Add support for Texas Instruments OPT4060 RGBW Color sensor. Signed-off-by: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx> --- .../ABI/testing/sysfs-bus-iio-light-opt4060 | 66 + drivers/iio/light/Kconfig | 13 + drivers/iio/light/Makefile | 1 + drivers/iio/light/opt4060.c | 1282 +++++++++++++++++ 4 files changed, 1362 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-light-opt4060 create mode 100644 drivers/iio/light/opt4060.c diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-opt4060 b/Documentation/ABI/testing/sysfs-bus-iio-light-opt4060 new file mode 100644 index 000000000000..187e750602ee --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-light-opt4060 @@ -0,0 +1,66 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_raw +KernelVersion: +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Unit-less raw value for red intensity. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_scale +KernelVersion: +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Decimal value for the red component of the light. The value + is normalized to give the relative red component + independently of the light intensity. The raw value for red + is multiplied by 2.4 before being normalized, this to adapt + to the relative sensitivity of the red filter of the sensor. + The factor for green is 1.0 and the factor for blue is 1.3. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_raw +KernelVersion: +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Unit-less raw value for green intensity. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_scale +KernelVersion: +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Decimal value for the green component of the light. The + value is normalized to give the relative green component + independently of the light intensity. The raw value for + green is multiplied by 1.0 before being normalized, this to + adapt to the relative sensitivity of the green filter of + the sensor. The factor for red is 2.4 and the factor for + blue is 1.3. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_raw +KernelVersion: +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Unit-less raw value for blue intensity. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_scale +KernelVersion: +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Decimal value for the blue component of the light. The + value is normalized to give the relative blue component + independently of the light intensity. The raw value for + blue is multiplied by 1.3 before being normalized, this to + adapt to the relative sensitivity of the blue filter of the + sensor. The factor for red is 2.4 and the factor for green + is 1.0. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_clear_raw +KernelVersion: +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Unit-less raw value for clear intensity. + +What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_input +KernelVersion: +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + Lux value for the light illuminance. The value is + calculated using the wide spectrum green channel and + multiplied by 2.15e-3. diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 29ffa8491927..96cd26d95af9 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -491,6 +491,19 @@ config OPT4001 If built as a dynamically linked module, it will be called opt4001. +config OPT4060 + tristate "Texas Instruments OPT4060 RGBW Color Sensor" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say Y or M here, you get support for Texas Instruments + OPT4060 RGBW Color Sensor. + + If built as a dynamically linked module, it will be called + opt4060. + config PA12203001 tristate "TXC PA12203001 light and proximity sensor" depends on I2C diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index f14a37442712..0ea5e6348878 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_MAX44009) += max44009.o obj-$(CONFIG_NOA1305) += noa1305.o obj-$(CONFIG_OPT3001) += opt3001.o obj-$(CONFIG_OPT4001) += opt4001.o +obj-$(CONFIG_OPT4060) += opt4060.o obj-$(CONFIG_PA12203001) += pa12203001.o obj-$(CONFIG_ROHM_BU27008) += rohm-bu27008.o obj-$(CONFIG_ROHM_BU27034) += rohm-bu27034.o diff --git a/drivers/iio/light/opt4060.c b/drivers/iio/light/opt4060.c new file mode 100644 index 000000000000..218ca3fd74f5 --- /dev/null +++ b/drivers/iio/light/opt4060.c @@ -0,0 +1,1282 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2024 Axis Communications AB + * + * Datasheet: https://www.ti.com/lit/gpn/opt4060 + * + * Device driver for the Texas Instruments OPT4060 RGBW Color Sensor. + */ + +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/iio/iio.h> +#include <linux/math64.h> +#include <linux/units.h> +#include <linux/limits.h> +#include <linux/module.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/iio/events.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +/* OPT4060 register set */ +#define OPT4060_RED_MSB 0x00 +#define OPT4060_RED_LSB 0x01 +#define OPT4060_GREEN_MSB 0x02 +#define OPT4060_GREEN_LSB 0x03 +#define OPT4060_BLUE_MSB 0x04 +#define OPT4060_BLUE_LSB 0x05 +#define OPT4060_CLEAR_MSB 0x06 +#define OPT4060_CLEAR_LSB 0x07 +#define OPT4060_THRESHOLD_LOW 0x08 +#define OPT4060_THRESHOLD_HIGH 0x09 +#define OPT4060_CTRL 0x0a +#define OPT4060_INT_CTRL 0x0b +#define OPT4060_RES_CTRL 0x0c +#define OPT4060_DEVICE_ID 0x11 + +/* OPT4060 register mask */ +#define OPT4060_EXPONENT_MASK GENMASK(15, 12) +#define OPT4060_MSB_MASK GENMASK(11, 0) +#define OPT4060_LSB_MASK GENMASK(15, 8) +#define OPT4060_COUNTER_MASK GENMASK(7, 4) +#define OPT4060_CRC_MASK GENMASK(3, 0) + +/* OPT4060 device id mask */ +#define OPT4060_DEVICE_ID_MASK GENMASK(11, 0) + +/* OPT4060 control register masks */ +#define OPT4060_CTRL_QWAKE_MASK BIT(15) +#define OPT4060_CTRL_RANGE_MASK GENMASK(13, 10) +#define OPT4060_CTRL_CONV_TIME_MASK GENMASK(9, 6) +#define OPT4060_CTRL_OPER_MODE_MASK GENMASK(5, 4) +#define OPT4060_CTRL_LATCH_MASK BIT(3) +#define OPT4060_CTRL_INT_POL_MASK BIT(2) +#define OPT4060_CTRL_FAULT_COUNT_MASK GENMASK(1, 0) + +/* OPT4060 interrupt control register masks */ +#define OPT4060_INT_CTRL_THRESH_SEL GENMASK(6, 5) +#define OPT4060_INT_CTRL_OUTPUT BIT(4) +#define OPT4060_INT_CTRL_INT_CFG GENMASK(3, 2) +#define OPT4060_INT_CTRL_THRESHOLD 0x0 +#define OPT4060_INT_CTRL_NEXT_CH 0x1 +#define OPT4060_INT_CTRL_ALL_CH 0x3 + +/* OPT4060 result control register masks */ +#define OPT4060_RES_CTRL_OVERLOAD BIT(3) +#define OPT4060_RES_CTRL_CONV_READY BIT(2) +#define OPT4060_RES_CTRL_FLAG_H BIT(1) +#define OPT4060_RES_CTRL_FLAG_L BIT(0) + +/* OPT4060 constants */ +#define OPT4060_DEVICE_ID_VAL 0x821 + +/* OPT4060 operating modes */ +#define OPT4060_CTRL_OPER_MODE_OFF 0x0 +#define OPT4060_CTRL_OPER_MODE_FORCED 0x1 +#define OPT4060_CTRL_OPER_MODE_ONE_SHOT 0x2 +#define OPT4060_CTRL_OPER_MODE_CONTINUOUS 0x3 + +/* OPT4060 conversion control register definitions */ +#define OPT4060_CTRL_CONVERSION_0_6MS 0x0 +#define OPT4060_CTRL_CONVERSION_1MS 0x1 +#define OPT4060_CTRL_CONVERSION_1_8MS 0x2 +#define OPT4060_CTRL_CONVERSION_3_4MS 0x3 +#define OPT4060_CTRL_CONVERSION_6_5MS 0x4 +#define OPT4060_CTRL_CONVERSION_12_7MS 0x5 +#define OPT4060_CTRL_CONVERSION_25MS 0x6 +#define OPT4060_CTRL_CONVERSION_50MS 0x7 +#define OPT4060_CTRL_CONVERSION_100MS 0x8 +#define OPT4060_CTRL_CONVERSION_200MS 0x9 +#define OPT4060_CTRL_CONVERSION_400MS 0xa +#define OPT4060_CTRL_CONVERSION_800MS 0xb + +/* OPT4060 fault count control register definitions */ +#define OPT4060_CTRL_FAULT_COUNT_1 0x0 +#define OPT4060_CTRL_FAULT_COUNT_2 0x1 +#define OPT4060_CTRL_FAULT_COUNT_4 0x2 +#define OPT4060_CTRL_FAULT_COUNT_8 0x3 + +/* OPT4060 scale light level range definitions */ +#define OPT4060_CTRL_LIGHT_SCALE_AUTO 12 + +/* OPT4060 default values */ +#define OPT4060_DEFAULT_CONVERSION_TIME OPT4060_CTRL_CONVERSION_50MS + +/* + * enum opt4060_chan_type - OPT4060 channel types + * @OPT4060_RED: Red channel. + * @OPT4060_GREEN: Green channel. + * @OPT4060_BLUE: Blue channel. + * @OPT4060_CLEAR: Clear (white) channel. + * @OPT4060_ILLUM: Calculated illuminance channel. + * @OPT4060_NUM_CHANS: Number of channel types. + */ +enum opt4060_chan_type { + OPT4060_RED, + OPT4060_GREEN, + OPT4060_BLUE, + OPT4060_CLEAR, + OPT4060_ILLUM, + OPT4060_NUM_CHANS +}; + +struct opt4060_chip { + struct regmap *regmap; + struct device *dev; + struct iio_trigger *trig; + u8 int_time; + int irq; + struct completion completion; + bool thresh_event_lo_active; + bool thresh_event_hi_active; +}; + +struct opt4060_channel_factor { + u32 mul; + u32 div; +}; + +struct opt4060_buffer { + u32 chan[OPT4060_NUM_CHANS]; + aligned_s64 ts; +}; + +static const int opt4060_int_time_available[][2] = { + { 0, 600 }, + { 0, 1000 }, + { 0, 1800 }, + { 0, 3400 }, + { 0, 6500 }, + { 0, 12700 }, + { 0, 25000 }, + { 0, 50000 }, + { 0, 100000 }, + { 0, 200000 }, + { 0, 400000 }, + { 0, 800000 }, +}; + +/* + * Conversion time is integration time + time to set register + * this is used as integration time. + */ +static const int opt4060_int_time_reg[][2] = { + { 600, OPT4060_CTRL_CONVERSION_0_6MS }, + { 1000, OPT4060_CTRL_CONVERSION_1MS }, + { 1800, OPT4060_CTRL_CONVERSION_1_8MS }, + { 3400, OPT4060_CTRL_CONVERSION_3_4MS }, + { 6500, OPT4060_CTRL_CONVERSION_6_5MS }, + { 12700, OPT4060_CTRL_CONVERSION_12_7MS }, + { 25000, OPT4060_CTRL_CONVERSION_25MS }, + { 50000, OPT4060_CTRL_CONVERSION_50MS }, + { 100000, OPT4060_CTRL_CONVERSION_100MS }, + { 200000, OPT4060_CTRL_CONVERSION_200MS }, + { 400000, OPT4060_CTRL_CONVERSION_400MS }, + { 800000, OPT4060_CTRL_CONVERSION_800MS }, +}; + +static int opt4060_als_time_to_index(const u32 als_integration_time) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(opt4060_int_time_available); i++) { + if (als_integration_time == opt4060_int_time_available[i][1]) + return i; + } + + return -EINVAL; +} + +static u8 opt4060_calculate_crc(u8 exp, u32 mantissa, u8 count) +{ + u8 crc; + + /* + * Calculates a 4-bit CRC from a 20-bit mantissa, 4-bit exponent and a 4-bit counter. + * crc[0] = XOR(mantissa[19:0], exp[3:0], count[3:0]) + * crc[1] = XOR(mantissa[1,3,5,7,9,11,13,15,17,19], exp[1,3], count[1,3]) + * crc[2] = XOR(mantissa[3,7,11,15,19], exp[3], count[3]) + * crc[3] = XOR(mantissa[3,11,19]) + */ + crc = (hweight32(mantissa) + hweight32(exp) + hweight32(count)) % 2; + crc |= ((hweight32(mantissa & 0xAAAAA) + hweight32(exp & 0xA) + + hweight32(count & 0xA)) % 2) << 1; + crc |= ((hweight32(mantissa & 0x88888) + hweight32(exp & 0x8) + + hweight32(count & 0x8)) % 2) << 2; + crc |= (hweight32(mantissa & 0x80808) % 2) << 3; + + return crc; +} + +static int opt4060_set_int_state(struct opt4060_chip *chip, u32 state) +{ + int ret; + unsigned int regval; + + regval = FIELD_PREP(OPT4060_INT_CTRL_INT_CFG, state); + ret = regmap_update_bits(chip->regmap, OPT4060_INT_CTRL, + OPT4060_INT_CTRL_INT_CFG, regval); + if (ret) + dev_err(chip->dev, "Failed to set interrupt config\n"); + return ret; +} + +static int opt4060_trigger_one_shot(struct opt4060_chip *chip) +{ + int ret; + unsigned int ctrl_reg; + + /* Enable interrupt for conversion ready of all channels */ + ret = opt4060_set_int_state(chip, OPT4060_INT_CTRL_ALL_CH); + if (ret) + return ret; + + ret = regmap_read(chip->regmap, OPT4060_CTRL, &ctrl_reg); + if (ret < 0) { + dev_err(chip->dev, "Failed to read ctrl register\n"); + return ret; + } + + /* If the device is already in continuous mode, one-shot is not needed. */ + if (FIELD_GET(OPT4060_CTRL_OPER_MODE_MASK, ctrl_reg) == + OPT4060_CTRL_OPER_MODE_CONTINUOUS) + return 0; + + ctrl_reg &= ~OPT4060_CTRL_OPER_MODE_MASK; + ctrl_reg |= FIELD_PREP(OPT4060_CTRL_OPER_MODE_MASK, + OPT4060_CTRL_OPER_MODE_ONE_SHOT); + + /* Trigger a new conversion by writing to CRTL register. */ + ret = regmap_write(chip->regmap, OPT4060_CTRL, ctrl_reg); + if (ret) + dev_err(chip->dev, "Failed to set ctrl register\n"); + return ret; +} + +static int opt4060_set_continous_mode(struct opt4060_chip *chip, + bool continuous) +{ + u16 reg; + int ret; + + if (continuous) + reg = FIELD_PREP(OPT4060_CTRL_OPER_MODE_MASK, + OPT4060_CTRL_OPER_MODE_CONTINUOUS); + else + reg = FIELD_PREP(OPT4060_CTRL_OPER_MODE_MASK, + OPT4060_CTRL_OPER_MODE_ONE_SHOT); + + ret = regmap_update_bits(chip->regmap, OPT4060_CTRL, + OPT4060_CTRL_OPER_MODE_MASK, reg); + if (ret) + dev_err(chip->dev, "Failed to set configuration\n"); + + return ret; +} + +static int opt4060_read_raw_value(struct opt4060_chip *chip, + unsigned long address, u32 *raw) +{ + int ret; + u16 result[2]; + u32 mantissa_raw; + u16 msb, lsb; + u8 exp, count, crc, calc_crc; + + ret = regmap_bulk_read(chip->regmap, address, result, 2); + if (ret) { + dev_err(chip->dev, "Reading channel data failed\n"); + return ret; + } + exp = FIELD_GET(OPT4060_EXPONENT_MASK, result[0]); + msb = FIELD_GET(OPT4060_MSB_MASK, result[0]); + count = FIELD_GET(OPT4060_COUNTER_MASK, result[1]); + crc = FIELD_GET(OPT4060_CRC_MASK, result[1]); + lsb = FIELD_GET(OPT4060_LSB_MASK, result[1]); + mantissa_raw = (msb << 8) + lsb; + calc_crc = opt4060_calculate_crc(exp, mantissa_raw, count); + if (calc_crc != crc) + return -EIO; + *raw = mantissa_raw << exp; + return 0; +} + +static int opt4060_trigger_new_samples(struct iio_dev *indio_dev) +{ + struct opt4060_chip *chip = iio_priv(indio_dev); + int ret; + + /* + * The conversion time should be 500us startup time plus the integration time + * times the number of channels. An exact timeout isn't critical, it's better + * not to get incorrect errors in the log. Setting the timeout to double the + * theoretical time plus and extra 100ms margin. + */ + unsigned int timeout_us = (500 + OPT4060_NUM_CHANS * + opt4060_int_time_reg[chip->int_time][0]) * 2 + 100000; + + if (chip->irq) { + reinit_completion(&chip->completion); + ret = opt4060_trigger_one_shot(chip); + if (ret) + return ret; + if (wait_for_completion_timeout(&chip->completion, + usecs_to_jiffies(timeout_us)) == 0) { + dev_err(chip->dev, "Completion timed out.\n"); + return -ETIME; + } + /* + * The opt4060_trigger_one_shot() function will enable irq on + * every conversion. If the buffer isn't enabled, irq should + * only be enabled for thresholds. + */ + if (!iio_buffer_enabled(indio_dev)) { + ret = opt4060_set_int_state(chip, OPT4060_INT_CTRL_THRESHOLD); + if (ret) + return ret; + } + } else { + unsigned int ready; + + ret = opt4060_trigger_one_shot(chip); + if (ret) + return ret; + + ret = regmap_read_poll_timeout(chip->regmap, OPT4060_RES_CTRL, + ready, (ready & OPT4060_RES_CTRL_CONV_READY), + 1000, timeout_us); + if (ret) + dev_err(chip->dev, "Conversion ready did not finish within timeout.\n"); + } + return ret; +} + +static int opt4060_read_chan_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val) +{ + struct opt4060_chip *chip = iio_priv(indio_dev); + u32 adc_raw; + int ret; + + ret = opt4060_trigger_new_samples(indio_dev); + if (ret) { + dev_err(chip->dev, "Failed to trigger new samples.\n"); + return ret; + } + + ret = opt4060_read_raw_value(chip, chan->address, &adc_raw); + if (ret) { + dev_err(chip->dev, "Reading raw channel data failed.\n"); + return ret; + } + *val = adc_raw; + return IIO_VAL_INT; +} + +/* + * Function for calculating color components independent of light intensity. The + * raw values are multiplied by individual factors that correspond to the + * sensitivity of the different color filters. The returned value is normalized. + */ +static int opt4060_read_chan_scale(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2) +{ + struct opt4060_chip *chip = iio_priv(indio_dev); + static const u32 color_factors[] = { 24, 10, 13 }; + u32 adc_raw[3], sum = 0, rem; + int ret; + + ret = opt4060_trigger_new_samples(indio_dev); + if (ret) { + dev_err(chip->dev, "Failed to trigger new samples.\n"); + return ret; + } + + for (int color = OPT4060_RED; color <= OPT4060_BLUE; color++) { + ret = opt4060_read_raw_value(chip, indio_dev->channels[color].address, + &(adc_raw[color])); + if (ret) { + dev_err(chip->dev, "Reading raw channel data failed\n"); + return ret; + } + adc_raw[color] *= color_factors[color]; + sum += adc_raw[color]; + } + *val = div_u64_rem((u64)adc_raw[chan->scan_index], sum, &rem); + *val2 = DIV_U64_ROUND_CLOSEST((u64)(rem * MICRO), sum); + return IIO_VAL_INT_PLUS_MICRO; +} + +static int opt4060_calc_illuminance(struct opt4060_chip *chip, int *val) +{ + u32 lux_raw; + int ret; + + /* The green wide spectral channel is used for illuminance. */ + ret = opt4060_read_raw_value(chip, OPT4060_GREEN_MSB, &lux_raw); + if (ret) { + dev_err(chip->dev, "Reading raw channel data failed\n"); + return ret; + } + + /* Illuminance is calculated by ADC_RAW * 2.15e-3. */ + *val = DIV_U64_ROUND_CLOSEST((u64)(lux_raw * 215), 1000); + return ret; +} + +static int opt4060_read_illuminance(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val) +{ + struct opt4060_chip *chip = iio_priv(indio_dev); + int ret; + + ret = opt4060_trigger_new_samples(indio_dev); + if (ret) { + dev_err(chip->dev, "Failed to trigger new samples.\n"); + return ret; + } + ret = opt4060_calc_illuminance(chip, val); + if (ret) { + dev_err(chip->dev, "Failed to calculate illuminance.\n"); + return ret; + } + + return IIO_VAL_INT; +} + +static int opt4060_set_int_time(struct opt4060_chip *chip) +{ + unsigned int regval; + int ret; + + regval = FIELD_PREP(OPT4060_CTRL_CONV_TIME_MASK, chip->int_time); + ret = regmap_update_bits(chip->regmap, OPT4060_CTRL, + OPT4060_CTRL_CONV_TIME_MASK, regval); + if (ret) + dev_err(chip->dev, "Failed to set integration time.\n"); + + return ret; +} + +static int opt4060_power_down(struct opt4060_chip *chip) +{ + int ret; + + ret = regmap_clear_bits(chip->regmap, OPT4060_CTRL, OPT4060_CTRL_OPER_MODE_MASK); + if (ret) + dev_err(chip->dev, "Failed to power down\n"); + + return ret; +} + +static void opt4060_chip_off_action(void *chip) +{ + opt4060_power_down(chip); +} + +#define _OPT4060_COLOR_CHANNEL(_color, _mask, _ev_spec, _num_ev_spec) \ +{ \ + .type = IIO_INTENSITY, \ + .modified = 1, \ + .channel2 = IIO_MOD_LIGHT_##_color, \ + .info_mask_separate = _mask, \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), \ + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME), \ + .address = OPT4060_##_color##_MSB, \ + .scan_index = OPT4060_##_color, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 32, \ + .storagebits = 32, \ + .endianness = IIO_CPU, \ + }, \ + .event_spec = _ev_spec, \ + .num_event_specs = _num_ev_spec, \ +} + +#define OPT4060_COLOR_CHANNEL(_color, _mask) \ + _OPT4060_COLOR_CHANNEL(_color, _mask, opt4060_event_spec, \ + ARRAY_SIZE(opt4060_event_spec)) \ + +#define OPT4060_COLOR_CHANNEL_NO_EVENTS(_color, _mask) \ + _OPT4060_COLOR_CHANNEL(_color, _mask, NULL, 0) \ + +#define OPT4060_LIGHT_CHANNEL(_channel) \ +{ \ + .type = IIO_LIGHT, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), \ + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME), \ + .scan_index = OPT4060_##_channel, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 32, \ + .storagebits = 32, \ + .endianness = IIO_CPU, \ + }, \ +} + +static const struct iio_event_spec opt4060_event_spec[] = { + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_RISING, + .mask_separate = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_ENABLE), + }, { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_ENABLE), + }, { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_EITHER, + .mask_separate = BIT(IIO_EV_INFO_PERIOD), + }, +}; + +static const struct iio_chan_spec opt4060_channels[] = { + OPT4060_COLOR_CHANNEL(RED, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)), + OPT4060_COLOR_CHANNEL(GREEN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)), + OPT4060_COLOR_CHANNEL(BLUE, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)), + OPT4060_COLOR_CHANNEL(CLEAR, BIT(IIO_CHAN_INFO_RAW)), + OPT4060_LIGHT_CHANNEL(ILLUM), + IIO_CHAN_SOFT_TIMESTAMP(OPT4060_NUM_CHANS), +}; + +static const struct iio_chan_spec opt4060_channels_no_events[] = { + OPT4060_COLOR_CHANNEL_NO_EVENTS(RED, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)), + OPT4060_COLOR_CHANNEL_NO_EVENTS(GREEN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)), + OPT4060_COLOR_CHANNEL_NO_EVENTS(BLUE, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)), + OPT4060_COLOR_CHANNEL_NO_EVENTS(CLEAR, BIT(IIO_CHAN_INFO_RAW)), + OPT4060_LIGHT_CHANNEL(ILLUM), + IIO_CHAN_SOFT_TIMESTAMP(OPT4060_NUM_CHANS), +}; + +static int opt4060_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct opt4060_chip *chip = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return opt4060_read_chan_raw(indio_dev, chan, val); + case IIO_CHAN_INFO_SCALE: + return opt4060_read_chan_scale(indio_dev, chan, val, val2); + case IIO_CHAN_INFO_PROCESSED: + return opt4060_read_illuminance(indio_dev, chan, val); + case IIO_CHAN_INFO_INT_TIME: + *val = 0; + *val2 = opt4060_int_time_reg[chip->int_time][0]; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int opt4060_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct opt4060_chip *chip = iio_priv(indio_dev); + int int_time; + + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + int_time = opt4060_als_time_to_index(val2); + if (int_time < 0) + return int_time; + chip->int_time = int_time; + return opt4060_set_int_time(chip); + default: + return -EINVAL; + } +} + +static int opt4060_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static u32 opt4060_calc_th_reg(u32 adc_val) +{ + u32 th_val, th_exp, bits; + /* + * The threshold registers take 4 bits of exponent and 12 bits of data + * ADC = TH_VAL << (8 + TH_EXP) + */ + bits = fls(adc_val); + + if (bits > 31) + th_exp = 11; /* Maximum exponent */ + else if (bits > 20) + th_exp = bits - 20; + else + th_exp = 0; + th_val = (adc_val >> (8 + th_exp)) & 0xfff; + + return (th_exp << 12) + th_val; +} + +static u32 opt4060_calc_val_from_th_reg(u32 th_reg) +{ + /* + * The threshold registers take 4 bits of exponent and 12 bits of data + * ADC = TH_VAL << (8 + TH_EXP) + */ + u32 th_val, th_exp; + + th_exp = (th_reg >> 12) & 0xf; + th_val = th_reg & 0xfff; + + return th_val << (8 + th_exp); +} + +static bool opt4060_event_active(struct opt4060_chip *chip) +{ + return chip->thresh_event_lo_active || chip->thresh_event_hi_active; +} + +static int opt4060_read_available(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + *length = ARRAY_SIZE(opt4060_int_time_available) * 2; + *vals = (const int *)opt4060_int_time_available; + *type = IIO_VAL_INT_PLUS_MICRO; + return IIO_AVAIL_LIST; + + default: + return -EINVAL; + } +} + +static int opt4060_event_set_state(struct iio_dev *indio_dev, bool state) +{ + struct opt4060_chip *chip = iio_priv(indio_dev); + int ret = 0; + + if (state) + ret = opt4060_set_continous_mode(chip, true); + else if (!iio_buffer_enabled(indio_dev) && chip->irq) + ret = opt4060_set_continous_mode(chip, false); + + if (ret) + dev_err(chip->dev, "Failed to set event state.\n"); + + return ret; +} + +static int opt4060_trigger_set_state(struct iio_trigger *trig, bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct opt4060_chip *chip = iio_priv(indio_dev); + int ret = 0; + + if (state) { + ret = opt4060_set_int_state(chip, OPT4060_INT_CTRL_ALL_CH); + if (ret) + return ret; + ret = opt4060_set_continous_mode(chip, true); + } else { + if (!opt4060_event_active(chip) && chip->irq) { + ret = opt4060_set_continous_mode(chip, false); + if (ret) + return ret; + } + ret = opt4060_set_int_state(chip, OPT4060_INT_CTRL_THRESHOLD); + } + return ret; +} + +static ssize_t opt4060_read_ev_period(struct opt4060_chip *chip, int *val, + int *val2) +{ + int ret, pers, fault_count, int_time; + u64 uval; + + int_time = opt4060_int_time_reg[chip->int_time][0]; + + ret = regmap_read(chip->regmap, OPT4060_CTRL, &fault_count); + if (ret < 0) + return ret; + + fault_count = fault_count & OPT4060_CTRL_FAULT_COUNT_MASK; + switch (fault_count) { + case OPT4060_CTRL_FAULT_COUNT_2: + pers = 2; + break; + case OPT4060_CTRL_FAULT_COUNT_4: + pers = 4; + break; + case OPT4060_CTRL_FAULT_COUNT_8: + pers = 8; + break; + + default: + pers = 1; + } + + uval = mul_u32_u32(int_time, pers); + *val = div_u64_rem(uval, MICRO, val2); + + return IIO_VAL_INT_PLUS_MICRO; +} + +static ssize_t opt4060_write_ev_period(struct opt4060_chip *chip, int val, + int val2) +{ + u64 uval, int_time; + unsigned int regval, fault_count_val; + + uval = mul_u32_u32(val, MICRO) + val2; + int_time = opt4060_int_time_reg[chip->int_time][0]; + + /* Check if the period is closest to 1, 2, 4 or 8 times integration time.