Linux IIO Development

• Thread Index

• Re: [PATCH v4 2/3] iio: adc: ad7625: add driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 7/8] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 6/8] dt-bindings: iio: adc: document diff-channels corner case for some ADCs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: iio: adc: add AD762x/AD796x ADCs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: imu: smi240: add Bosch smi240
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• RE: [PATCH v3 0/2] Add support to AD8460 Waveform Generator DAC
  • From: "Tinaco, Mariel" <Mariel.Tinaco@xxxxxxxxxx>
• Re: [PATCH v5 2/3] iio: adc: sophgo-saradc: Add driver for Sophgo CV1800B SARADC
  • From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
• Re: [PATCH v4 0/3] iio: adc: add new ad7625 driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• [PATCH v4 3/3] docs: iio: new docs for ad7625 driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• [PATCH v4 2/3] iio: adc: ad7625: add driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: iio: adc: add AD762x/AD796x ADCs
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• [PATCH v4 0/3] iio: adc: add new ad7625 driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• [PATCH v1 1/1] iio: imu: inv_mpu6050: Use upper_16_bits()/lower_16_bits() helpers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 1/1] iio: light: cm32181: Remove duplicate ACPI handle check
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/8] dt-bindings: iio: adc: ad7606: Add iio backend bindings
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: ad7625: add driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• Re: (subset) [PATCH V4 00/15] Add Battery and USB Supply for AXP717
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v5 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: imu: smi240: add Bosch smi240
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v5 2/2] iio: imu: smi240: add driver
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v5 0/2] iio: imu: smi240: add bosch smi240 driver
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• Re: [PATCH RFC 2/8] iio: backend: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH V10 2/2] iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  • From: wangshuaijie@xxxxxxxxxx
• [PATCH V10 1/2] dt-bindings: iio: aw96103: Add bindings for aw96103/aw96105 sensor
  • From: wangshuaijie@xxxxxxxxxx
• [PATCH V10 0/2] Add support for aw96103/aw96105 proximity sensor
  • From: wangshuaijie@xxxxxxxxxx
• Re: [PATCH v5 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v5 0/7] pressure: bmp280: Minor cleanup and interrupt support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v5 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v5 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v5 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH 4/8] pwm: Export pwm_get_state_hw
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH] iio: event_monitor: Fix missing free in main
  • From: zhangjiao2 <zhangjiao2@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: proximity: hx9023s: Use 'CLOCK_BOOTTIME' as the default clock source
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: ad7625: add driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v2] tools/counter: Close fd when exit
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3 8/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v3 7/8] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v3 6/8] dt-bindings: iio: adc: document diff-channels corner case for some ADCs
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v3 5/8] iio: adc: ad7606: rework available attributes for SW channels
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v3 4/8] iio: adc: ad7606: wrap channel ranges & scales into struct
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v3 3/8] iio: adc: ad7606: split a 'ad7606_sw_mode_setup()' from probe
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v3 2/8] iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct()
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v3 1/8] iio: adc: ad7606: add 'bits' parameter to channels macros
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v3 0/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: dac: add docs for ad8460
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Add support to AD8460 Waveform Generator DAC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: dac: add docs for ad8460
  • From: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx>
• [PATCH v3 0/2] Add support to AD8460 Waveform Generator DAC
  • From: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx>
• [PATCH v2] tools/counter: Close fd when exit
  • From: zhangjiao2 <zhangjiao2@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: imu: add bmi270 bindings
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• Re: [PATCH V9 2/2] iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] tools/counter: close fd when exit
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] tools: iio: rm .*.cmd when make clean
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH V4 14/15] power: supply: axp20x_battery: add support for AXP717
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: (subset) [PATCH V4 00/15] Add Battery and USB Supply for AXP717
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [PATCH v1 2/3] iio: proximity: sx_common: Unexport sx_common_get_raw_register_config()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/3] iio: proximity: sx_common: Drop unused acpi.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/3] iio: imu: fxos8700: Drop unused acpi.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 0/3] iio: reduce acpi.h usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 10/22] iio: dac: max517: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 10/22] iio: dac: max517: Get platform data via dev_get_platdata()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwmon: Introduce ADS71x8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 0/8] iio: dac: introducing ad3552r-axi
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 7/8] iio: dac: ad3552r: add axi platform driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 5/8] iio: dac: ad3552r: changes to use FIELD_PREP
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 4/8] dt-bindings: iio: dac: add adi axi-dac bus property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 3/8] iio: backend adi-axi-dac: backend features
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 2/8] iio: backend: extend features
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] tools: iio: rm .*.cmd when make clean
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/3] iio: adc: sophgo-saradc: Add driver for Sophgo CV1800B SARADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: imu: st_lsm6dsx: Use aligned data type for timestamp
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/3] iio: hid-sensor: Use aligned data type for timestamp
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/3] iio: imu: st_lsm6dsx: Use aligned data type for timestamp
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 0/3] iio: Introduce and use aligned_s64 type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/3] types: Complement the aligned types with signed 64-bit one
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 00/22] iio: use dev_get_platdata() to access platform_data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: imu: inv_mpu6050: Move setting 'wom_bits' to probe function
  • From: Gyeyoung Baek <gye976@xxxxxxxxx>
