer
- From: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
- [PATCH v4 1/2] iio: accel: st_accel: add support for LIS2DS12
- From: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
- Re: [PATCH v4 1/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: Judith Mendez <jm@xxxxxx>
- Re: [PATCH v3 6/6] iio: adc: Add support for AD4000
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v4 1/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v4 1/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: Judith Mendez <jm@xxxxxx>
- Re: [PATCH v6 4/7] dt-bindings: phy: armada-cp110-utmi: add optional swap-dx-lanes property
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v3] iio: accel: st_accel: add LIS2DS12
- From: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
- Re: [PATCH] iio: dac: fix ad9739a random config compile error
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v4 1/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v4 3/8] arm64: dts: ti: k3-am62-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v4 2/8] counter/ti-eqep: Add new ti-am62-eqep compatible
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v4 0/8] Enable eQEP DT support for Sitara K3 platforms
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v4 5/8] arm64: dts: ti: k3-am62p-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v4 6/8] arm64: dts: ti: k3-am64-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v4 8/8] counter: ti-eqep: Allow eQEP driver to be built for K3 devices
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v4 7/8] arm64: dts: ti: k3-am64x-sk: Enable eQEP
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v4 1/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v4 4/8] arm64: dts: ti: k3-am62a-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- Re: [PATCH v7 5/9] iio: adc: ad7173: refactor ain and vref selection
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH] counter: ti-eqep: enable clock at probe
- From: Judith Mendez <jm@xxxxxx>
- Re: [PATCH] counter: ti-eqep: enable clock at probe
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v3 0/8] Enable eQEP DT support for Sitara K3 platforms
- From: Judith Mendez <jm@xxxxxx>
- Re: [PATCH 1/2] counter: ti-eqep: remove unused struct member
- From: Judith Mendez <jm@xxxxxx>
- Re: [PATCH] counter: ti-eqep: enable clock at probe
- From: Judith Mendez <jm@xxxxxx>
- Re: [PATCH v7 0/9] Add support for AD411x
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: bu27034: Add a read only HWARDWAREGAIN
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 2/2] iio: adc: ti-ads1119: Add driver
- From: João Paulo Gonçalves <jpaulo.silvagoncalves@xxxxxxxxx>
- Re: [PATCH 2/2] iio: bu27034: Add a read only HWARDWAREGAIN
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 2/2] iio: adc: ti-ads1119: Add driver
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- [PATCH 2/2] iio: bu27034: Add a read only HWARDWAREGAIN
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH 1/2] bu27034: ROHM BU27034NUC to BU27034ANUC
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH 0/2] ROHM BU27034NUC to ROHM BU27034ANUC
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- RE: [PATCH v2 2/2] iio: frequency: adf4350: add clk provider
- From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
- Re: [PATCH v2 2/3] iio: pressure: Add driver for Sensirion SDP500
- From: Petar Stoykov <pd.pstoykov@xxxxxxxxx>
- Re: [PATCH v2 1/5] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings:iio:proximity: Add hx9023s binding
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v7 9/9] iio: adc: ad7173: Add support for AD411x devices
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v7 6/9] iio: adc: ad7173: add support for special inputs
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v7 5/9] iio: adc: ad7173: refactor ain and vref selection
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v4 2/2] iio: light: ROHM BH1745 colour sensor
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [PATCH v3 15/15] iio: chemical: bme680: Refactorize reading functions
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 14/15] iio: chemical: bme680: Move forced mode setup in ->read_raw()
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 13/15] iio: chemical: bme680: Remove redundant gas configuration
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 12/15] iio: chemical: bme680: Move probe errors to dev_err_probe()
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 11/15] iio: chemical: bme680: Modify startup procedure
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 10/15] iio: chemical: bme680: Make error checks consistent
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 09/15] iio: chemical: bme680: Add read buffers in read/write buffer union
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 08/15] iio: chemical: bme680: Allocate IIO device before chip initialization
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 07/15] iio: chemical: bme680: Use bulk reads for calibration data
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 06/15] iio: chemical: bme680: Remove duplicate register read
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 05/15] iio: chemical: bme680: Sort headers alphabetically
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 04/15] iio: chemical: bme680: Remove remaining ACPI-only stuff