*/ + if (uval <= int_time) + fault_count_val = OPT4060_CTRL_FAULT_COUNT_1; + else if (uval <= int_time * 2) + fault_count_val = OPT4060_CTRL_FAULT_COUNT_2; + else if (uval <= int_time * 4) + fault_count_val = OPT4060_CTRL_FAULT_COUNT_4; + else + fault_count_val = OPT4060_CTRL_FAULT_COUNT_8; + + regval = FIELD_PREP(OPT4060_CTRL_FAULT_COUNT_MASK, fault_count_val); + return regmap_update_bits(chip->regmap, OPT4060_CTRL, + OPT4060_CTRL_FAULT_COUNT_MASK, regval); +} + +static int opt4060_get_channel_sel(struct opt4060_chip *chip, int *ch_sel) +{ + int ret; + u32 regval; + + ret = regmap_read(chip->regmap, OPT4060_INT_CTRL, ®val); + if (ret) + dev_err(chip->dev, "Failed to get channel selection.\n"); + *ch_sel = FIELD_GET(OPT4060_INT_CTRL_THRESH_SEL, regval); + return ret; +} + +static int opt4060_set_channel_sel(struct opt4060_chip *chip, int ch_sel) +{ + int ret; + u32 regval; + + regval = FIELD_PREP(OPT4060_INT_CTRL_THRESH_SEL, ch_sel); + ret = regmap_update_bits(chip->regmap, OPT4060_INT_CTRL, + OPT4060_INT_CTRL_THRESH_SEL, regval); + if (ret) + dev_err(chip->dev, "Failed to set channel selection.\n"); + return ret; +} + +static int opt4060_get_thresholds(struct opt4060_chip *chip, u32 *th_lo, u32 *th_hi) +{ + int ret; + u32 regval; + + ret = regmap_read(chip->regmap, OPT4060_THRESHOLD_LOW, ®val); + if (ret) { + dev_err(chip->dev, "Failed to read THRESHOLD_LOW.\n"); + return ret; + } + *th_lo = opt4060_calc_val_from_th_reg(regval); + + ret = regmap_read(chip->regmap, OPT4060_THRESHOLD_HIGH, ®val); + if (ret) { + dev_err(chip->dev, "Failed to read THRESHOLD_LOW.\n"); + return ret; + } + *th_hi = opt4060_calc_val_from_th_reg(regval); + + return ret; +} + +static int opt4060_set_thresholds(struct opt4060_chip *chip, u32 th_lo, u32 th_hi) +{ + int ret; + + ret = regmap_write(chip->regmap, OPT4060_THRESHOLD_LOW, opt4060_calc_th_reg(th_lo)); + if (ret) { + dev_err(chip->dev, "Failed to write THRESHOLD_LOW.\n"); + return ret; + } + + ret = regmap_write(chip->regmap, OPT4060_THRESHOLD_HIGH, opt4060_calc_th_reg(th_hi)); + if (ret) + dev_err(chip->dev, "Failed to write THRESHOLD_HIGH.\n"); + + return ret; +} + +static int opt4060_read_event(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int *val, int *val2) +{ + int ret; + struct opt4060_chip *chip = iio_priv(indio_dev); + + if (chan->type != IIO_INTENSITY) + return -EINVAL; + if (type != IIO_EV_TYPE_THRESH) + return -EINVAL; + + switch (info) { + case IIO_EV_INFO_VALUE: + u32 th_lo, th_hi; + + ret = opt4060_get_thresholds(chip, &th_lo, &th_hi); + if (ret) + return ret; + if (dir == IIO_EV_DIR_FALLING) { + *val = th_lo; + ret = IIO_VAL_INT; + } else if (dir == IIO_EV_DIR_RISING) { + *val = th_hi; + ret = IIO_VAL_INT; + } + return ret; + case IIO_EV_INFO_PERIOD: + return opt4060_read_ev_period(chip, val, val2); + default: + return -EINVAL; + } +} + +static int opt4060_write_event(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int val, int val2) +{ + struct opt4060_chip *chip = iio_priv(indio_dev); + int ret; + + if (chan->type != IIO_INTENSITY) + return -EINVAL; + if (type != IIO_EV_TYPE_THRESH) + return -EINVAL; + + switch (info) { + case IIO_EV_INFO_VALUE: + u32 th_lo, th_hi; + + ret = opt4060_get_thresholds(chip, &th_lo, &th_hi); + if (ret) + return ret; + if (dir == IIO_EV_DIR_FALLING) + th_lo = val; + else if (dir == IIO_EV_DIR_RISING) + th_hi = val; + return opt4060_set_thresholds(chip, th_lo, th_hi); + case IIO_EV_INFO_PERIOD: + return opt4060_write_ev_period(chip, val, val2); + default: + return -EINVAL; + } +} + +static int opt4060_read_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir) +{ + int ch_sel, ch_idx = chan->scan_index; + struct opt4060_chip *chip = iio_priv(indio_dev); + int ret; + + if (chan->type != IIO_INTENSITY) + return -EINVAL; + if (type != IIO_EV_TYPE_THRESH) + return -EINVAL; + + ret = opt4060_get_channel_sel(chip, &ch_sel); + if (ret) + return ret; + + if (((dir == IIO_EV_DIR_FALLING) && chip->thresh_event_lo_active) || + ((dir == IIO_EV_DIR_RISING) && chip->thresh_event_hi_active)) + return ch_sel == ch_idx; + + return ret; +} + +static int opt4060_write_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, int state) +{ + int ch_sel, ch_idx = chan->scan_index; + struct opt4060_chip *chip = iio_priv(indio_dev); + int ret; + + if (chan->type != IIO_INTENSITY) + return -EINVAL; + if (type != IIO_EV_TYPE_THRESH) + return -EINVAL; + + ret = opt4060_get_channel_sel(chip, &ch_sel); + if (ret) + return ret; + + if (state) { + /* Only one channel can be active at the same time */ + if ((chip->thresh_event_lo_active || + chip->thresh_event_hi_active) && (ch_idx != ch_sel)) + return -EBUSY; + if (dir == IIO_EV_DIR_FALLING) + chip->thresh_event_lo_active = true; + else if (dir == IIO_EV_DIR_RISING) + chip->thresh_event_hi_active = true; + ret = opt4060_set_channel_sel(chip, ch_idx); + if (ret) + return ret; + } else { + if (ch_idx == ch_sel) { + if (dir == IIO_EV_DIR_FALLING) + chip->thresh_event_lo_active = false; + else if (dir == IIO_EV_DIR_RISING) + chip->thresh_event_hi_active = false; + } + } + + return opt4060_event_set_state(indio_dev, chip->thresh_event_hi_active | + chip->thresh_event_lo_active); +} + +static const struct iio_info opt4060_info = { + .read_raw = opt4060_read_raw, + .write_raw = opt4060_write_raw, + .write_raw_get_fmt = opt4060_write_raw_get_fmt, + .read_avail = opt4060_read_available, + .read_event_value = opt4060_read_event, + .write_event_value = opt4060_write_event, + .read_event_config = opt4060_read_event_config, + .write_event_config = opt4060_write_event_config, +}; + +static int opt4060_load_defaults(struct opt4060_chip *chip) +{ + u16 reg; + int ret; + + chip->int_time = OPT4060_DEFAULT_CONVERSION_TIME; + + /* Set initial MIN/MAX thresholds */ + ret = opt4060_set_thresholds(chip, 0, UINT_MAX); + if (ret) + return ret; + + /* + * Setting auto-range, latched window for thresholds, one-shot conversion + * and quick wake-up mode as default. + */ + reg = FIELD_PREP(OPT4060_CTRL_RANGE_MASK, + OPT4060_CTRL_LIGHT_SCALE_AUTO); + reg |= FIELD_PREP(OPT4060_CTRL_CONV_TIME_MASK, chip->int_time); + reg |= FIELD_PREP(OPT4060_CTRL_OPER_MODE_MASK, + OPT4060_CTRL_OPER_MODE_ONE_SHOT); + reg |= OPT4060_CTRL_QWAKE_MASK | OPT4060_CTRL_LATCH_MASK; + + ret = regmap_write(chip->regmap, OPT4060_CTRL, reg); + if (ret) + dev_err(chip->dev, "Failed to set configuration\n"); + + return ret; +} + +static bool opt4060_volatile_reg(struct device *dev, unsigned int reg) +{ + return reg <= OPT4060_CLEAR_LSB || reg == OPT4060_RES_CTRL; +} + +static bool opt4060_writable_reg(struct device *dev, unsigned int reg) +{ + return reg >= OPT4060_THRESHOLD_LOW || reg >= OPT4060_INT_CTRL; +} + +static bool opt4060_readonly_reg(struct device *dev, unsigned int reg) +{ + return reg == OPT4060_DEVICE_ID; +} + +static bool opt4060_readable_reg(struct device *dev, unsigned int reg) +{ + /* Volatile, writable and read-only registers are readable. */ + return opt4060_volatile_reg(dev, reg) || opt4060_writable_reg(dev, reg) || + opt4060_readonly_reg(dev, reg); +} + +static const struct regmap_config opt4060_regmap_config = { + .name = "opt4060", + .reg_bits = 8, + .val_bits = 16, + .cache_type = REGCACHE_RBTREE, + .max_register = OPT4060_DEVICE_ID, + .readable_reg = opt4060_readable_reg, + .writeable_reg = opt4060_writable_reg, + .volatile_reg = opt4060_volatile_reg, + .val_format_endian = REGMAP_ENDIAN_BIG, +}; + +static const struct iio_trigger_ops opt4060_trigger_ops = { + .validate_device = iio_trigger_validate_own_device, + .set_trigger_state = opt4060_trigger_set_state, +}; + +static irqreturn_t opt4060_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *idev = pf->indio_dev; + struct opt4060_chip *chip = iio_priv(idev); + struct opt4060_buffer raw; + int ret, chan = 0, i = 0; + + memset(&raw, 0, sizeof(raw)); + + iio_for_each_active_channel(idev, chan) { + if (chan == OPT4060_ILLUM) + ret = opt4060_calc_illuminance(chip, &raw.chan[i++]); + else + ret = opt4060_read_raw_value(chip, + idev->channels[chan].address, + &raw.chan[i++]); + if (ret) { + dev_err(chip->dev, "Reading channel data failed\n"); + goto err_read; + } + } + + iio_push_to_buffers_with_timestamp(idev, &raw, pf->timestamp); +err_read: + iio_trigger_notify_done(idev->trig); + return IRQ_HANDLED; +} + +static irqreturn_t opt4060_irq_thread(int irq, void *private) +{ + struct iio_dev *idev = private; + struct opt4060_chip *chip = iio_priv(idev); + int ret, dummy; + unsigned int int_res; + + ret = regmap_read(chip->regmap, OPT4060_RES_CTRL, &int_res); + if (ret < 0) { + dev_err(chip->dev, "Failed to read interrupt reasons.\n"); + return IRQ_NONE; + } + + /* Read OPT4060_CTRL to clear interrupt */ + ret = regmap_read(chip->regmap, OPT4060_CTRL, &dummy); + if (ret < 0) { + dev_err(chip->dev, "Failed to clear interrupt\n"); + return IRQ_NONE; + } + + /* Handle events */ + if (int_res & (OPT4060_RES_CTRL_FLAG_H | OPT4060_RES_CTRL_FLAG_L)) { + u64 code; + int chan = 0; + + ret = opt4060_get_channel_sel(chip, &chan); + if (ret) { + dev_err(chip->dev, "Failed to read threshold channel.