Add check for the return value of clk_enable() in order to catch the
potential exception.
Fixes: c5b8425514da ("counter: stm32-timer-cnt: add power management support")
Fixes: ad29937e206f ("counter: Add STM32 Timer quadrature encoder")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@xxxxxxxxx>
---
Changelog:
v1 -> v2:
1. Add dev_err() to indicate the reason for the error code.
---
drivers/counter/stm32-timer-cnt.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c
index 186e73d6ccb4..9c188d9edd89 100644
--- a/drivers/counter/stm32-timer-cnt.c
+++ b/drivers/counter/stm32-timer-cnt.c
@@ -214,11 +214,17 @@ static int stm32_count_enable_write(struct counter_device *counter,
{
struct stm32_timer_cnt *const priv = counter_priv(counter);
u32 cr1;
+ int ret;
if (enable) {
regmap_read(priv->regmap, TIM_CR1, &cr1);
- if (!(cr1 & TIM_CR1_CEN))
- clk_enable(priv->clk);
+ if (!(cr1 & TIM_CR1_CEN)) {
+ ret = clk_enable(priv->clk);
+ if (ret) {
+ dev_err(counter->parent, "Cannot enable clock %d\n", ret);
+ return ret;
+ }
+ }
regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN,
TIM_CR1_CEN);
@@ -816,7 +822,11 @@ static int __maybe_unused stm32_timer_cnt_resume(struct device *dev)
return ret;
if (priv->enabled) {
- clk_enable(priv->clk);
+ ret = clk_enable(priv->clk);
+ if (ret) {
+ dev_err(dev, "Cannot enable clock %d\n", ret);
+ return ret;
+ }
/* Restore registers that may have been lost */
regmap_write(priv->regmap, TIM_SMCR, priv->bak.smcr);
--
2.25.1
