The following changes since commit 9365f0de4303f82ed4c2db1c39d3de824b249d80: Merge 6.12-rc6 into char-misc-next (2024-11-05 09:36:29 +0100) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.13b for you to fetch changes up to 20fd1383cd616d61b2a79967da1221dc6cfb8430: iio: Move __private marking before struct element priv in struct iio_dev (2024-11-09 10:42:13 +0000) ---------------------------------------------------------------- IIO: 2nd set of new device support, features and cleanup for 6.13 Alongside new drivers and device support there are several large cleanups going on across the IIO tree and we see part of some of those in this pull request. Merged char-misc-next at point of 6.12-rc6 merge to avoid a conflict with a fix for the ad7380 merged earlier this cycle. Note that I previously messed this merge up and had to reconstruct it this morning so a coherent pull request was possible. The new stuff is all the same as has been in linux-next for some time with the exception of the kernel-doc related __private ordering fix that went in yesterday. New device support ================== adi,ad7380 - Support for adaq4370-4 and adaq4370 quad channel ADCs. adi,ad7606 - Various cleanups preceeding support of AD7607, AD7608 and AD7609 ADCs. adi,ad7779 - New driver supproting AD7770, AD7771 and AD7779 ADCs. allegro,als31300 - New driver for this 3D Linear Hall Effect sensor. bosch,bmi270 - Add support BMI260 which is similar but requires a different firmware image. bosch,smi240 - New driver for this IMU. ti,opt3001 - Add support opt3002 light sensor which has a wider spectral range than the opt3001. vishay,veml3235 - New driver for this ambient light sensor. Features ======== hid-sensors - Add support Human Proximity Range and Attention detection (requiring a new classification style channel type) adi,ad3552r - Add backend support and related platform driver to support use with an FPGA IP to allow QSPI + DDR bus operation and much higher data aquisition rates. (various rework preceeded this feature) adi,ad7606 - Various cleanup prior to enabling use with an IIO Backend and PWM trigger enabling much higher speed data capture. bosch,bme680 - Support control of preheat current - Support triggered buffer capture - Add SCALE and RAW channels (needed to enable the buffered capture). bosch,bmp280 - Enable sleeping to save power. - Add interrupt support for bmp3xx and bmp5xx devices. Also update bmp085 to new approach. - Enable data ready trigger. bosch,bmi270 - Add triggered buffer support - Add scale and sampling frequency control. vishay,veml6070 - Support integration time via DT binding for an external resistor value. Cleanup and minor fixes ======================= core - Fix a longstanding issue with event codes for differential channels. Note that not all drivers are yet fixed, but macros have been added to avoid potential repeats of this in future. - Tidy up handling in iio_read_acpi_mount matrix. - Mark iio_dev::priv with __private. Later move the marking before the field name to avoid a kernel-doc issue. treewide - Drop some pointless default n entries in Kconfig. - Add an iio_get_acpi_device_name_and_data() handler to replace some commonly repeated code. - simplify use of 'state' in write_event_config() callback as it is effectively a boolean. Once done make it a boolean (lots of drivers were updated to enable this) - some more use of devm_regulator_get_enable_read_voltage( to replace open coded versions. Where this enables it convert all of remove handling to devm based and drop the remove callback. - check returns from devm_mutex_init() accel drivers - Use aligned_s64 instead of s64 __aligned(8) adi,ad5791 - Add some missing GPIOs and power supplies that presumably were always hard wired on previous boards. - Refactor to use chip_info in device id tables. - Convert probe entirely to devm based simplify code and allowing remove() callback to be dropped. adi,ad7192 - Check return from spi_get_device_match_data() adi,ad74413r - Don't keep an unnecessary copy of the gpio after probe. - Use devm_regulator_get_enable_read_voltage() instead of open coding. - Apply cleanup.h approach to reduce complexity. adi,dac8460 - Fix a wrong compaitble ID due to a stray space. - Add an spi_device_id table. bosch,bmc150 - Drop some likely false ACPI IDs. - Drop left over unused ACPI specific code. bosch,bme680 - Add mising regmap.h include. - Reduce excessive sleep on startup. - Drop some cammelcase usage. - Use fsleep - Generalize read functions to allow for reuse. - Use s16 variable to avoid some incorrect casting bosch,bmg150 - Drop some likely false ACPI IDs. bosch,bmi270 - Drop unused FREQUENCY and SCALE attributes that always returned an error (they wil be back impelmented correctly). - Factor out the chip specific data into a structure to enable simple support for additional devices. isil,isl29018 - Drop ACPI_PTR() and CONFIG_ACPI guards as not worth the trouble for very minor saving. invensense,mpu6050 - Use much simpler test for ACPI firmware. kionix,kxcjk-1013 - Drop unnecessary ACPI entry in the i2c_device_id table. - Drop support KX022-1020 to fix a bug that was introduced with that change. Hopefully a fixed version will replace it soon. - Drop CONFIG guards for PM in favor of pm_ptr() and the compiler removing dead code. - Switch from enum to chip_info structure and add ODR times to that structure. - Deduplicate one of those ODR structures - Drop ACPI_PTR() and move ID table out of config guards. - Minor additional cleanup. liteon,ltr401 - Drop some likely false ACPI Ids and add LTER0303 which is know to be in use. microchip,pac1934 - Use much simpler test for ACPI firmware. vishay,veml6070 - Use unsigned int instead of just unsigned. - Use FIELD_PREP to make setting of field value explicit. Various other minor fixes to documentation ---------------------------------------------------------------- Alexandru Ardelean (5): iio: adc: ad7606: fix/persist oversampling_ratio setting iio: adc: ad7606: use realbits for sign-extending in scan_direct iio: adc: ad7606: rework scale-available to be static dt-bindings: iio: adc: adi,ad7606: document AD760{7,8,9} parts iio: adc: ad7606: add support for AD760{7,8,9} parts Andy Shevchenko (32): iio: gyro: bmg160: Drop most likely fake ACPI IDs iio: magnetometer: bmc150_magn: Drop most likely fake ACPI IDs iio: light: Remove "default n" entries iio: adc: Remove "default n" entries iio: magnetometer: bmc150: Drop dead code from the driver iio: adc: pac1934: Replace strange way of checking type of enumeration iio: imu: inv_mpu6050: Replace strange way of checking type of enumeration iio: acpi: Improve iio_read_acpi_mount_matrix() iio: acpi: Add iio_get_acpi_device_name_and_data() helper function iio: accel: kxcjk-1013: Remove redundant I²C ID iio: accel: kxcjk-1013: Revert "Add support for KX022-1020" iio: accel: kxcjk-1013: Switch from CONFIG_PM guards to pm_ptr() etc iio: accel: kxcjk-1013: Use local variable for regs iio: accel: kxcjk-1013: Rename kxcjk1013_info iio: accel: kxcjk-1013: Start using chip_info variables instead of enum iio: accel: kxcjk-1013: Move odr_start_up_times up in the code iio: accel: kxcjk-1013: Convert ODR times array to variable in chip_info iio: accel: kxcjk-1013: Get rid of enum kx_chipset iio: accel: kxcjk-1013: Replace a variant of iio_get_acpi_device_name_and_data() iio: accel: kxcjk-1013: drop ACPI_PTR() and move ID out of CONFIG_ACPI guards iio: accel: mma9551: Replace custom implementation of iio_get_acpi_device_name() iio: accel: mma9553: Replace custom implementation of iio_get_acpi_device_name() iio: gyro: bmg160: Replace custom implementation of iio_get_acpi_device_name() iio: light: isl29018: Replace a variant of iio_get_acpi_device_name_and_data() iio: light: isl29018: drop ACPI_PTR() and CONFIG_ACPI guards iio: light: ltr501: Drop most likely fake ACPI IDs iio: light: ltr501: Add LTER0303 to the supported devices iio: light: ltr501: Replace a variant of iio_get_acpi_device_name_and_data() iio: adc: ad4000: Check for error code from devm_mutex_init() call iio: adc: pac1921: Check for error code from devm_mutex_init() call iio: accel: kxcjk-1013: Deduplicate ODR startup time array iio: Mark iio_dev::priv member with __private Angelo Dureghello (8): dt-bindings: iio: dac: ad3552r: add iio backend support dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant iio: backend: extend features iio: dac: adi-axi-dac: extend features iio: dac: ad3552r: changes to use FIELD_PREP iio: dac: ad3552r: extract common code (no changes in behavior intended) iio: dac: ad3552r: add high-speed platform driver iio: dac: adi-axi-dac: add registering of child fdt node Axel Haslam (6): dt-bindings: iio: dac: ad5791: Add optional reset, clr and ldac gpios dt-bindings: iio: dac: ad5791: Add required voltage supplies iio: dac: ad5791: Include chip_info in device match tables iio: dac: ad5791: Add reset, clr and ldac gpios iio: dac: ad5791: Use devm_regulator_get_enable_read_voltage iio: dac: ad5791: Use devm_iio_device_register David Lechner (16): iio: dac: ad8460: fix DT compatible iio: dac: ad8460: add SPI device match table iio: dac: ad5380: use devm_regulator_get_enable_read_voltage() iio: dac: ad5380: drop driver remove callbacks iio: dac: ad5446: use devm_regulator_get_enable_read_voltage() iio: dac: ad5446: drop driver remove callbacks iio: dac: ad5504: use devm_regulator_get_enable_read_voltage() iio: dac: ad5504: drop driver remove callback iio: dac: ad5624r: use devm_regulator_get_enable_read_voltage() iio: dac: ad5624r: drop driver remove callback iio: dac: ad5761: use devm_regulator_get_enable_read_voltage() iio: dac: ad5761: drop driver remove callback iio: dac: ad5770r: use devm_regulator_get_enable_read_voltage() iio: dummy: use specialized event code macros iio: accel: mma9553: use specialized event code macros iio: events: make IIO_EVENT_CODE macro private Emil Gedenryd (2): dt-bindings: iio: light: opt3001: add compatible for opt3002 iio: light: opt3001: add support for TI's opt3002 light sensor Guillaume Stols (8): dt-bindings: iio: adc: ad7606: Remove spi-cpha from required dt-bindings: iio: adc: ad7606: Add iio backend bindings Documentation: iio: Document ad7606 driver iio: adc: ad7606: Add PWM support for conversion trigger iio: adc: ad7606: Add compatibility to fw_nodes iio: adc: ad7606: Introduce num_adc_channels iio: adc: ad7606: Add iio-backend support iio: adc: ad7606: Disable PWM usage for non backend version Javier Carrasco (6): iio: light: veml6070: use unsigned int instead of unsigned iio: light: veml6070: use field to set integration time dt-bindings: iio: light: veml6030: add veml3235 iio: light: add support for veml3235 dt-bindings: iio: light: veml6075: document vishay,rset-ohms iio: light: veml6070: add support for integration time Jonathan Cameron (3): iio: accel: replace s64 __aligned(8) with aligned_s64 Merge commit '9365f0de4303f82ed4c2db1c39d3de824b249d80' into HEAD iio: Move __private marking before struct element priv in struct iio_dev Julien Stephan (28): iio: light: bh1745: simplify code in write_event_config callback iio: light: ltr501: simplify code in write_event_config callback iio: light: veml6030: simplify code in write_event_config callback iio: imu: inv_mpu6050: simplify code in write_event_config callback iio: light: stk3310: simplify code in write_event_config callback iio: gyro: bmg160_core: remove trailing tab iio: light: ltr390: simplify code in write_event_config callback iio: proximity: hx9023s: simplify code in write_event_config callback iio: light: tsl2772: simplify code in write_event_config callback iio: proximity: irsd200: simplify code in write_event_config callback iio: proximity: sx9500: simplify code in write_event_config callback iio: light: adux1020: write_event_config: use local variable for interrupt value iio: fix write_event_config signature iio: accel: mma9551: use bool for event state iio: accel: sca3000: use bool for event state iio: imu: bmi323: use bool for event state iio: imu: st_lsm6dsx: use bool for event state iio: light: apds9300: use bool for event state iio: light: apds9306: simplifies if branch in apds9306_write_event_config iio: light: apds9960: convert als_int and pxs_int to bool iio: light: apds9960: remove useless return iio: events.h: add event identifier macros for differential channel iio: adc: ad7280a: use IIO_DIFF_EVENT_CODE macro helper dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts iio: adc: ad7380: fix oversampling formula iio: adc: ad7380: use local dev variable to shorten long lines iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4 docs: iio: ad7380: add adaq4370-4 and adaq4380-4 Justin Weiss (6): iio: imu: bmi270: Remove unused FREQUENCY / SCALE attributes iio: imu: bmi270: Provide chip info as configuration structure iio: imu: bmi270: Add triggered buffer for Bosch BMI270 IMU iio: imu: bmi270: Add scale and sampling frequency to BMI270 IMU dt-bindings: iio: imu: bmi270: Add Bosch BMI260 iio: imu: bmi270: Add support for BMI260 Neil Armstrong (3): dt-bindings: vendor-prefixes: Add Allegro MicroSystems, Inc dt-bindings: iio: magnetometer: document the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor iio: magnetometer: add Allegro MicroSystems ALS31300 3-D Linear Hall Effect driver Nuno Sa (4): iio: adc: ad7192: properly check spi_get_device_match_data() iio: addac: ad74413r: drop reset_gpio from struct ad74413r_state iio: addac: ad74413r: use devm_regulator_get_enable_read_voltage() iio: addac: ad74413r: simplify with cleanup.h Ramona Alexandra Nechita (3): dt-bindings: iio: adc: add ad7779 doc Documentation: ABI: added filter mode doc in sysfs-bus-iio drivers: iio: adc: add support for ad777x family Ricardo Ribalda (5): iio: hid-sensors: Add proximity and attention IDs iio: hid-sensors-prox: Factor-in hid_sensor_push_data iio: Add channel type for attention iio: hid-sensors-prox: Make proximity channel indexed iio: hid-sensor-prox: Add support for more channels Shen Jianping (2): dt-bindings: iio: imu: smi240: add Bosch smi240 iio: imu: smi240: add driver Vasileios Amoiridis (15): iio: pressure: bmp280: Use sleep and forced mode for oneshot captures dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices iio: pressure: bmp280: Add data ready trigger support iio: pressure: bmp280: Move bmp085 interrupt to new configuration iio: chemical: bme680: Add missing regmap.h include iio: chemical: bme680: optimize startup time iio: chemical: bme680: avoid using camel case iio: chemical: bme680: move to fsleep() iio: chemical: bme680: Fix indentation and unnecessary spaces iio: chemical: bme680: generalize read_*() functions iio: chemical: bme680: use s16 variable for temp value to avoid casting iio: chemical: bme680: refactorize set_mode() mode iio: chemical: bme680: Add SCALE and RAW channels iio: chemical: bme680: Add triggered buffer support iio: chemical: bme680: Add support for preheat current WangYuli (1): iio: accel: adxl355: Fix typo "accelaration" Yo-Jung (Leo) Lin (1): iio: gyro: list adis16137 in Kconfig description Documentation/ABI/testing/sysfs-bus-iio | 32 + Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 | 46 -- .../devicetree/bindings/iio/adc/adi,ad7380.yaml | 120 +++ .../devicetree/bindings/iio/adc/adi,ad7606.yaml | 81 +- .../devicetree/bindings/iio/adc/adi,ad7779.yaml | 110 +++ .../devicetree/bindings/iio/dac/adi,ad3552r.yaml | 7 + .../devicetree/bindings/iio/dac/adi,ad5791.yaml | 39 + .../devicetree/bindings/iio/dac/adi,axi-dac.yaml | 69 +- .../devicetree/bindings/iio/imu/bosch,bmi270.yaml | 4 +- .../devicetree/bindings/iio/imu/bosch,smi240.yaml | 51 ++ .../devicetree/bindings/iio/light/ti,opt3001.yaml | 4 +- .../bindings/iio/light/vishay,veml6030.yaml | 5 +- .../bindings/iio/light/vishay,veml6075.yaml | 18 + .../iio/magnetometer/allegromicro,als31300.yaml | 46 ++ .../devicetree/bindings/iio/pressure/bmp085.yaml | 22 +- .../devicetree/bindings/vendor-prefixes.yaml | 2 + Documentation/iio/ad7380.rst | 16 + Documentation/iio/ad7606.rst | 144 ++++ Documentation/iio/index.rst | 1 + MAINTAINERS | 8 +- drivers/iio/accel/adxl355_core.c | 2 +- drivers/iio/accel/adxl367.c | 2 +- drivers/iio/accel/adxl372.c | 2 +- drivers/iio/accel/adxl380.c | 2 +- drivers/iio/accel/bma180.c | 3 +- drivers/iio/accel/bma220_spi.c | 1 + drivers/iio/accel/bma400_core.c | 4 +- drivers/iio/accel/bmc150-accel-core.c | 2 +- drivers/iio/accel/bmc150-accel.h | 3 +- drivers/iio/accel/fxls8962af-core.c | 5 +- drivers/iio/accel/kionix-kx022a.c | 3 +- drivers/iio/accel/kxcjk-1013.c | 442 +++++----- drivers/iio/accel/kxsd9.c | 3 +- drivers/iio/accel/mma7455_core.c | 3 +- drivers/iio/accel/mma8452.c | 5 +- drivers/iio/accel/mma9551.c | 27 +- drivers/iio/accel/mma9553.c | 46 +- drivers/iio/accel/msa311.c | 3 +- drivers/iio/accel/mxc4005.c | 3 +- drivers/iio/accel/sca3000.c | 6 +- drivers/iio/accel/stk8312.c | 3 +- drivers/iio/accel/stk8ba50.c | 3 +- drivers/iio/adc/Kconfig | 15 +- drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ad4000.c | 4 +- drivers/iio/adc/ad7091r-base.c | 3 +- drivers/iio/adc/ad7192.c | 3 + drivers/iio/adc/ad7280a.c | 14 +- drivers/iio/adc/ad7291.c | 2 +- drivers/iio/adc/ad7380.c | 178 +++- drivers/iio/adc/ad7606.c | 797 +++++++++++++----- drivers/iio/adc/ad7606.h | 60 +- drivers/iio/adc/ad7606_par.c | 127 ++- drivers/iio/adc/ad7606_spi.c | 138 +++- drivers/iio/adc/ad7779.c | 914 +++++++++++++++++++++ drivers/iio/adc/ad799x.c | 2 +- drivers/iio/adc/hi8435.c | 2 +- drivers/iio/adc/max1363.c | 2 +- drivers/iio/adc/pac1921.c | 7 +- drivers/iio/adc/pac1934.c | 2 +- drivers/iio/adc/palmas_gpadc.c | 2 +- drivers/iio/adc/ti-ads1015.c | 2 +- drivers/iio/adc/xilinx-ams.c | 2 +- drivers/iio/adc/xilinx-xadc-events.c | 2 +- drivers/iio/adc/xilinx-xadc.h | 2 +- drivers/iio/addac/ad74413r.c | 81 +- drivers/iio/cdc/ad7150.c | 2 +- drivers/iio/chemical/Kconfig | 2 + drivers/iio/chemical/bme680.h | 11 +- drivers/iio/chemical/bme680_core.c | 366 +++++++-- drivers/iio/dac/Kconfig | 19 + drivers/iio/dac/Makefile | 2 + drivers/iio/dac/ad3552r-common.c | 249 ++++++ drivers/iio/dac/ad3552r-hs.c | 529 ++++++++++++ drivers/iio/dac/ad3552r-hs.h | 19 + drivers/iio/dac/ad3552r.c | 557 ++----------- drivers/iio/dac/ad3552r.h | 228 +++++ drivers/iio/dac/ad5380.c | 85 +- drivers/iio/dac/ad5421.c | 2 +- drivers/iio/dac/ad5446.c | 77 +- drivers/iio/dac/ad5504.c | 59 +- drivers/iio/dac/ad5624r.h | 1 - drivers/iio/dac/ad5624r_spi.c | 71 +- drivers/iio/dac/ad5761.c | 109 +-- drivers/iio/dac/ad5770r.c | 41 +- drivers/iio/dac/ad5791.c | 203 +++-- drivers/iio/dac/ad8460.c | 11 +- drivers/iio/dac/adi-axi-dac.c | 312 ++++++- drivers/iio/dummy/iio_simple_dummy.h | 2 +- drivers/iio/dummy/iio_simple_dummy_events.c | 32 +- drivers/iio/gyro/Kconfig | 2 +- drivers/iio/gyro/bmg160_core.c | 19 +- drivers/iio/gyro/bmg160_i2c.c | 6 +- drivers/iio/imu/Kconfig | 14 + drivers/iio/imu/Makefile | 2 + drivers/iio/imu/bmi270/Kconfig | 1 + drivers/iio/imu/bmi270/bmi270.h | 21 +- drivers/iio/imu/bmi270/bmi270_core.c | 441 +++++++++- drivers/iio/imu/bmi270/bmi270_i2c.c | 20 +- drivers/iio/imu/bmi270/bmi270_spi.c | 13 +- drivers/iio/imu/bmi323/bmi323_core.c | 10 +- drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c | 5 +- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 9 +- drivers/iio/imu/kmx61.c | 2 +- drivers/iio/imu/smi240.c | 621 ++++++++++++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 4 +- drivers/iio/industrialio-acpi.c | 48 +- drivers/iio/industrialio-backend.c | 78 ++ drivers/iio/industrialio-core.c | 3 +- drivers/iio/light/Kconfig | 14 +- drivers/iio/light/Makefile | 1 + drivers/iio/light/adux1020.c | 12 +- drivers/iio/light/apds9300.c | 20 +- drivers/iio/light/apds9306.c | 7 +- drivers/iio/light/apds9960.c | 10 +- drivers/iio/light/bh1745.c | 50 +- drivers/iio/light/cm36651.c | 2 +- drivers/iio/light/gp2ap002.c | 2 +- drivers/iio/light/gp2ap020a00f.c | 2 +- drivers/iio/light/hid-sensor-prox.c | 195 +++-- drivers/iio/light/iqs621-als.c | 2 +- drivers/iio/light/isl29018.c | 38 +- drivers/iio/light/ltr390.c | 7 +- drivers/iio/light/ltr501.c | 35 +- drivers/iio/light/max44009.c | 2 +- drivers/iio/light/opt3001.c | 191 ++++- drivers/iio/light/stk3310.c | 5 +- drivers/iio/light/tcs3472.c | 2 +- drivers/iio/light/tsl2563.c | 2 +- drivers/iio/light/tsl2591.c | 2 +- drivers/iio/light/tsl2772.c | 6 +- drivers/iio/light/us5182d.c | 2 +- drivers/iio/light/vcnl4000.c | 5 +- drivers/iio/light/veml3235.c | 495 +++++++++++ drivers/iio/light/veml6030.c | 5 +- drivers/iio/light/veml6070.c | 138 +++- drivers/iio/magnetometer/Kconfig | 13 + drivers/iio/magnetometer/Makefile | 1 + drivers/iio/magnetometer/als31300.c | 494 +++++++++++ drivers/iio/magnetometer/bmc150_magn.c | 15 - drivers/iio/magnetometer/bmc150_magn_i2c.c | 9 - drivers/iio/magnetometer/bmc150_magn_spi.c | 9 - drivers/iio/position/iqs624-pos.c | 2 +- drivers/iio/pressure/bmp280-core.c | 536 +++++++++++- drivers/iio/pressure/bmp280-i2c.c | 4 +- drivers/iio/pressure/bmp280-spi.c | 4 +- drivers/iio/pressure/bmp280.h | 43 + drivers/iio/proximity/aw96103.c | 2 +- drivers/iio/proximity/cros_ec_mkbp_proximity.c | 2 +- drivers/iio/proximity/hx9023s.c | 4 +- drivers/iio/proximity/irsd200.c | 5 +- drivers/iio/proximity/sx9500.c | 6 +- drivers/iio/proximity/sx_common.c | 2 +- drivers/iio/proximity/sx_common.h | 2 +- drivers/iio/proximity/vcnl3020.c | 2 +- drivers/iio/temperature/mcp9600.c | 2 +- drivers/iio/temperature/tmp007.c | 2 +- include/linux/hid-sensor-ids.h | 2 + include/linux/iio/backend.h | 17 + include/linux/iio/events.h | 31 +- include/linux/iio/iio.h | 16 +- include/uapi/linux/iio/types.h | 1 + tools/iio/iio_event_monitor.c | 2 + 163 files changed, 8327 insertions(+), 2221 deletions(-) delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml create mode 100644 Documentation/devicetree/bindings/iio/imu/bosch,smi240.yaml create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/allegromicro,als31300.yaml create mode 100644 Documentation/iio/ad7606.rst create mode 100644 drivers/iio/adc/ad7779.c create mode 100644 drivers/iio/dac/ad3552r-common.c create mode 100644 drivers/iio/dac/ad3552r-hs.c create mode 100644 drivers/iio/dac/ad3552r-hs.h create mode 100644 drivers/iio/dac/ad3552r.h create mode 100644 drivers/iio/imu/smi240.c create mode 100644 drivers/iio/light/veml3235.c create mode 100644 drivers/iio/magnetometer/als31300.c
