Linux IIO Development

• Thread Index

• Re: [PATCH v6 1/7] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v2 04/10] dt-bindings: iio: adc: adi,ad7606: improve descriptions
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 03/10] dt-bindings: iio: adc: adi,ad7606: normalize textwidth
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 00/15] iio: chemical: bme680: Driver cleanup
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 00/15] iio: chemical: bme680: Driver cleanup
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: light: ROHM BH1745 colour sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 0/2] iio: frequency: add iio support for Amlogic clock measure
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: frequency: add iio support for Amlogic clock measure
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH v4 3/3] docs: iio: add documentation for adxl380 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v4 2/3] iio: accel: add ADXL380 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: iio: accel: add ADXL380
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: frequency: add iio support for Amlogic clock measure
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 0/5] spi: add support for pre-cooking messages
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v5 0/8] Enable eQEP DT support for Sitara K3 platforms
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH v9 0/3] iio: pressure: bmp280: Minor cleanup and triggered
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 00/15] iio: chemical: bme680: Driver cleanup
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v6 5/6] iio: adc: ad7192: Add clock provider
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dev_printk: add new dev_err_probe() helpers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 6/7] iio: adc: Add support for AD4000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/7] spi: spi-gpio: Add support for MOSI idle state configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/7] spi: bitbang: Implement support for MOSI idle state configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/7] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: xilinx-ams: Add labels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ad7944: use devm_spi_optimize_message()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: (subset) [PATCH v12 0/7] iio: new DMABUF based API v12
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 0/3] iio: pressure: bmp280: Minor cleanup and triggered
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: frequency: add amlogic clock measure support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 6/6] MAINTAINERS: Update AD7192 driver maintainer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 4/6] dt-bindings: iio: adc: ad7192: Add clock provider
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 5/6] iio: adc: ad7192: Add clock provider
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/6] iio: adc: ad7192: Update clock config
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/6] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: frequency: add amlogic clock measure support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: frequency: add amlogic clock measure support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: frequency: add amlogic clock measure support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: ad4695: Add driver for AD4695 and similar ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• [PATCH v6 7/7] docs: iio: Add documentation for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v6 6/7] iio: adc: Add support for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v6 5/7] dt-bindings: iio: adc: Add AD4000
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v6 4/7] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v6 3/7] spi: spi-gpio: Add support for MOSI idle state configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v6 2/7] spi: bitbang: Implement support for MOSI idle state configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v6 1/7] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v6 0/7] Add support for AD4000 series of ADCs
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• Re: [PATCH v2 6/8] iio: adc: stm32-dfsdm: adopt generic channels bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/8] iio: add child nodes support in iio backend framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/8] iio: add read raw service to iio backend framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 3/3] iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 6/7] iio: adc: Add support for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: light: stk33xx: add compatible for stk3013
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 6/7] iio: adc: Add support for AD4000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: apds9306: Fix error handing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: light: ROHM BH1745 colour sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add AVAGO APDS9306
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v3 3/3] docs: iio: add documentation for adxl380 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: accel: add ADXL380 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 4/5] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 0/5] iio: adc: ad4030: new driver for AD4030 and similar ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 2/5] iio: adc: ad4030: add driver for ad4030-24
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC 2/5] iio: adc: ad4030: add driver for ad4030-24
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/10] iio: adc: ad7606: Improvements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 10/10] iio: adc: ad7606: switch mutexes to scoped_guard
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 05/10] dt-bindings: iio: adc: adi,ad7606: add supply properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/10] dt-bindings: iio: adc: adi,ad7606: improve descriptions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/10] dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: light: ROHM BH1745 colour sensor
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• Re: [PATCH v2 4/8] dt-bindings: iio: dfsdm: move to backend framework
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: light: ROHM BH1745 colour sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] hwmon: iio: Add labels from IIO channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ltc2309: Fix endian type passed to be16_to_cpu()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad7606: remove frstdata check for serial mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: stm32: dfsdm: fix dtbs warnings on dfsdm audio port
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] add AD8460 DAC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/5] spi: add support for pre-cooking messages
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v9 3/3] iio: pressure: bmp280: Add triggered buffer support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v9 2/3] iio: pressure: bmp280: Add SCALE, RAW values in channels and refactorize them
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v9 1/3] iio: pressure: bmp280: Generalize read_*() functions
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v9 0/3] iio: pressure: bmp280: Minor cleanup and triggered