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 03/15] iio: chemical: bme680: Drop unnecessary casts and correct adc data types
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 02/15] iio: chemical: bme680: Fix typo in define
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 01/15] iio: chemical: bme680: Fix read/write ops to device by adding mutexes
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v3 00/15] iio: chemical: bme680: Driver cleanup
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v2 19/19] iio: chemical: bme680: Refactorize reading functions
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH] counter: ti-eqep: implement over/underflow events
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH] counter: ti-eqep: enable clock at probe
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH 2/2] counter: ti-eqep: remove counter_priv() wrapper
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH 1/2] counter: ti-eqep: remove unused struct member
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH 0/2] counter: ti-eqep: small cleanups
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v3 0/6] Add driver for ENS160 sensor
- From: Gustavo Silva <gustavograzs@xxxxxxxxx>
- Re: [PATCH v3] iio: humidity: hdc3020: fix hysteresis representation
- From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
- Re: [PATCH v2 19/19] iio: chemical: bme680: Refactorize reading functions
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 17/19] iio: chemical: bme680: Remove redundant gas configuration
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 15/19] iio: chemical: bme680: Modify startup procedure
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 04/19] iio: chemical: bme680: Fix sensor data read operation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 03/19] iio: chemical: bme680: Fix overflows in compensate() functions
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 02/19] iio: chemical: bme680: Fix calibration data variable
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 01/19] iio: chemical: bme680: Fix pressure value output
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 06/19] iio: chemical: bme680: Fix read/write ops to device by adding mutexes
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: adc: ti-ads1119: Add driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: dac: fix ad9739a random config compile error
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: iio: adc: add ti,ads1119
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 0/2] iio: imu: inv_icm42600: add support of accel low power
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3] iio: humidity: hdc3020: fix hysteresis representation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v10 0/6] iio: new DMABUF based API v10
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v10 4/6] iio: buffer-dma: Enable support for DMABUFs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v10 3/6] iio: core: Add new DMABUF interface infrastructure
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 0/6] Add driver for ENS160 sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 3/6] iio: chemical: add driver for ENS160 sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 6/6] iio: adc: Add support for AD4000
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5] iio: temperature: mcp9600: add threshold events support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [EXTERNAL]Re: [PATCH v4 2/2] dt-bindings: iio: light: add VEML6040 RGBW-LS bindings
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] iio: dac: fix ad9739a random config compile error
- From: Ke Sun <sunke@xxxxxxxxxx>
- Re: iio: iio-trig-hrtimer bug on suspend/resume when used with bmi160 and bmi323
- From: Denis Benato <benato.denis96@xxxxxxxxx>
- Re: [PATCH v10 6/6] Documentation: iio: Document high-speed DMABUF based API
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
- Re: [PATCH v3 1/4] dev_printk: add new dev_err_probe() helpers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: iio: adc: amlogic,meson-saradc: add optional power-domains
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/3] iio: adc: ad7192: Fix clock config
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 4/5] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: dac: adi-axi-dac: add platform dependencies
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: adi-axi-adc: add platform dependencies
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: amlogic,meson-saradc: add GXLX SoC compatible
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: meson: add support for the GXLX SoC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: imu: inv_icm42600: add register caching in the regmap
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 0/8] iio: simplify with spi_get_device_match_data()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] staging: iio: Drop explicit initialization of struct i2c_device_id::driver_data to 0
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/8] iio: accel: adxl313: simplify with spi_get_device_match_data()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: humidity: si7020: add heater support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings:iio:proximity: Add hx9023s binding
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings:iio:proximity: Add hx9023s binding