• Re: [RFC PATCH 0/8] iio: dac: introducing ad3552r-axi
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 3/3] drivers: iio: adc: add support for ad777x family
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/7] pressure: bmp280: Minor cleanup and interrupt support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH v4 3/3] drivers: iio: adc: add support for ad777x family
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• Re: [PATCH v5 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 13/15] iio: light: st_uvis25: use irq_get_trigger_type()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] HID: hid-sensor-custom: Convert comma to semicolon
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PULL] IIO: 1st set of fixes for 6.11
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 14/22] iio: imu: st_lsm6dsx: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PULL] IIO: 1st set of New device support features and cleanup for 6.12
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] tools/counter: close fd when exit
  • From: zhangjiao2 <zhangjiao2@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V9 0/2] Add support for aw96103/aw96105 proximity sensor
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH 0/8] iio: dac: introducing ad3552r-axi
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH RFC 7/8] iio: dac: ad3552r: add axi platform driver
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v2 7/8] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 14/22] iio: imu: st_lsm6dsx: Get platform data via dev_get_platdata()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: temperature: tmp006: document interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 17/22] iio: light: lm3533-als: Get platform data via dev_get_platdata()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH V9 0/2] Add support for aw96103/aw96105 proximity sensor
  • From: wangshuaijie@xxxxxxxxxx
• [PATCH v3 2/2] iio: proximity: vl53l0x-i2c: Added continuous mode support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v3 1/2] iio: proximity: vl53l0x-i2c: Added sensor ID check
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v3 0/2] Continuous mode support for VL53l0x
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH] HID: hid-sensor-custom: Convert comma to semicolon
  • From: Chen Ni <nichen@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: proximity: vl53l0x-i2c: Added continuous mode support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: proximity: vl53l0x-i2c: Added continuous mode support
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v1 22/22] iio: pressure: hid-sensor-press: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 20/22] iio: orientation: hid-sensor-rotation: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 19/22] iio: orientation: hid-sensor-incl-3d: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 18/22] iio: magnetometer: hid-sensor-magn-3d: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 07/22] iio: dac: ad5504: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 13/22] iio: gyro: hid-sensor-gyro-3d: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 21/22] iio: position: hid-sensor-custom-intel-hinge: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 09/22] iio: dac: m62332: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 06/22] iio: adc: ltc2497: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 17/22] iio: light: lm3533-als: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 05/22] iio: adc: ad7793: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 12/22] iio: frequency: adf4350: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 15/22] iio: light: hid-sensor-als: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 11/22] iio: frequency: ad9523: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 14/22] iio: imu: st_lsm6dsx: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 16/22] iio: light: hid-sensor-prox: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 08/22] iio: dac: ad5791: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 03/22] iio: adc: ad7791: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 04/22] iio: adc: ad7887: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 10/22] iio: dac: max517: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 00/22] iio: use dev_get_platdata() to access platform_data
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 01/22] iio: accel: hid-sensor-accel-3d: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 02/22] iio: adc: ad7266: Get platform data via dev_get_platdata()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 2/3] iio: adc: sophgo-saradc: Add driver for Sophgo CV1800B SARADC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 7/8] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v5 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v5 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v5 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v5 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v5 3/7] iio: pressure: bmp280: Remove config error check for IIR filter updates
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v5 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v5 1/7] iio: pressure: bmp280: Use bulk read for humidity calibration data
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v5 0/7] pressure: bmp280: Minor cleanup and interrupt support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v2 7/8] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v2 6/8] dt-bindings: iio: adc: document diff-channels corner case for some ADCs
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH 13/15] iio: light: st_uvis25: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Revert patch 1908f13c4682 ("iio: imu: inv_mpu6060: Remove duplicata code between labels")
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 15/15] iio: pressure: bmp280: use irq_get_trigger_type()
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH RFC 5/8] iio: dac: ad3552r: changes to use FIELD_PREP
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH RFC 3/8] iio: backend adi-axi-dac: backend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: temperature: tmp006: document interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwmon: Introduce ADS71x8
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH RFC 2/8] iio: backend: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: AW: [PATCH 1/2] dt-bindings: hwmon: Introduce ADS71x8
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 13/15] iio: light: st_uvis25: use irq_get_trigger_type()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 07/15] iio: humidity: hts221: use irq_get_trigger_type()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• AW: [PATCH 1/2] dt-bindings: hwmon: Introduce ADS71x8
  • From: "Sperling, Tobias" <Tobias.Sperling@xxxxxxxxxxx>
• AW: [PATCH 1/2] dt-bindings: hwmon: Introduce ADS71x8
  • From: "Sperling, Tobias" <Tobias.Sperling@xxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: temperature: tmp006: document interrupt
  • From: Antoni Pokusinski <apokusinski01@xxxxxxxxx>
• [PATCH 1/2] iio: temperature: tmp006: add triggered buffer support
  • From: Antoni Pokusinski <apokusinski01@xxxxxxxxx>
• [PATCH 0/2] iio: temperature: tmp006: support for drdy irq
  • From: Antoni Pokusinski <apokusinski01@xxxxxxxxx>
• AW: [PATCH 1/2] dt-bindings: hwmon: Introduce ADS71x8
  • From: "Sperling, Tobias" <Tobias.Sperling@xxxxxxxxxxx>
• [PATCH -next] counter: ftm-quaddec: Enable module autoloading
  • From: Liao Chen <liaochen4@xxxxxxxxxx>
