On Thu, 31 Oct 2024 00:28:52 +0530, Jishnu Prakash wrote:
> For the PMIC5-Gen3 type PMICs, ADC peripheral is present in HW for the
> following PMICs: PMK8550, PM8550, PM8550B and PM8550VX PMICs.
>
> It is similar to PMIC5-Gen2, with SW communication to ADCs on all PMICs
> going through PBS(Programmable Boot Sequence) firmware through a single
> register interface. This interface is implemented on an SDAM (Shared
> Direct Access Memory) peripheral on the master PMIC PMK8550 rather
> than a dedicated ADC peripheral.
>
> Add documentation for PMIC5 Gen3 ADC and macro definitions for ADC
> channels and virtual channels (combination of ADC channel number and
> PMIC SID number) per PMIC, to be used by clients of this device.
>
> Co-developed-by: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
> Signed-off-by: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
> Signed-off-by: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
> ---
> Changes since v3:
> - Added ADC5 Gen3 documentation changes in existing qcom,spmi-vadc.yaml file
> instead of adding separate file and updated top-level constraints in documentation
> file based on discussion with reviewers.
> - Dropped default SID definitions.
> - Addressed other reviewer comments.
>
> Changes since v2:
> - Moved ADC5 Gen3 documentation into a separate new file.
>
> Changes since v1:
> - Updated properties separately for all compatibles to clarify usage
> of new properties and updates in usage of old properties for ADC5 Gen3.
> - Avoided updating 'adc7' name to 'adc5 gen2' and just left a comment
> mentioning this convention.
> - Used predefined channel IDs in individual PMIC channel definitions
> instead of numeric IDs.
> - Addressed other comments from reviewers.
>
> .../bindings/iio/adc/qcom,spmi-vadc.yaml | 220 ++++++++++++++++--
> .../iio/adc/qcom,spmi-adc5-gen3-pm8550.h | 46 ++++
> .../iio/adc/qcom,spmi-adc5-gen3-pm8550b.h | 85 +++++++
> .../iio/adc/qcom,spmi-adc5-gen3-pm8550vx.h | 22 ++
> .../iio/adc/qcom,spmi-adc5-gen3-pmk8550.h | 52 +++++
> include/dt-bindings/iio/adc/qcom,spmi-vadc.h | 81 +++++++
> 6 files changed, 486 insertions(+), 20 deletions(-)
> create mode 100644 include/dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8550.h
> create mode 100644 include/dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8550b.h
> create mode 100644 include/dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8550vx.h
> create mode 100644 include/dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pmk8550.h
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.example.dts:88:18: fatal error: dt-bindings/iio/adc/qcom,spmi-vadc.h: No such file or directory
88 | #include <dt-bindings/iio/adc/qcom,spmi-vadc.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
make[2]: *** [scripts/Makefile.dtbs:129: Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.example.dtb] Error 1
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241030185854.4015348-3-quic_jprakash@xxxxxxxxxxx
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