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 0/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: add missing MODULE_DESCRIPTION() macros
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v7 0/9] Add support for AD411x
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/2] iio: light: ROHM BH1745 colour sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: iio: light: ROHM BH1745
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/3] iio: light: ROHM BH1745 colour sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: frequency: adf4350: add clk provider
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: frequency: adf4350: add clk provider
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/3] iio: adc: ad7266: Fix variable checking bug
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/5] iio: ABI: Generalize ABI documentation for DAC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: event: use sizeof(*pointer) instead of sizeof(type)
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/3] iio: adc: ad7266: Fix variable checking bug
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: xilinx-ams: Don't include ams_ctrl_channels in scan_mask
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 0/8] Enable eQEP DT support for Sitara K3 platforms
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: iio: iio-trig-hrtimer bug on suspend/resume when used with bmi160 and bmi323
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 6/6] docs: iio: add documentation for adis16480 driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH v6 09/13] iio: adc: axp20x_adc: Add support for AXP192
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 0/13] Add support for AXP192 PMIC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/3] iio: adc: ad7266: Fix codestyle error
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- Re: [PATCH v2 2/3] iio: adc: ad7266: Use iio_device_claim_direct_scoped()
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- Re: [PATCH v2 1/3] iio: adc: ad7266: Fix variable checking bug
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- Re: [PATCH 3/5] iio: adc: ad7292: use devm_regulator_get_enable_read_voltage
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- Re: [PATCH v4 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: iio: iio-trig-hrtimer bug on suspend/resume when used with bmi160 and bmi323
- From: Denis Benato <benato.denis96@xxxxxxxxx>
- Re: [PATCH v4 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v4 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PULL] IIO: First round fixes for IIO in the 6.10 cycle
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: xilinx-ams: Don't include ams_ctrl_channels in scan_mask
- From: Sean Anderson <sean.anderson@xxxxxxxxx>
- [PATCH v3 3/8] arm64: dts: ti: k3-am62-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v3 8/8] counter: ti-eqep: Allow eQEP driver to be built for K3 devices
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v3 0/8] Enable eQEP DT support for Sitara K3 platforms
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v3 1/8] dt-bindings: counter: Add new ti,am62-eqep compatible
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v3 5/8] arm64: dts: ti: k3-am62p-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v3 2/8] counter/ti-eqep: Add new ti-am62-eqep compatible
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v3 7/8] arm64: dts: ti: k3-am64x-sk: Enable eQEP
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v3 4/8] arm64: dts: ti: k3-am62a-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH v3 6/8] arm64: dts: ti: k3-am64-main: Add eQEP nodes
- From: Judith Mendez <jm@xxxxxx>
- [PATCH] iio: add missing MODULE_DESCRIPTION() macros
- From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
- Re: [PATCH v2 13/19] iio: chemical: bme680: Add read buffers in union
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v2 13/19] iio: chemical: bme680: Add read buffers in DMA safe region
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v1 07/17] misc: eeprom: at25: Change nvmem reg_read/write return type
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- Re: [PATCH v6 0/13] Add support for AXP192 PMIC
- From: Alex Bee <knaerzche@xxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- [PATCH v7 9/9] iio: adc: ad7173: Add support for AD411x devices
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v7 6/9] iio: adc: ad7173: add support for special inputs
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v7 8/9] iio: adc: ad7173: document sampling frequency behaviour
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v7 5/9] iio: adc: ad7173: refactor ain and vref selection
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v7 7/9] iio: adc: ad7173: refactor device info structs
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v7 3/9] iio: adc: ad_sigma_delta: add disable_one callback
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v7 4/9] iio: adc: ad7173: refactor channel configuration parsing
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v7 2/9] dt-bindings: adc: ad7173: add support for ad411x
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v7 0/9] Add support for AD411x
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v7 1/9] dt-bindings: iio: adc: Add common-mode-channel property
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- Re: [PATCH v3 5/6] dt-bindings: iio: adc: Add AD4000