• [PATCH v2 2/2] iio: proximity: vl53l0x-i2c: Added continuous mode support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v2 1/2] iio: proximity: vl53l0x-i2c: Added sensor ID check
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH v2 0/2] Continuous mode support for VL53l0x
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• Re: [PATCH v2 7/8] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 06/15] iio: gyro: mpu3050: use irq_get_trigger_type()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/8] dt-bindings: iio: adc: document diff-channels corner case for some ADCs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 13/15] iio: light: st_uvis25: use irq_get_trigger_type()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/15] IIO: use irq_get_trigger_type() instead of opencoding.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 12/15] iio: imu: st_lsm6dsx: use irq_get_trigger_type()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 07/15] iio: humidity: hts221: use irq_get_trigger_type()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 08/15] iio: imu: bmi160: use irq_get_trigger_type()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 05/15] iio: gyro: fxas21002c: use irq_get_trigger_type()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 04/15] iio: common: st: use irq_get_trigger_type()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 03/15] iio: adc: ti-ads1015: use irq_get_trigger_type()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/15] iio: accel: fxls8962af: use irq_get_trigger_type()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 12/15] iio: imu: st_lsm6dsx: use irq_get_trigger_type()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
  • From: Jason Liu <jasonliu10041728@xxxxxxxxx>
• Re: iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: gyeyoung <gye976@xxxxxxxxx>
• Re: [PATCH] iio: proximity: hx9023s: Use 'CLOCK_BOOTTIME' as the default clock source
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: Revert patch 1908f13c4682 ("iio: imu: inv_mpu6060: Remove duplicata code between labels")
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• [PATCH] iio: proximity: hx9023s: Use 'CLOCK_BOOTTIME' as the default clock source
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v2 8/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v2 6/8] dt-bindings: iio: adc: document diff-channels corner case for some ADCs
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v2 7/8] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v2 5/8] iio: adc: ad7606: rework available attributes for SW channels
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v2 4/8] iio: adc: ad7606: wrap channel ranges & scales into struct
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v2 3/8] iio: adc: ad7606: split a 'ad7606_sw_mode_setup()' from probe
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v2 2/8] iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct()
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v2 1/8] iio: adc: ad7606: add 'bits' parameter to channels macros
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v2 0/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: gyeyoung <gye976@xxxxxxxxx>
• Revert patch 1908f13c4682 ("iio: imu: inv_mpu6060: Remove duplicata code between labels")
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 02/15] iio: accel: fxls8962af: use irq_get_trigger_type()
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH RFC 4/8] dt-bindings: iio: dac: add adi axi-dac bus property
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH 14/15] iio: magn: ak8974: use irq_get_trigger_type()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 06/15] iio: gyro: mpu3050: use irq_get_trigger_type()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: imu: add bmi270 bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH] tools: iio: rm .*.cmd when make clean
  • From: zhangjiao2 <zhangjiao2@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
  • From: Jason Liu <jasonliu10041728@xxxxxxxxx>
• [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
  • From: Jason Liu <jasonliu10041728@xxxxxxxxx>
• Re: iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: gyeyoung <gye976@xxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: gyeyoung <gye976@xxxxxxxxx>
• [PATCH 2/2] iio: imu: Add i2c driver for bmi270 imu
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: imu: add bmi270 bindings
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• [PATCH 0/2] Add I2C driver for Bosch BMI270 IMU
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• Re: iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH] iio: adc: standardize on formatting for id match tables
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: proximity: vl53l0x-i2c: Added continuous mode support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 15/15] iio: pressure: bmp280: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 14/15] iio: magn: ak8974: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 13/15] iio: light: st_uvis25: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 12/15] iio: imu: st_lsm6dsx: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 11/15] iio: imu: inv_mpu6050: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 10/15] iio: imu: inv_icm42600: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 09/15] iio: imu: bmi323: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 08/15] iio: imu: bmi160: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 07/15] iio: humidity: hts221: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 06/15] iio: gyro: mpu3050: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 04/15] iio: common: st: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 05/15] iio: gyro: fxas21002c: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 03/15] iio: adc: ti-ads1015: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 02/15] iio: accel: fxls8962af: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 01/15] iio: accel: adxl380: use irq_get_trigger_type()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 00/15] IIO: use irq_get_trigger_type() instead of opencoding.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: gyeyoung <gye976@xxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH v2] iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: Gyeyoung Baek <gye976@xxxxxxxxx>
• [PATCH] iio: imu: inv_mpu6050: Remove duplicate code between labels
  • From: Gyeyoung Baek <gye976@xxxxxxxxx>
• Re: [PATCH 2/2] iio: proximity: vl53l0x-i2c: Added continuous mode support
  • From: Abhash jha <abhashkumarjha123@xxxxxxxxx>
• Re: [PATCH V9 0/2] Add support for aw96103/aw96105 proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] riscv: dts: sophgo: Add SARADC description for Sophgo CV1800B
  • From: Inochi Amaoto <inochiama@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio: proximity: vl53l0x-i2c: Added continuous mode support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: proximity: vl53l0x-i2c: Added sensor ID check
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwmon: Introduce ADS71x8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwmon: Introduce ADS71x8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 8/8] iio: ABI: add DAC sysfs synchronous_mode parameter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 7/8] iio: dac: ad3552r: add axi platform driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 5/8] iio: dac: ad3552r: changes to use FIELD_PREP
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 0/2] iio: imu: st_lsm6dsx: Clean up ACPI/fwnode code paths
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH 0/8] iio: dac: introducing ad3552r-axi
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 3/8] iio: backend adi-axi-dac: backend features
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 2/8] iio: backend: extend features
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/3] Add SARADC support on Sophgo CV18XX series
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/3] iio: adc: sophgo-saradc: Add driver for Sophgo CV1800B SARADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] tools: iio: rm .*.cmd when make clean
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 0/2] iio: imu: st_lsm6dsx: Clean up ACPI/fwnode code paths
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mcp320x: Drop vendorless compatible strings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/3] iio: adc: sophgo-saradc: Add driver for Sophgo CV1800B SARADC
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] iio: proximity: vl53l0x-i2c: Added continuous mode support
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH 1/2] iio: proximity: vl53l0x-i2c: Added sensor ID check
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• [PATCH 0/2] Continuous mode support for VL53l0x
  • From: Abhash Jha <abhashkumarjha123@xxxxxxxxx>
• Re: [PATCH RFC 4/8] dt-bindings: iio: dac: add adi axi-dac bus property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RFC 4/8] dt-bindings: iio: dac: add adi axi-dac bus property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwmon: Introduce ADS71x8
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: hwmon: Introduce ADS71x8
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, IIO and Power due for the v6.12 merge window
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH RFC 4/8] dt-bindings: iio: dac: add adi axi-dac bus property
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH RFC 4/8] dt-bindings: iio: dac: add adi axi-dac bus property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V4 14/15] power: supply: axp20x_battery: add support for AXP717
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v4 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v4 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v4 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v4 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v4 1/7] iio: pressure: bmp280: Use bulk read for humidity calibration data
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: iio: adc: sophgo,cv1800b-saradc: Add Sophgo CV1800B SARADC
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RFC 4/8] dt-bindings: iio: dac: add adi axi-dac bus property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH RFC 4/8] dt-bindings: iio: dac: add adi axi-dac bus property
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH RFC 8/8] iio: ABI: add DAC sysfs synchronous_mode parameter
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH RFC 7/8] iio: dac: ad3552r: add axi platform driver
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH RFC 6/8] iio: dac: ad3552r: extract common code (no changes in behavior intended)
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH RFC 5/8] iio: dac: ad3552r: changes to use FIELD_PREP
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH RFC 4/8] dt-bindings: iio: dac: add adi axi-dac bus property
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH RFC 3/8] iio: backend adi-axi-dac: backend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH RFC 2/8] iio: backend: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH RFC 1/8] dt-bindings: iio: dac: ad3552r: add io-backend property
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [RFC PATCH 0/8] iio: dac: introducing ad3552r-axi
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v5 3/3] riscv: dts: sophgo: Add SARADC description for Sophgo CV1800B
  • From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
• [PATCH v5 2/3] iio: adc: sophgo-saradc: Add driver for Sophgo CV1800B SARADC
  • From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: iio: adc: sophgo,cv1800b-saradc: Add Sophgo CV1800B SARADC
  • From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
• [PATCH v5 0/3] Add SARADC support on Sophgo CV18XX series
  • From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V4 00/15] Add Battery and USB Supply for AXP717
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH V4 11/15] mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH V4 11/15] mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/7] iio: pressure: bmp280: Use bulk read for humidity calibration data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 09/12] dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH] tools: iio: rm .*.cmd when make clean
  • From: zhangjiao2 <zhangjiao2@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v4 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v4 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v4 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v4 3/7] iio: pressure: bmp280: Remove config error check for IIR filter updates
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v4 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v4 1/7] iio: pressure: bmp280: Use bulk read for humidity calibration data
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v4 0/7] pressure: bmp280: Minor cleanup and interrupt support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: imu: smi240: imu driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad4030: add driver for ad4030-24
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: iio: trigger: Software Resend of Triggers
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 6/7] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH] tools/iio: Add memory allocation failure check for trigger_name
  • From: Zhu Jun <zhujun2@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] tools/iio: Add memory allocation failure check for trigger_name
  • From: Zhu Jun <zhujun2@xxxxxxxxxxxxxxxxxxxx>
• Re: iio: trigger: Software Resend of Triggers
  • From: Ibrahim Bagriyanik <ibrahim.bagriyanikb@xxxxxxxxx>
• Re: [PATCH v3 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: imu: st_lsm6dsx: Remove useless dev_fwnode() calls
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 09/12] dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad4030: add driver for ad4030-24
  • From: "Esteban Blanc" <eblanc@xxxxxxxxxxxx>
• Re: (subset) [PATCH V4 11/15] mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH V4 14/15] power: supply: axp20x_battery: add support for AXP717
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: (subset) [PATCH V4 00/15] Add Battery and USB Supply for AXP717
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: imu: st_lsm6dsx: Remove useless dev_fwnode() calls
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: imu: st_lsm6dsx: Remove useless dev_fwnode() calls
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: imu: st_lsm6dsx: Remove useless dev_fwnode() calls
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 7/7] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH 1/7] iio: adc: ad7606: add 'bits' parameter to channels macros
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH V9 1/2] dt-bindings: iio: aw96103: Add bindings for aw96103/aw96105 sensor
  • From: wangshuaijie@xxxxxxxxxx
• [PATCH V9 0/2] Add support for aw96103/aw96105 proximity sensor
  • From: wangshuaijie@xxxxxxxxxx
• [PATCH V9 2/2] iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  • From: wangshuaijie@xxxxxxxxxx
• Re: [PATCH v2 11/12] arm64: dts: rockchip: Add rk3576 SoC base DT
  • From: zhangqing <zhangqing@xxxxxxxxxxxxxx>
• Re: [PATCH v2 09/12] dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH v1 2/2] iio: imu: st_lsm6dsx: Remove useless dev_fwnode() calls
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 1/2] iio: imu: st_lsm6dsx: Use iio_read_acpi_mount_matrix() helper
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 0/2] iio: imu: st_lsm6dsx: Clean up ACPI/fwnode code paths
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 0/1] iio: bmi323: have the peripheral consume less power
  • From: Denis Benato <benato.denis96@xxxxxxxxx>
• Re: [PATCH v2 11/12] arm64: dts: rockchip: Add rk3576 SoC base DT
  • From: "Diederik de Haas" <didi.debian@xxxxxxxxx>
• Re: [PATCH v2 12/12] arm64: dts: rockchip: Add rk3576-armsom-sige5 board
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH] iio: adc: mcp320x: Drop vendorless compatible strings
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 11/12] arm64: dts: rockchip: Add rk3576 SoC base DT
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• Re: [PATCH v2 11/12] arm64: dts: rockchip: Add rk3576 SoC base DT
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: imu: smi240: imu driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: imu: smi240: devicetree binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4 2/2] iio: imu: smi240: imu driver
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: imu: smi240: devicetree binding
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v4 0/2] iio: imu: smi240: add bosch smi240 driver
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• Re: [PATCH V8 2/2] iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH V8 2/2] iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: iio: trigger: Software Resend of Triggers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: adc: xilinx-ams: use device_* to iterate over device child nodes
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: (subset) [PATCH V4 11/15] mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: adc: ad4695: implement calibration support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5449: drop support for platform data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: adc: xilinx-ams: use device_* to iterate over device child nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/4] iio: adc: ad4695: implement calibration support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/4] iio: magnetometer: ak8975: Relax failure on unknown id
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 0/1] iio: bmi323: have the peripheral consume less power
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/4] iio: magnetometer: ak8975: Relax failure on unknown id
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] iio: bmi323: peripheral in lowest power state on suspend
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/7] iio: pressure: bmp280: Remove config error check for IIR filter updates
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [Bug 219192] drivers/iio/imu/adis16400.o: warning: objtool: adis16400_write_raw() falls through to next function adis16400_show_flash_count()
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [Bug 219192] New: drivers/iio/imu/adis16400.o: warning: objtool: adis16400_write_raw() falls through to next function adis16400_show_flash_count()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: Add everlight pm16d17 binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 5/6] iio: adc: ad4030: add support for ad4632-16 and ad4632-24
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: iio: adc: add ADI ad4030, ad4630 and ad4632
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: Add everlight pm16d17 binding
  • From: "Li, Hua Qian" <HuaQian.Li@xxxxxxxxxxx>
• Re: [PATCH v2 12/12] arm64: dts: rockchip: Add rk3576-armsom-sige5 board
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH v2 11/12] arm64: dts: rockchip: Add rk3576 SoC base DT
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• [Bug 219192] drivers/iio/imu/adis16400.o: warning: objtool: adis16400_write_raw() falls through to next function adis16400_show_flash_count()
  • From: bugzilla-daemon@xxxxxxxxxx
• [Bug 219192] New: drivers/iio/imu/adis16400.o: warning: objtool: adis16400_write_raw() falls through to next function adis16400_show_flash_count()
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH v3 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] iio/inv_icm42600: add inv_icm42600 id_table
  • From: Jason Liu <jasonliu10041728@xxxxxxxxx>
• iio: trigger: Software Resend of Triggers
  • From: Ibrahim Bagriyanik <ibrahim.bagriyanikb@xxxxxxxxx>
• Re: [PATCH v2 09/12] dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v3 1/1] iio: bmi323: peripheral in lowest power state on suspend
  • From: Denis Benato <benato.denis96@xxxxxxxxx>
• [PATCH v3 0/1] iio: bmi323: have the peripheral consume less power
  • From: Denis Benato <benato.denis96@xxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• RE: [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad4030: add driver for ad4030-24
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/7] iio: pressure: bmp280: Remove config error check for IIR filter updates
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 1/7] iio: pressure: bmp280: Use bulk read for humidity calibration data
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad4030: add driver for ad4030-24
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V8 2/2] iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: accel: bmc150: Improve bmc150_apply_bosc0200_acpi_orientation()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: accel: bmc150: use fwnode_irq_get_byname()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: proximity: cros_ec_mkbp_proximity: Switch to including mod_devicetable.h for struct of_device_id definition
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 10/12] dt-bindings: spi: Add rockchip,rk3576-spi compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 09/12] dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 08/12] dt-bindings: gpu: Add rockchip,rk3576-mali compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 07/12] dt-bindings: mmc: Add support for rk3576 eMMC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 04/12] dt-bindings: iio: adc: Add rockchip,rk3576-saradc string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v1 1/1] iio: accel: bmc150: Improve bmc150_apply_bosc0200_acpi_orientation()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 1/1] iio: accel: bmc150: use fwnode_irq_get_byname()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 1/1] iio: proximity: cros_ec_mkbp_proximity: Switch to including mod_devicetable.h for struct of_device_id definition
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/7] iio: pressure: bmp280: Remove config error check for IIR filter updates
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/4] iio: magnetometer: ak8975: Relax failure on unknown id
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/7] iio: adc: ad7606: add 'bits' parameter to channels macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: ad7625: add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/7] iio: pressure: bmp280: Use bulk read for humidity calibration data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] iio: magnetometer: ak8975: Add AK09118 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/4] iio: magnetometer: ak8975: Relax failure on unknown id
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: bmi323: peripheral in lowest power state on suspend
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 7/7] iio: pressure: bmp280: Move bmp085 interrupt to new configuration
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v3 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v3 5/7] dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v3 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v3 3/7] iio: pressure: bmp280: Remove config error check for IIR filter updates
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v3 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v3 1/7] iio: pressure: bmp280: Use bulk read for humidity calibration data
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v3 0/7] pressure: bmp280: Minor cleanup and interrupt support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH 7/7] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• iio: pressure: bmp280: Use char instead of s32 for data buffer
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 12/12] arm64: dts: rockchip: Add rk3576-armsom-sige5 board
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v2 11/12] arm64: dts: rockchip: Add rk3576 SoC base DT
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v2 10/12] dt-bindings: spi: Add rockchip,rk3576-spi compatible
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• Re: [PATCH 7/7] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v2 09/12] dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v2 08/12] dt-bindings: gpu: Add rockchip,rk3576-mali compatible
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v2 07/12] dt-bindings: mmc: Add support for rk3576 eMMC
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v2 06/12] dt-bindings: serial: snps-dw-apb-uart: Add Rockchip RK3576
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v2 05/12] dt-bindings: mfd: syscon: Add rk3576 QoS register compatible
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v2 04/12] dt-bindings: iio: adc: Add rockchip,rk3576-saradc string
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v2 02/12] dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v2 03/12] dt-bindings: i2c: i2c-rk3x: Add rk3576 compatible
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v2 01/12] dt-bindings: arm: rockchip: Add ArmSoM Sige 5
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v2 00/12] Add device tree for ArmSoM Sige 5 board
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH V8 1/2] dt-bindings: iio: aw96103: Add bindings for aw96103/aw96105 sensor
  • From: wangshuaijie@xxxxxxxxxx
• [PATCH V8 2/2] iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  • From: wangshuaijie@xxxxxxxxxx
• [PATCH V8 0/2] Add support for aw96103/aw96105 proximity sensor
  • From: wangshuaijie@xxxxxxxxxx
• Re: [PATCH 6/7] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 6/6] docs: iio: ad4030: add documentation
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 3/6] iio: adc: ad4030: add averaging support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 2/6] iio: adc: ad4030: add driver for ad4030-24
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PULL] IIO: 1st set of New device support features and cleanup for 6.12
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: iio: adc: add ADI ad4030, ad4630 and ad4632
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 0/6] iio: adc: ad4030: new driver for AD4030 and similar ADCs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: (subset) [PATCH V4 11/15] mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v3 2/2] leds: as3645a: use device_* to iterate over device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH 5/6] iio: adc: ad4030: add support for ad4632-16 and ad4632-24
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH 6/6] docs: iio: ad4030: add documentation
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH 3/6] iio: adc: ad4030: add averaging support
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH 2/6] iio: adc: ad4030: add driver for ad4030-24
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH 1/6] dt-bindings: iio: adc: add ADI ad4030, ad4630 and ad4632
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH 0/6] iio: adc: ad4030: new driver for AD4030 and similar ADCs
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: iio: adc: sophgo,cv18xx-saradc.yaml: Add Sophgo CV18XX SARADC binding
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH V4 05/15] dt-bindings: power: supply: axp20x: Add input-current-limit-microamp
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: pressure bmp280: Move bmp085 interrupt to new configuration
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH V4 15/15] arm64: dts: allwinner: h700: Add charger for Anbernic RG35XX
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 14/15] power: supply: axp20x_battery: add support for AXP717
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 13/15] power: supply: axp20x_usb_power: Add support for AXP717
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 12/15] iio: adc: axp20x_adc: add support for AXP717 ADC
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 11/15] mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 09/15] dt-bindings: power: supply: axp20x: Add AXP717 compatible
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 10/15] dt-bindings: power: supply: axp20x: Add AXP717 compatible
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 07/15] dt-bindings: power: supply: axp20x-battery: Add monitored-battery
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 08/15] dt-bindings: iio: adc: Add AXP717 compatible
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 05/15] dt-bindings: power: supply: axp20x: Add input-current-limit-microamp
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 06/15] power: supply: axp20x_usb_power: add input-current-limit-microamp
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 04/15] power: supply: axp20x_usb_power: Make VBUS and IIO config per device
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 03/15] power: supply: axp20x_battery: Make iio and battery config per device
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 02/15] power: supply: axp20x_battery: Remove design from min and max voltage
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 01/15] iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V4 00/15] Add Battery and USB Supply for AXP717
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v2 6/7] iio: pressure: bmp280: Add data ready trigger support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v2 4/7] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v2 2/7] iio: pressure: bmp280: Add support for bmp280 soft reset
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v2 1/7] iio: pressure: bmp280: Use bulk read for humidity calibration data
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1] drivers:iio:Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: sgp40: retain documentation in driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/7] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3 05/15] dt-bindings: power: supply: axp20x: Add input-current-limit-microamp
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: st,stm32-adc: add top-level constraints
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: adc: ad4695: implement calibration support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: adc: ad4695: implement calibration support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: iio: adc: sophgo,cv18xx-saradc.yaml: Add Sophgo CV18XX SARADC binding
