Hi,
On 24-11-11, Frank Li wrote:
> Add temp-sensor nxp,p3t1085 for imx93-9x9-qsb boards.
>
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> ---
> change from v1 to v3
> - none
> ---
> arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
> index 20ec5b3c21f42..36f2995acbe29 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
> @@ -221,6 +221,11 @@ wm8962: audio-codec@1a {
> >;
> };
>
> + p3t1085: temperature-sensor@48 {
> + compatible = "nxp,p3t1085";
> + reg = <0x48>;
> + };
Out of curiosity, did you tested that the I3C is working on a real
device, since you added the node here as I2C device? If not, please skip
adding the I3C part and keep it as TODO for later.
Regards,
Marco
> ptn5110: tcpc@50 {
> compatible = "nxp,ptn5110", "tcpci";
> reg = <0x50>;
>
> --
> 2.34.1
>
>
>