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v6 3/7] dt-bindings: iio: adc: ti,ads1015: add compatible for tla2021
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- Re: [PATCH v3 5/6] dt-bindings: iio: adc: Add AD4000
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- Re: [PATCH v2 2/6] iio: light: stk3310: Implement vdd supply and power it off during suspend
- From: Aren <aren@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] iio: humidity: si7020: add heater support
- From: Antoni Pokusinski <apokusinski01@xxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v4 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
- From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
- [PATCH v4 1/2] dt-bindings:iio:proximity: Add hx9023s binding
- From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
- [PATCH v4 0/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
- From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: frequency: adf4350: add clk provider
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- [PATCH v2] iio: humidity: si7020: add heater support
- From: Antoni Pokusinski <apokusinski01@xxxxxxxxx>
- Re: [PATCH v3 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v6 9/9] iio: adc: ad7173: Add support for AD411x devices
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v6 6/9] iio: adc: ad7173: add support for special inputs
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v6 5/9] iio: adc: ad7173: refactor ain and vref selection
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- [PATCH v2 2/2] iio: frequency: adf4350: add clk provider
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- Re: [PATCH v6 3/9] iio: adc: ad_sigma_delta: add disable_one callback
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: iio: adf4350: add clk provider prop
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- Re: [PATCH v6 9/9] iio: adc: ad7173: Add support for AD411x devices
- From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
- Re: [PATCH v6 5/9] iio: adc: ad7173: refactor ain and vref selection
- From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
- Re: [PATCH v6 6/9] iio: adc: ad7173: add support for special inputs
- From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
- Re: [PATCH v6 3/9] iio: adc: ad_sigma_delta: add disable_one callback
- From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
- Re: [PATCH] staging: iio: Drop explicit initialization of struct i2c_device_id::driver_data to 0
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH 1/8] iio: accel: adxl313: simplify with spi_get_device_match_data()
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v6 9/9] iio: adc: ad7173: Add support for AD411x devices
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v6 8/9] iio: adc: ad7173: document sampling frequency behaviour
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v6 7/9] iio: adc: ad7173: refactor device info structs
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v6 6/9] iio: adc: ad7173: add support for special inputs
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v6 5/9] iio: adc: ad7173: refactor ain and vref selection
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v6 3/9] iio: adc: ad_sigma_delta: add disable_one callback
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH 1/8] iio: accel: adxl313: simplify with spi_get_device_match_data()
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH 0/8] iio: simplify with spi_get_device_match_data()
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- [PATCH] iio: imu: inv_icm42600: add register caching in the regmap
- From: inv.git-commit@xxxxxxx
- Re: [PATCH v10 6/6] Documentation: iio: Document high-speed DMABUF based API
- From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: adc: ad7173: add support for ad411x
- From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
- Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: iio: adc: add ti,ads1119
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- [PATCH v2 19/19] iio: chemical: bme680: Refactorize reading functions
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 18/19] iio: chemical: bme680: Move forced mode setup in ->read_raw()
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 17/19] iio: chemical: bme680: Remove redundant gas configuration
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 16/19] iio: chemical: bme680: Move probe errors to dev_err_probe()
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 15/19] iio: chemical: bme680: Modify startup procedure
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 14/19] iio: chemical: bme680: Make error checks consistent
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 13/19] iio: chemical: bme680: Add read buffers in union
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 13/19] iio: chemical: bme680: Add read buffers in read/write buffer union
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 13/19] iio: chemical: bme680: Add read buffers in DMA safe region
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 08/19] iio: chemical: bme680: Remove remaining ACPI-only stuff
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 12/19] iio: chemical: bme680: Allocate IIO device before chip initialization
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 11/19] iio: chemical: bme680: Use bulk reads for calibration data
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 10/19] iio: chemical: bme680: Remove duplicate register read
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 09/19] iio: chemical: bme680: Sort headers alphabetically
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 07/19] iio: chemical: bme680: Drop unnecessary casts and correct adc data types
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 06/19] iio: chemical: bme680: Fix read/write ops to device by adding mutexes
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 05/19] iio: chemical: bme680: Fix typo in define
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 04/19] iio: chemical: bme680: Fix sensor data read operation
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 03/19] iio: chemical: bme680: Fix overflows in compensate() functions
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 02/19] iio: chemical: bme680: Fix calibration data variable
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 01/19] iio: chemical: bme680: Fix pressure value output
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- [PATCH v2 00/19] iio: chemical: bme680: Driver fixes and cleanup
- From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: iio: adc: add ti,ads1119
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v6 3/7] dt-bindings: iio: adc: ti,ads1015: add compatible for tla2021
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- Re: [PATCH v3] iio: accel: st_accel: add LIS2DS12
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: adc: ad7173: add support for ad411x
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- Re: [PATCH v1 2/4] iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 1/4] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: humidity: si7020: add heater support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 11/17] iio: chemical: bme680: Use bulk reads for calibration data
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v10 6/6] Documentation: iio: Document high-speed DMABUF based API
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: iio: adc: add ti,ads1119
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v6 2/9] dt-bindings: adc: ad7173: add support for ad411x
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: iio: adc: add ti,ads1119
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- [PATCH v2 2/2] iio: adc: ti-ads1119: Add driver
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- [PATCH v2 0/2] iio: adc: ti-ads1119: Add driver
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- [PATCH v4 2/2] iio: light: ROHM BH1745 colour sensor
- From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
- [PATCH v4 1/2] dt-bindings: iio: light: ROHM BH1745
- From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
- [PATCH v6 6/9] iio: adc: ad7173: add support for special inputs
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v6 1/9] dt-bindings: iio: adc: Add common-mode-channel property
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: iio: adc: amlogic,meson-saradc: add optional power-domains
- From: Conor Dooley <conor@xxxxxxxxxx>
- RE: [PATCH v3 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
- From: "Paller, Kim Seer" <KimSeer.Paller@xxxxxxxxxx>
- [PATCH v6 7/9] iio: adc: ad7173: refactor device info structs
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v6 9/9] iio: adc: ad7173: Add support for AD411x devices
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v6 8/9] iio: adc: ad7173: document sampling frequency behaviour
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v6 3/9] iio: adc: ad_sigma_delta: add disable_one callback
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v6 4/9] iio: adc: ad7173: refactor channel configuration parsing
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v6 5/9] iio: adc: ad7173: refactor ain and vref selection
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v6 2/9] dt-bindings: adc: ad7173: add support for ad411x
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH v6 0/9] Add support for AD411x
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH] staging: iio: Drop explicit initialization of struct i2c_device_id::driver_data to 0
- From: "Uwe Kleine-König" <ukleinek@xxxxxxxxxxxx>
- Re: [PATCH V2 0/4] Add GPADC for Allwinner H616
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH v3] iio: humidity: hdc3020: fix hysteresis representation
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH 8/8] iio: adc: mcp3564: drop redundant open-coded spi_get_device_match_data()
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 7/8] iio: dac: max5522: simplify with spi_get_device_match_data()
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 6/8] iio: addac: ad74413r: simplify with spi_get_device_match_data()
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 5/8] iio: adc: ti-tsc2046: simplify with spi_get_device_match_data()
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 4/8] iio: adc: ti-ads131e08: simplify with spi_get_device_match_data()
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 3/8] iio: adc: max11205: simplify with spi_get_device_match_data()
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 2/8] iio: accel: adxl355: simplify with spi_get_device_match_data()
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 1/8] iio: accel: adxl313: simplify with spi_get_device_match_data()