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: adc: ad4695: implement calibration support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v1] drivers:iio:Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
  • From: Yang Ruibin <11162571@xxxxxxxx>
• [PATCH] iio: sgp40: retain documentation in driver
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: iio: adc: sophgo,cv18xx-saradc.yaml: Add Sophgo CV18XX SARADC binding
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH V3 05/15] dt-bindings: power: supply: axp20x: Add input-current-limit-microamp
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: adc: ad4695: implement calibration support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: ad7625: add driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• Re: [PATCH V3 14/15] power: supply: axp20x_battery: add support for AXP717
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [PATCH V3 05/15] dt-bindings: power: supply: axp20x: Add input-current-limit-microamp
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [PATCH 09/10] arm64: dts: rockchip: Add rk3576 SoC base DT
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v3 2/2] leds: as3645a: use device_* to iterate over device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v3 1/2] iio: adc: xilinx-ams: use device_* to iterate over device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v3 0/2] use device_for_each_child_node_scoped to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: iio: adc: sophgo,cv18xx-saradc.yaml: Add Sophgo CV18XX SARADC binding
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: iio: adc: sophgo,cv18xx-saradc.yaml: Add Sophgo CV18XX SARADC binding
  • From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
• [PATCH 4/4] iio: ABI: document ad4695 new attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 2/4] iio: adc: ad4695: implement calibration support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 3/4] doc: iio: ad4695: update for calibration support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 1/4] iio: adc: ad4695: add 2nd regmap for 16-bit registers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 0/4] iio: adc: ad4695: implement calibration support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] iio: ABI: remove duplicate in_resistance_calibbias
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 09/10] arm64: dts: rockchip: Add rk3576 SoC base DT
  • From: Johan Jonker <jbx6244@xxxxxxxxxx>
• Re: [PATCH V3 05/15] dt-bindings: power: supply: axp20x: Add input-current-limit-microamp
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: ad7625: add driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH V3 14/15] power: supply: axp20x_battery: add support for AXP717
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 6/7] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH V3 14/15] power: supply: axp20x_battery: add support for AXP717
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 09/10] arm64: dts: rockchip: Add rk3576 SoC base DT
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [bug report] iio: pressure: bmp280: Add triggered buffer support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH 09/10] arm64: dts: rockchip: Add rk3576 SoC base DT
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] iio: ABI: audit calibscal and calibbias attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PULL] IIO: 1st set of fixes for 6.11
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/10] arm64: dts: rockchip: Add rk3576 SoC base DT
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: st,stm32-adc: add top-level constraints
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH V3 15/15] arm64: dts: allwinner: h700: Add charger for Anbernic RG35XX
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 14/15] power: supply: axp20x_battery: add support for AXP717
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 13/15] power: supply: axp20x_usb_power: Add support for AXP717
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 12/15] iio: adc: axp20x_adc: add support for AXP717 ADC
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 11/15] mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 10/15] dt-bindings: power: supply: axp20x: Add AXP717 compatible
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 09/15] dt-bindings: power: supply: axp20x: Add AXP717 compatible
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 08/15] dt-bindings: iio: adc: Add AXP717 compatible
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 06/15] power: supply: axp20x_usb_power: add input-current-limit-microamp
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 07/15] dt-bindings: power: supply: axp20x-battery: Add monitored-battery
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 05/15] dt-bindings: power: supply: axp20x: Add input-current-limit-microamp
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 04/15] power: supply: axp20x_usb_power: Make VBUS and IIO config per device
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 03/15] power: supply: axp20x_battery: Make iio and battery config per device
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 02/15] power: supply: axp20x_battery: Remove design from min and max voltage
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 01/15] iio: adc: axp20x_adc: Add adc_en1 and adc_en1 to axp_data
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH V3 00/15] Add Battery and USB Supply for AXP717
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adc: add AD762x/AD796x ADCs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 7/7] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 7/7] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 0/3] use device_for_each_child_node_scoped to access device child nodes
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCH v3 2/3] iio: adc: ad7625: add driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• [PATCH v3 3/3] docs: iio: new docs for ad7625 driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• [PATCH v3 0/3] iio: adc: add new ad7625 driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: adc: add AD762x/AD796x ADCs
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: st,stm32-adc: add top-level constraints
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH 6/7] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc: ad7625: add driver
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] coresight: cti: use device_* to iterate over device child nodes
  • From: Mike Leach <mike.leach@xxxxxxxxxx>
• Re: [PATCH 08/10] dt-bindings: timer: rockchip: Add rk3576 compatible
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH 7/7] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH 6/7] dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH 5/7] iio: adc: ad7606: rework available attributes for SW channels
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH 4/7] iio: adc: ad7606: wrap channel ranges & scales into struct
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH 3/7] iio: adc: ad7606: split a 'ad7606_sw_mode_setup()' from probe
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH 2/7] iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct()
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH 1/7] iio: adc: ad7606: add 'bits' parameter to channels macros
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH 0/7] iio: adc: ad7606: add support for AD7606C-{16,18} parts
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v4 3/4] dt-bindings: iio: magnetometer: Add ak09118
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v4 4/4] iio: magnetometer: ak8975: Add AK09118 support