\n"); + return IRQ_NONE; + } + + /* Check if the interrupt is from the lower threshold */ + if (int_res & OPT4060_RES_CTRL_FLAG_L) { + code = IIO_UNMOD_EVENT_CODE(IIO_INTENSITY, + chan, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_FALLING); + iio_push_event(idev, code, iio_get_time_ns(idev)); + } + /* Check if the interrupt is from the upper threshold */ + if (int_res & OPT4060_RES_CTRL_FLAG_H) { + code = IIO_UNMOD_EVENT_CODE(IIO_INTENSITY, + chan, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_RISING); + iio_push_event(idev, code, iio_get_time_ns(idev)); + } + } + + /* Handle conversion ready */ + if (int_res & OPT4060_RES_CTRL_CONV_READY) { + /* Signal completion for potentially waiting reads */ + complete(&chip->completion); + + /* Handle data ready triggers */ + if (iio_buffer_enabled(idev)) + iio_trigger_poll_nested(chip->trig); + } + return IRQ_HANDLED; +} + +static int opt4060_setup_triggers(struct opt4060_chip *chip, struct iio_dev *idev) +{ + struct iio_trigger *data_trigger; + char *name; + int ret; + + ret = devm_iio_triggered_buffer_setup(chip->dev, idev, + &iio_pollfunc_store_time, + opt4060_trigger_handler, NULL); + if (ret) + return dev_err_probe(chip->dev, ret, + "iio_triggered_buffer_setup_ext FAIL\n"); + + data_trigger = devm_iio_trigger_alloc(chip->dev, "%s-data-ready-dev%d", + idev->name, iio_device_id(idev)); + if (!data_trigger) + return -ENOMEM; + + /* The data trigger allows for sample capture on each new conversion ready interrupt. */ + chip->trig = data_trigger; + data_trigger->ops = &opt4060_trigger_ops; + iio_trigger_set_drvdata(data_trigger, idev); + ret = devm_iio_trigger_register(chip->dev, data_trigger); + if (ret) + return dev_err_probe(chip->dev, ret, + "Data ready trigger registration failed\n"); + + name = devm_kasprintf(chip->dev, GFP_KERNEL, "%s-opt4060", + dev_name(chip->dev)); + if (!name) + return dev_err_probe(chip->dev, -ENOMEM, "Failed to alloc chip name\n"); + + ret = devm_request_threaded_irq(chip->dev, chip->irq, NULL, opt4060_irq_thread, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | + IRQF_ONESHOT, name, idev); + if (ret) + return dev_err_probe(chip->dev, ret, "Could not request IRQ\n"); + + ret = regmap_write_bits(chip->regmap, OPT4060_INT_CTRL, + OPT4060_INT_CTRL_OUTPUT, + OPT4060_INT_CTRL_OUTPUT); + if (ret) + return dev_err_probe(chip->dev, ret, + "Failed to set interrupt as output\n"); + + return 0; +} + +static int opt4060_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct opt4060_chip *chip; + struct iio_dev *indio_dev; + int ret; + uint dev_id; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*chip)); + if (!indio_dev) + return -ENOMEM; + + chip = iio_priv(indio_dev); + + ret = devm_regulator_get_enable(dev, "vdd"); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable vdd supply\n"); + + chip->regmap = devm_regmap_init_i2c(client, &opt4060_regmap_config); + if (IS_ERR(chip->regmap)) + return dev_err_probe(dev, PTR_ERR(chip->regmap), + "regmap initialization failed\n"); + + chip->dev = dev; + chip->irq = client->irq; + init_completion(&chip->completion); + + indio_dev->info = &opt4060_info; + + ret = regmap_reinit_cache(chip->regmap, &opt4060_regmap_config); + if (ret) + return dev_err_probe(dev, ret, + "failed to reinit regmap cache\n"); + + ret = regmap_read(chip->regmap, OPT4060_DEVICE_ID, &dev_id); + if (ret < 0) + return dev_err_probe(dev, ret, + "Failed to read the device ID register\n"); + + dev_id = FIELD_GET(OPT4060_DEVICE_ID_MASK, dev_id); + if (dev_id != OPT4060_DEVICE_ID_VAL) + dev_info(dev, "Device ID: %#04x unknown\n", dev_id); + + if (chip->irq) { + indio_dev->channels = opt4060_channels; + indio_dev->num_channels = ARRAY_SIZE(opt4060_channels); + } else { + indio_dev->channels = opt4060_channels_no_events; + indio_dev->num_channels = ARRAY_SIZE(opt4060_channels_no_events); + } + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->name = "opt4060"; + + ret = opt4060_load_defaults(chip); + if (ret < 0) + return dev_err_probe(dev, ret, + "Failed to set sensor defaults\n"); + + ret = devm_add_action_or_reset(dev, opt4060_chip_off_action, chip); + if (ret < 0) + return dev_err_probe(dev, ret, + "Failed to setup power off action\n"); + + if (chip->irq) { + ret = opt4060_setup_triggers(chip, indio_dev); + if (ret) + return ret; + } + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct i2c_device_id opt4060_id[] = { + { "opt4060", }, + { } +}; +MODULE_DEVICE_TABLE(i2c, opt4060_id); + +static const struct of_device_id opt4060_of_match[] = { + { .compatible = "ti,opt4060" }, + { } +}; +MODULE_DEVICE_TABLE(of, opt4060_of_match); + +static struct i2c_driver opt4060_driver = { + .driver = { + .name = "opt4060", + .of_match_table = opt4060_of_match, + }, + .probe = opt4060_probe, + .id_table = opt4060_id, +}; +module_i2c_driver(opt4060_driver); + +MODULE_DESCRIPTION("Texas Instruments OPT4060 RGBW color sensor driver"); +MODULE_LICENSE("GPL"); -- 2.39.5