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH 0/8] iio: simplify with spi_get_device_match_data()
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 2/2] iio: light: ROHM BH1745 colour sensor
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH v3 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v3 2/2] iio: light: ROHM BH1745 colour sensor
- From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: iio: light: ROHM BH1745
- From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
- Re: [PATCH v3 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v1 07/17] misc: eeprom: at25: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- Re: [PATCH v3 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 06/17] misc: eeprom: at24: Change nvmem reg_read/write return type
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v3] iio: accel: st_accel: add LIS2DS12
- From: kauschluss <kauschluss@xxxxxxxxxxx>
- Re: [PATCH v1 07/17] misc: eeprom: at25: Change nvmem reg_read/write return type
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v1 07/17] misc: eeprom: at25: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- Re: [PATCH v1 05/17] misc: ds1682: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- Re: [PATCH v1 01/17] hwmon: pmbus: adm1266: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- Re: [PATCH v1 07/17] misc: eeprom: at25: Change nvmem reg_read/write return type
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: iio: adc: amlogic,meson-saradc: add optional power-domains
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v1 01/17] hwmon: pmbus: adm1266: Change nvmem reg_read/write return type
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [PATCH v3 2/4] iio: temperature: ltc2983: convert to dev_err_probe()
- From: Nuno Sa <nuno.sa@xxxxxxxxxx>
- [PATCH v3 4/4] iio: common: scmi_iio: convert to dev_err_probe()
- From: Nuno Sa <nuno.sa@xxxxxxxxxx>
- [PATCH v3 1/4] dev_printk: add new dev_err_probe() helpers
- From: Nuno Sa <nuno.sa@xxxxxxxxxx>
- [PATCH v3 3/4] iio: backend: make use of dev_err_cast_probe()
- From: Nuno Sa <nuno.sa@xxxxxxxxxx>
- [PATCH v3 0/4] dev_printk: add dev_errp_probe() helper
- From: Nuno Sa <nuno.sa@xxxxxxxxxx>
- Re: [PATCH] iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF
- From: Sean Nyekjaer <sean@xxxxxxxxxx>
- Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 1/5] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 6/6] iio: adc: Add support for AD4000
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v1 01/17] hwmon: pmbus: adm1266: Change nvmem reg_read/write return type
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v1 05/17] misc: ds1682: Change nvmem reg_read/write return type
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 6/6] iio: adc: Add support for AD4000
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH] iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF
- From: "A. Sverdlin" <alexander.sverdlin@xxxxxxxxxxx>
- [PATCH v4 2/2] iio: imu: inv_icm42600: add support of accel low-power mode
- From: inv.git-commit@xxxxxxx
- [PATCH v4 1/2] iio: document inv_icm42600 driver private sysfs attributes
- From: inv.git-commit@xxxxxxx
- [PATCH v4 0/2] iio: imu: inv_icm42600: add support of accel low power
- From: inv.git-commit@xxxxxxx
- [PATCH v3] iio: humidity: hdc3020: fix hysteresis representation
- From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
- Re: [PATCH v5 9/9] iio: adc: ad7173: Add support for AD411x devices
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v2] iio: humidity: hdc3020: fix hysteresis representation
- From: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
- Re: [PATCH v5 7/9] iio: adc: ad7173: refactor device info structs
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v1 00/17] nvmem: Handle change of return type in reg_read/write() definition
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- [PATCH v1 17/17] rtc: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 16/17] soc: tegra: fuse: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 15/17] thunderbolt: retimer: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 14/17] thunderbolt: switch: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 13/17] w1: slaves: w1_ds250x: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 12/17] soc: atmel: sfr: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 11/17] mtd: ubi: nvmem: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 10/17] mtd: core: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 09/17] misc: mchp_pci1xxxx: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 08/17] misc: eeprom: 93xx46: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 07/17] misc: eeprom: at25: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 06/17] misc: eeprom: at24: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 05/17] misc: ds1682: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 04/17] iio: pressure: bmp280: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 03/17] media: i2c: video-i2c: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 02/17] media: i2c: ov2740: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 01/17] hwmon: pmbus: adm1266: Change nvmem reg_read/write return type
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- [PATCH v1 00/17] nvmem: Handle change of return type in reg_read/write() definition
- From: Joy Chakraborty <joychakr@xxxxxxxxxx>
- Re: [PATCH V2 1/4] dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH V2 4/4] arm64: dts: allwinner: anbernic-rg35xx-h: Add ADC joysticks
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH V2 1/4] dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH V2 2/4] clk: sunxi-ng: h616: Add clock/reset for GPADC
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH V2 3/4] arm64: dts: allwinner: h616: Add GPADC device node
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH V2 0/4] Add GPADC for Allwinner H616
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- Re: [PATCH v3 5/6] dt-bindings: iio: adc: Add AD4000
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: iio: adc: amlogic,meson-saradc: add optional power-domains
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v6 4/7] dt-bindings: phy: armada-cp110-utmi: add optional swap-dx-lanes property
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 6/6] iio: adc: Add support for AD4000
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 0/6] Add support for AD4000 series of ADCs
- From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
- [PATCH v10 0/6] iio: new DMABUF based API v10
- From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- [PATCH v3 6/6] iio: adc: Add support for AD4000
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v10 6/6] Documentation: iio: Document high-speed DMABUF based API
- From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- [PATCH v10 5/6] iio: buffer-dmaengine: Support new DMABUF based userspace API
- From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- [PATCH v10 4/6] iio: buffer-dma: Enable support for DMABUFs
- From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- [PATCH v10 3/6] iio: core: Add new DMABUF interface infrastructure
- From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- [PATCH v10 2/6] dmaengine: dma-axi-dmac: Implement device_prep_peripheral_dma_vec
- From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- [PATCH v10 1/6] dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()
- From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- [PATCH] dt-bindings: iio: adc: amlogic,meson-saradc: add optional power-domains
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH 2/5] iio: adc: ad7266: use devm_regulator_get_enable_read_voltage
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 0/6] Add support for AD4000 series of ADCs
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 2/6] spi: bitbang: Implement support for MOSI idle state configuration
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 3/6] spi: spi-gpio: Add support for MOSI idle state configuration
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 1/3] iio: adc: ad7192: Clean up dev
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 3/3] iio: adc: ad7192: Fix clock config
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 2/3] dt-bindings: iio: adc: ad7192: Fix clock config
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 2/3] dt-bindings: iio: adc: ad7192: Fix clock config
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/3] iio: adc: ad7192: Clean up dev
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- Re: [PATCH v2 2/3] iio: light: ROHM BH1745 colour sensor
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH v2 3/3] iio: adc: ad7192: Fix clock config
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- [PATCH v2 2/3] dt-bindings: iio: adc: ad7192: Fix clock config
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- [PATCH v2 1/3] iio: adc: ad7192: Clean up dev
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- [PATCH 0/3] iio: adc: ad7192: Update
- From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
- Re: [PATCH 2/2] drivers: iio: frequency: adf4350: add clk provider
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/2] bindings: frequency: adf4350: add clk provider
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: adc: ad7173: add support for ad411x
- From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: meson: add support for the GXLX SoC
- From: Christian Hewitt <christianshewitt@xxxxxxxxx>
- [PATCH v3 6/6] MAINTAINERS: Add ScioSense ENS160
- From: Gustavo Silva <gustavograzs@xxxxxxxxx>
- [PATCH v3 5/6] iio: chemical: ens160: add power management support
- From: Gustavo Silva <gustavograzs@xxxxxxxxx>
- [PATCH v3 4/6] iio: chemical: ens160: add triggered buffer support
- From: Gustavo Silva <gustavograzs@xxxxxxxxx>
- [PATCH v3 3/6] iio: chemical: add driver for ENS160 sensor
- From: Gustavo Silva <gustavograzs@xxxxxxxxx>
- [PATCH v3 2/6] dt-bindings: iio: chemical: add ENS160 sensor
- From: Gustavo Silva <gustavograzs@xxxxxxxxx>
- [PATCH v3 1/6] dt-bindings: vendor-prefixes: add ScioSense
- From: Gustavo Silva <gustavograzs@xxxxxxxxx>
- [PATCH v3 0/6] Add driver for ENS160 sensor
- From: Gustavo Silva <gustavograzs@xxxxxxxxx>
- [PATCH v3 5/6] dt-bindings: iio: adc: Add AD4000
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v3 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v3 3/6] spi: spi-gpio: Add support for MOSI idle state configuration
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v3 2/6] spi: bitbang: Implement support for MOSI idle state configuration
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
- [PATCH v3 1/6] spi: Add SPI mode bit for MOSI idle state configuration
- From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Scanners]
[Yosemite Forum]