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v4 2/4] iio: magnetometer: ak8975: Fix reading for ak099xx sensors
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v4 3/4] dt-bindings: iio: magnetometer: Add ak09118
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v4 1/4] iio: magnetometer: ak8975: Relax failure on unknown id
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH v4 0/4] Add support for AK09918
  • From: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: standardize on formatting for id match tables
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: st,stm32-adc: add top-level constraints
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 0/2] Add light channel for LTR390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: bmi323: peripheral in lowest power state on suspend
  • From: Denis Benato <benato.denis96@xxxxxxxxx>
• [PATCH v2 0/1] iio: bmi323: have the peripheral consume less power
  • From: Denis Benato <benato.denis96@xxxxxxxxx>
• Re: st_lsm6dsx minor issue
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: dac: add docs for ad8460
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7606: split a 'ad7606_sw_mode_setup()' from probe
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v7 0/2] Add light channel for LTR390
  • From: Abhash jha <abhashkumarjha123@xxxxxxxxx>
• Re: [PATCH v7 0/2] Add light channel for LTR390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: st_lsm6dsx minor issue
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: iio: accel: adxl345 - Questions on Implementation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: imu: smi240: imu driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: imu: smi240: imu driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 0/2] Add light channel for LTR390
  • From: Abhash jha <abhashkumarjha123@xxxxxxxxx>
• Re: [PATCH 8/8] iio:adc:ad7606: Add iio-backend support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/8] iio: adc: ad7606: Switch to xxx_get_device_match_data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/8] iio: adc: ad7606: Add PWM support for conversion trigger
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/8] platform: add platform_get_device_match_data() helper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/8] Documentation: iio: Document ad7606 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/8] dt-bindings: iio: adc: ad7606: Add iio backend bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: iio: adc: ad7606: Make corrections on spi conditions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7606: split a 'ad7606_sw_mode_setup()' from probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/4] iio: ABI: audit calibscal and calibbias attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [bug report] iio: pressure: bmp280: Add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: ad7606: split a 'ad7606_sw_mode_setup()' from probe
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v7 0/2] Add light channel for LTR390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct()
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct()
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: adc: ad4695: implement triggered buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct()
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: adc: ad4695: implement triggered buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: proximity: Add support for everlight pmd16d17 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: Add everlight pm16d17 binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: adc: sophgo-saradc: Add driver for Sophgo CV18XX series SARADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: magnetometer: ak8975: Fix reading for ak099xx sensors
  • From: barnabas.czeman@xxxxxxxxxxxxxx
• Re: [PATCH] iio: proximity: hx9023s: Fix error code in hx9023s_property_get()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: bmi323: peripheral in lowest power state on suspend
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] dt-bindings: iio: imu: magnetometer: Add ak09118
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] dt-bindings: iio: imu: magnetometer: Add ak09118
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: magnetometer: ak8975: Fix reading for ak099xx sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [PATCH v2 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: "Tinaco, Mariel" <Mariel.Tinaco@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc: ad7625: add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5449: drop support for platform data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V7 1/2] dt-bindings: iio: aw96103: Add bindings for aw96103/aw96105 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V7 2/2] iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [PATCH v2 1/2] dt-bindings: iio: dac: add docs for ad8460
  • From: "Tinaco, Mariel" <Mariel.Tinaco@xxxxxxxxxx>
• RE: [PATCH v2 1/2] dt-bindings: iio: dac: add docs for ad8460
  • From: "Tinaco, Mariel" <Mariel.Tinaco@xxxxxxxxxx>
• Re: [PATCH V6 2/2] iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V6 1/2] dt-bindings: iio: aw96103: Add bindings for aw96103/aw96105 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: noa1305: Fix up integration time look up
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7173: fix GPIO device info
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/3] Add support for AD4113
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: adc: ad7173: add support for ad4113
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: humidity: Add support for ENS210
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 14/15] power: supply: axp20x_battery: add support for AXP717
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/10] arm64: dts: rockchip: Add rk3576 SoC base DT
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: imu: smi240: imu driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: Add everlight pm16d17 binding
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 3/3] leds: as3645a: use device_* to iterate over device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: imu: smi240: devicetree binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: Add everlight pm16d17 binding
  • From: "Li, Hua Qian" <HuaQian.Li@xxxxxxxxxxx>
• Re: [PATCH 3/3] iio: proximity: Add support for everlight pmd16d17 sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: (subset) [PATCH 0/3] KX022-1020 accel support + inertial sensors on msm8226-microsoft
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH 4/4] iio: ABI: add missing calibbias attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 3/4] iio: ABI: add missing calibscale attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 0/4] iio: ABI: audit calibscal and calibbias attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 2/4] iio: ABI: sort calibscale attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 1/4] iio: ABI: document calibscale_available attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 0/8] Add iio backend compatibility for ad7606
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: imu: smi240: devicetree binding
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: imu: smi240: devicetree binding
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v3 2/2] iio: imu: smi240: imu driver
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: imu: smi240: devicetree binding
  • From: <Jianping.Shen@xxxxxxxxxxxx>
• [PATCH v3 0/2] iio: imu: smi240: cover-letter
  • From: <Jianping.Shen@xxxxxxxxxxxx>