On Mon, Oct 21, 2024 at 02:40:12PM +0200, Angelo Dureghello wrote: > From: Angelo Dureghello <adureghello@xxxxxxxxxxxx> > > Add a new compatible and related bindigns for the fpga-based > "ad3552r" AXI IP core, a variant of the generic AXI DAC IP. > > The AXI "ad3552r" IP is a very similar HDL (fpga) variant of the > generic AXI "DAC" IP, intended to control ad3552r and similar chips, > mainly to reach high speed transfer rates using a QSPI DDR > (dobule-data-rate) interface. > > The ad3552r device is defined as a child of the AXI DAC, that in > this case is acting as an SPI controller. > > Note, #io-backend is present because it is possible (in theory anyway) > to use a separate controller for the control path than that used > for the datapath. > > Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx> > --- > .../devicetree/bindings/iio/dac/adi,axi-dac.yaml | 69 +++++++++++++++++++++- > 1 file changed, 66 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml > index a55e9bfc66d7..0aabb210f26d 100644 > --- a/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml > +++ b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml > @@ -19,11 +19,13 @@ description: | > memory via DMA into the DAC. > > https://wiki.analog.com/resources/fpga/docs/axi_dac_ip > + https://analogdevicesinc.github.io/hdl/library/axi_ad3552r/index.html > > properties: > compatible: > enum: > - adi,axi-dac-9.1.b > + - adi,axi-ad3552r > > reg: > maxItems: 1 > @@ -36,7 +38,12 @@ properties: > - const: tx > > clocks: > - maxItems: 1 > + minItems: 1 > + maxItems: 2 > + > + clock-names: > + minItems: 1 > + maxItems: 2 > > '#io-backend-cells': > const: 0 > @@ -47,7 +54,31 @@ required: > - reg > - clocks > > -additionalProperties: false > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: adi,axi-ad3552r > + then: > + $ref: /schemas/spi/spi-controller.yaml# > + properties: > + clocks: > + minItems: 2 > + maxItems: 2 Is this maxItems required? It matches the outer maximum. > + clock-names: > + items: > + - const: s_axi_aclk > + - const: dac_clk The names are the same in both cases, you can move the definitions outside of the if/then/else stuff and only constrain it here. > + else: > + properties: > + clocks: > + maxItems: 1 > + clock-names: > + items: > + - const: s_axi_aclk > + > +unevaluatedProperties: false > > examples: > - | > @@ -57,6 +88,38 @@ examples: > dmas = <&tx_dma 0>; > dma-names = "tx"; > #io-backend-cells = <0>; > - clocks = <&axi_clk>; > + clocks = <&clkc 15>; > + clock-names = "s_axi_aclk"; > + }; > + > + - | > + #include <dt-bindings/gpio/gpio.h> > + axi_dac: spi@44a70000 { > + compatible = "adi,axi-ad3552r"; > + reg = <0x44a70000 0x1000>; > + dmas = <&dac_tx_dma 0>; > + dma-names = "tx"; > + #io-backend-cells = <0>; > + clocks = <&clkc 15>, <&ref_clk>; > + clock-names = "s_axi_aclk", "dac_clk"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + dac@0 { > + compatible = "adi,ad3552r"; > + reg = <0>; > + reset-gpios = <&gpio0 92 GPIO_ACTIVE_HIGH>; > + io-backends = <&axi_dac>; > + spi-max-frequency = <20000000>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + channel@0 { > + reg = <0>; > + adi,output-range-microvolt = <(-10000000) (10000000)>; > + }; > + }; > }; > ... > > -- > 2.45.0.rc1 >
Attachment:
signature.asc
Description: PGP signature