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH RFC 1/5] dt-bindings: iio: adc: add ADI ad4030 and ad4630
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 00/10] iio: adc: ad7606: Improvements
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 00/10] iio: adc: ad7606: Improvements
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [GIT PULL] Immutable branch between MFD and Counter due for the v5.11 merge window
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v2 0/5] spi: add support for pre-cooking messages
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 07/10] dt-bindings: iio: adc: adi,ad7606: add conditions
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 10/10] iio: adc: ad7606: switch mutexes to scoped_guard
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 09/10] iio: adc: ad7606: fix standby gpio state to match the documentation
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 08/10] iio: adc: ad7606: fix oversampling gpio array
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 07/10] dt-bindings: iio: adc: adi,ad7606: add conditions
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 05/10] dt-bindings: iio: adc: adi,ad7606: add supply properties
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 06/10] dt-bindings: iio: adc: adi,ad7606: fix example
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 04/10] dt-bindings: iio: adc: adi,ad7606: improve descriptions
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 03/10] dt-bindings: iio: adc: adi,ad7606: normalize textwidth
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 00/10] iio: adc: ad7606: Improvements
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 02/10] dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 01/10] dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [PATCH v5 7/7] docs: iio: Add documentation for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [GIT PULL] Immutable branch between MFD and Counter due for the v5.11 merge window
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/5] spi: add support for pre-cooking messages
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/5] spi: add support for pre-cooking messages
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] spi: add support for pre-cooking messages
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH RFC 2/5] iio: adc: ad4030: add driver for ad4030-24
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v5 6/7] iio: adc: Add support for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 1/9] dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: stm32: dfsdm: fix dtbs warnings on dfsdm audio port
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] hwmon: iio: Add labels from IIO channels
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• Re: [PATCH v5 1/7] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v5 6/7] iio: adc: Add support for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v2 5/8] dt-bindings: iio: add sigma delta modulator backend
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: accel: add ADXL380
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH RFC 5/5] iio: adc: ad4030: add support for ad4632-16 and ad4632-24
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH RFC 4/5] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH RFC 3/5] iio: adc: ad4030: add averaging support
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH RFC 2/5] iio: adc: ad4030: add driver for ad4030-24
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH RFC 0/5] iio: adc: ad4030: new driver for AD4030 and similar ADCs
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH RFC 1/5] dt-bindings: iio: adc: add ADI ad4030 and ad4630
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH v3 3/3] docs: iio: add documentation for adxl380 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v3 2/3] iio: accel: add ADXL380 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: accel: add ADXL380
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH v5 1/8] dt-bindings: counter: Add new ti,am62-eqep compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 1/8] dt-bindings: counter: Add new ti,am62-eqep compatible
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v5 6/7] iio: adc: Add support for AD4000
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 1/8] iio: add read raw service to iio backend framework
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v2 5/8] dt-bindings: iio: add sigma delta modulator backend
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v2 8/8] iio: adc: stm32-dfsdm: add scaling support to dfsdm
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: light: stk33xx: add compatible for stk3013
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v5 5/7] dt-bindings: iio: adc: Add AD4000
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v5 7/7] docs: iio: Add documentation for AD4000
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 1/7] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/5] mfd: stm32-timers: Make register definition more flexible
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v5 4/7] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 3/7] spi: spi-gpio: Add support for MOSI idle state configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 2/7] spi: bitbang: Implement support for MOSI idle state configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: ad4695: Add driver for AD4695 and similar ADCs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v5 1/7] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 1/4] dev_printk: add new dev_err_probe() helpers
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: ad4695: Add driver for AD4695 and similar ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] MAINTAINERS: Add AVAGO APDS9306
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v8 1/3] iio: pressure: bmp280: Generalize read_*() functions
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v5 6/7] iio: adc: Add support for AD4000
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v8 1/3] iio: pressure: bmp280: Generalize read_*() functions
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v5 5/7] dt-bindings: iio: adc: Add AD4000
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v5 4/7] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v5 6/7] iio: adc: Add support for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v5 6/7] iio: adc: Add support for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v6 5/6] iio: adc: ad7192: Add clock provider
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: light: apds9306: Fix error handing
  • From: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: adc: ad4695: Add driver for AD4695 and similar ADCs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v5 5/7] dt-bindings: iio: adc: Add AD4000
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v5 6/7] iio: adc: Add support for AD4000
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v8 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH v5 4/7] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v5 1/7] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 8/8] iio: adc: stm32-dfsdm: add scaling support to dfsdm
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 7/8] iio: add sd modulator generic iio backend
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 3/8] iio: add child nodes support in iio backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 1/8] iio: add read raw service to iio backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v8 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: drop stale Anson Huang from maintainers
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v5 4/7] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v5 6/7] iio: adc: Add support for AD4000
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: light: ROHM BH1745 colour sensor
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: drop stale Anson Huang from maintainers
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v6 2/2] iio: light: ROHM BH1745 colour sensor
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: iio: light: ROHM BH1745
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• [PATCH v5 7/7] docs: iio: Add documentation for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 6/7] iio: adc: Add support for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 5/7] dt-bindings: iio: adc: Add AD4000
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 4/7] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 3/7] spi: spi-gpio: Add support for MOSI idle state configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 2/7] spi: bitbang: Implement support for MOSI idle state configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 1/7] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v5 0/7] Add support for AD4000 series of ADCs
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH] iio: light: apds9306: Fix error handing
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• Re: [PATCH v8 1/3] iio: pressure: bmp280: Generalize read_*() functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: light: ROHM BH1745 colour sensor
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• Re: (subset) [PATCH v2 0/2] spi: add devm_spi_optimize_message() helper
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v8 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 1/2] iio: light: stk3310: add support for stk3013
  • From: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio: frequency: add amlogic clock measure support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: light: stk33xx: add compatible for stk3013
  • From: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] spi: add EXPORT_SYMBOL_GPL(devm_spi_optimize_message)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v8 3/3] iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v8 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v8 1/3] dt-bindings: vendor-prefixes: add tyhx
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v8 0/3] iio: proximity: Add TYHX HX9023S sensor driver
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• RE: [PATCH v4 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: "Paller, Kim Seer" <KimSeer.Paller@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• RE: [PATCH v4 3/5] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: "Paller, Kim Seer" <KimSeer.Paller@xxxxxxxxxx>
• Re: [PATCH v2 5/8] dt-bindings: iio: add sigma delta modulator backend
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ltc2309: Fix endian type passed to be16_to_cpu()
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v2 7/8] iio: add sd modulator generic iio backend
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 8/8] iio: adc: stm32-dfsdm: add scaling support to dfsdm
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 6/8] iio: adc: stm32-dfsdm: adopt generic channels bindings
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 4/8] dt-bindings: iio: dfsdm: move to backend framework
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 5/8] dt-bindings: iio: add sigma delta modulator backend
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 3/8] iio: add child nodes support in iio backend framework
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 0/8] iio: adc: dfsdm: add scaling support
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 2/8] iio: add enable and disable services to iio backend framework
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 1/8] iio: add read raw service to iio backend framework
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio: frequency: add amlogic clock measure support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 0/2] iio: frequency: add iio support for Amlogic clock measure
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH 0/2] iio: frequency: add iio support for Amlogic clock measure
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 7/8] iio: add sd modulator generic iio backend
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: adc: ad_sigma_delta: fix disable_one callback
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH 0/2] iio: frequency: add iio support for Amlogic clock measure
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ad_sigma_delta: fix disable_one callback
  • From: "Ceclan, Dumitru" <mitrutzceclan@xxxxxxxxx>
• Re: [PATCH 8/8] iio: adc: stm32-dfsdm: add scaling support to dfsdm
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: vendor-prefixes: add tyhx
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH 0/2] iio: frequency: add iio support for Amlogic clock measure
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 5/8] dt-bindings: iio: add sigma delta modulator backend
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: vendor-prefixes: add tyhx
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH v7 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH v7 3/3] iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH v7 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH 2/2] iio: frequency: add amlogic clock measure support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: vendor-prefixes: add tyhx
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH] iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()
  • From: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
• Re: [PATCH v7 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: vendor-prefixes: add tyhx
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v7 3/3] iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v7 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 5/6] iio: adc: ad7192: Add clock provider
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: frequency: add clock measure support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 3/6] iio: adc: ad7192: Update clock config
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• Re: [PATCH v7 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v7 3/3] iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v7 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v7 1/3] dt-bindings: vendor-prefixes: add tyhx
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v7 0/3] iio: proximity: Add TYHX HX9023S sensor driver
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH v6 3/3] iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: frequency: add amlogic clock measure support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: frequency: add amlogic clock measure support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: light: ROHM BH1745 colour sensor
