Re: [PATCH v4 0/2] iio: light: veml6070: add integration time

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 31 Oct 2024 00:09:56 +0100
Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx> wrote:

> This series adds a missing feature in the veml6070 driver to select the
> integration time, which also depends on an external restistor that has
> been added to the corresponding bindings.
> 
> The datasheet provides a Refresh time vs Rset graph (figure 7), which
> does not clearly specify the minimum and maximum values for Rset. The
> manufacuter has confirmed that no values under 75 kohms should be used
> to keep linearity, and the graph does not go beyond 1200 kohms, which is
> also the biggest Rset used in the application note. The default value of
> 270 kohms is the one currently used in the driver to calculate the UVI.
> 
> Signed-off-by: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
Applied and initially pushed out as testing for 0-day to take a look.

Thanks,

Jonathan

> ---
> Changes in v4:
> - Add vendor prefix to rset-ohms property (bindings and driver).
> - Drop default values for out-of-range rset and fail the probe instead.
> - Link to v3: https://lore.kernel.org/r/20241028-veml6070-integration-time-v3-0-dd7ace62f480@xxxxxxxxx
> 
> Changes in v3:
> - veml6075.yaml: simplify property handling (describe it completely at
>   the top and add block for the devices that do not support it).
> - veml6070.c: use int instead of u32 for the integration times.
> - veml6070.c: refactor default rset value assignment.
> - veml6070.c: drop comment about default Rset and IT.
> - veml6070.c: use units from units.h
> - Link to v2: https://lore.kernel.org/r/20241024-veml6070-integration-time-v2-0-d53272ec0feb@xxxxxxxxx
> 
> Changes in v2:
> - Rebase onto iio/testing and drop applied patches.
> - veml6075.yaml: use documented -ohms, top-level definition and
>   per-device restriction.
> - veml6075.yaml: add default value.
> - veml6075.yaml: fix typo in commit message.
> - veml6070.c: adjust rset property name and convert from ohms to kohms
>   to avoid overflows and work with the same units as in the datasheet.
> - veml6070.c: change default to 270 kohms (already used as default
>   value to calculate UVI).
> - veml6070.c: calculate UVI according to the current integration time.
> - veml6070.c: re-calculate measurement time (i.e. msleep()) with the
>   current integration time.
> - Link to v1: https://lore.kernel.org/r/20241017-veml6070-integration-time-v1-0-3507d17d562a@xxxxxxxxx
> 
> ---
> Javier Carrasco (2):
>       dt-bindings: iio: light: veml6075: document vishay,rset-ohms
>       iio: light: veml6070: add support for integration time
> 
>  .../bindings/iio/light/vishay,veml6075.yaml        |  18 +++
>  drivers/iio/light/veml6070.c                       | 131 +++++++++++++++++++--
>  2 files changed, 141 insertions(+), 8 deletions(-)
> ---
> base-commit: e2687d0723257db5025a4cf8cefbd80bed1e2681
> change-id: 20241014-veml6070-integration-time-78daf4eaad2f
> 
> Best regards,





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux