On Thu, 14 Nov 2024 15:03:10 +0200, Ciprian Hegbeli wrote: > The ADF4382A is a high performance, ultralow jitter, Frac-N PLL > with integrated VCO ideally suited for LO generation for 5G applications > or data converter clock applications. The high performance > PLL has a figure of merit of -239 dBc/Hz, low 1/f Noise and > high PFD frequency of 625MHz in integer mode that can achieve > ultralow in-band noise and integrated jitter. The ADF4382A can > generate frequencies in a fundamental octave range of 11.5 GHz to > 21 GHz, thereby eliminating the need for sub-harmonic filters. The > divide by 2 and 4 output dividers on the part allow frequencies to > be generated from 5.75GHz to 10.5GHz and 2.875GHz to 5.25GHz > respectively. > > Signed-off-by: Ciprian Hegbeli <ciprian.hegbeli@xxxxxxxxxx> > --- > .../bindings/iio/frequency/adi,adf4382.yaml | 141 ++++++++++++++++++ > 1 file changed, 141 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adf4382.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/frequency/adi,adf4382.example.dtb: frequency@0: 'adi,charge-pump-current' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/frequency/adi,adf4382.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241114130340.7354-2-ciprian.hegbeli@xxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
