Re: [PATCH v2 0/3] iio: magnetometer: add support for the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 21 Oct 2024 14:38:52 +0200
Neil Armstrong <neil.armstrong@xxxxxxxxxx> wrote:

> The Allegro MicroSystems ALS31300 is a 3-D Linear Hall Effect Sensor
> mainly used in 3D sensing applications for head-on motion.
> 
> The device is configured over I2C, and as part of the Sensor
> data the temperature core is also provided.
> 
> While the device provides an IRQ gpio, it depends on a configuration
> programmed into the internal EEPROM, thus only the default mode
> is supported and buffered input via trigger is also supported
> to allow streaming values with the same sensing timestamp.
> 
> The device can be configured with different sensitivities in factory,
> but the sensitivity value used to calculate value into the Gauss
> unit is not available from registers, thus the sensitivity is
> provided by the compatible/device-id string which is based
> on the part number as described in the datasheet page 2.
>     
> The datasheet is available on the product website at [1].
> 
> [1] https://www.allegromicro.com/en/products/sense/linear-and-angular-position/linear-position-sensor-ics/als31300
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
Nice work. Applied to the togreg branch of iio.git and pushed out as testing
to let 0-day take a first look at it.

Thanks,

Jonathan




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux