Add basic function support for P3T1085 temperature sensor. - reuse tmp108 driver - Update imx93-9x9-qsb.dts To: Rob Herring <robh@xxxxxxxxxx> To: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx> To: Conor Dooley <conor+dt@xxxxxxxxxx> To: Jonathan Cameron <jic23@xxxxxxxxxx> To: Lars-Peter Clausen <lars@xxxxxxxxxx> To: Shawn Guo <shawnguo@xxxxxxxxxx> To: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> To: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx> To: Fabio Estevam <festevam@xxxxxxxxx> To: Jean Delvare <jdelvare@xxxxxxxx> To: Guenter Roeck <linux@xxxxxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Cc: linux-iio@xxxxxxxxxxxxxxx Cc: imx@xxxxxxxxxxxxxxx Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: Krzysztof Kozlowski <krzk@xxxxxxxxxx> Cc: linux-hwmon@xxxxxxxxxxxxxxx Signed-off-by: Frank Li <Frank.Li@xxxxxxx> Changes in v3: - Change cover letter subject - Split compatible string change to a new patch - Remove i3c/master.h - Update document about p3t1085 - Link to v2: https://lore.kernel.org/r/20241108-p3t1085-v2-0-6a8990a59efd@xxxxxxx Changes in v2: - Amost rewrite and reuse existed TMP108 driver - Link to v1: https://lore.kernel.org/r/20241107-p3t1085-v1-0-9a76cb85673f@xxxxxxx --- Frank Li (5): dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string hwmon: tmp108: Add NXP p3t1085 support hwmon: tmp108: Add helper function tmp108_common_probe() to prepare I3C support hwmon: tmp108: Add support for I3C device arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085 .../devicetree/bindings/hwmon/ti,tmp108.yaml | 8 ++- Documentation/hwmon/tmp108.rst | 8 +++ arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts | 5 ++ drivers/hwmon/Kconfig | 3 +- drivers/hwmon/tmp108.c | 71 ++++++++++++++++------ 5 files changed, 74 insertions(+), 21 deletions(-) --- base-commit: 74741a050b79d31d8d2eeee12c77736596d0a6b2 change-id: 20241107-p3t1085-fbd8726cbc0e Best regards, --- Frank Li <Frank.Li@xxxxxxx>