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v3 2/3] iio: adc: ad4695: Add driver for AD4695 and similar ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 3/3] Documentation: iio: Document ad4695 driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: adc: add AD4695 and similar ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 0/3] iio: adc: ad4695: new driver for AD4695 and similar ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v5 2/2] iio: light: ROHM BH1745 colour sensor
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: light: ROHM BH1745
  • From: Mudit Sharma <muditsharma.info@xxxxxxxxx>
• [PATCH v3 2/2] iio: adc: ad7944: use devm_spi_optimize_message()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 0/2] spi: add devm_spi_optimize_message() helper
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 1/2] spi: add EXPORT_SYMBOL_GPL(devm_spi_optimize_message)
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] spi: add EXPORT_SYMBOL_GPL(devm_spi_optimize_message)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: ad7944: use devm_spi_optimize_message()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 0/2] spi: add devm_spi_optimize_message() helper
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 1/2] spi: add EXPORT_SYMBOL_GPL(devm_spi_optimize_message)
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] hwmon: iio: Add labels from IIO channels
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] spi: add devm_spi_optimize_message() helper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] spi: add devm_spi_optimize_message() helper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] spi: add devm_spi_optimize_message() helper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] hwmon: iio: Add labels from IIO channels
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• Re: [PATCH 00/10] iio: use devm_regulator_get_enable_read_voltage round 2
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: ltc2309: Fix endian type passed to be16_to_cpu()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] hwmon: iio: Add labels from IIO channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] hwmon: iio: Add labels from IIO channels
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 6/8] power: supply: axp20x_usb_power: Add support for AXP717
  • From: Philippe Simons <simons.philippe@xxxxxxxxx>
• Re: [PATCH 7/8] power: supply: axp20x_battery: add support for AXP717
  • From: Philippe Simons <simons.philippe@xxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: adc: add AD4695 and similar ADCs
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2 2/2] hwmon: iio: Add labels from IIO channels
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• [PATCH v2 1/2] iio: Add iio_read_channel_label to inkern API
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• [PATCH v2 0/2] hwmon: iio: Add labels
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• Re: [PATCH 7/8] iio: add sd modulator generic iio backend
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 2/2] iio: frequency: add amlogic clock measure support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH 0/2] iio: frequency: add iio support for Amlogic clock measure
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: frequency: add clock measure support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 3/5] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 7/8] iio: add sd modulator generic iio backend
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v6 2/6] dt-bindings: iio: adc: ad7192: Update clock config
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v6 4/6] dt-bindings: iio: adc: ad7192: Add clock provider
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 3/5] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [RFC PATCH] i2c: imx: avoid rescheduling when waiting for bus not busy
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• RE: [PATCH v4 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: "Paller, Kim Seer" <KimSeer.Paller@xxxxxxxxxx>
• Re: [PATCH 7/8] iio: add sd modulator generic iio backend
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• RE: [PATCH v4 3/5] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: "Paller, Kim Seer" <KimSeer.Paller@xxxxxxxxxx>
• Re: [PATCH 8/9] iio: adc: ad7606: fix oversampling gpio array
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: adc: add AD4695 and similar ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: adc: add AD4695 and similar ADCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad7606: remove frstdata check for serial mode
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [GIT PULL] Counter fixes for 6.10
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v6 6/6] MAINTAINERS: Update AD7192 driver maintainer
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v6 5/6] iio: adc: ad7192: Add clock provider
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v6 4/6] dt-bindings: iio: adc: ad7192: Add clock provider
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v6 3/6] iio: adc: ad7192: Update clock config
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v6 2/6] dt-bindings: iio: adc: ad7192: Update clock config
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v6 1/6] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v6 0/6] iio: adc: ad7192: Improvements
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH 7/8] iio: add sd modulator generic iio backend
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH 7/8] power: supply: axp20x_battery: add support for AXP717
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 10/10] iio: dac: ad3552r: use devm_regulator_get_enable_read_voltage()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 06/10] iio: adc: max1363: use devm_regulator_get_enable_read_voltage()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 05/10] iio: adc: ltc2309: use devm_regulator_get_enable_read_voltage()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/8] iio: add enable and disable services to iio backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 2/2] iio: frequency: adf4350: add clk provider
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 02/10] iio: adc: hx711: use devm_regulator_get_enable_read_voltage()
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH 04/10] iio: adc: hx711: use dev_err_probe()
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH 03/10] iio: adc: hx711: remove hx711_remove()
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• RE: [PATCH 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: "Tinaco, Mariel" <Mariel.Tinaco@xxxxxxxxxx>
• RE: [PATCH 0/2] add AD8460 DAC driver
  • From: "Tinaco, Mariel" <Mariel.Tinaco@xxxxxxxxxx>
• Re: [PATCH v8 1/3] iio: pressure: bmp280: Generalize read_*() functions
  • From: Adam Rizkalla <ajarizzo@xxxxxxxxx>
• RE: [PATCH 1/2] dt-bindings: iio: dac: add docs for ad8460
  • From: "Tinaco, Mariel" <Mariel.Tinaco@xxxxxxxxxx>
• RE: [PATCH 2/2] iio: dac: support the ad8460 Waveform DAC
  • From: "Tinaco, Mariel" <Mariel.Tinaco@xxxxxxxxxx>
• Re: [PATCH 01/10] iio: adc: aspeed_adc: use devm_regulator_get_enable_read_voltage()
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• [GIT PULL] Counter fixes for 6.10
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH 0/3] spi: add devm_spi_optimize_message() helper
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v8 3/3] iio: pressure: bmp280: Add triggered buffer support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v8 1/3] iio: pressure: bmp280: Generalize read_*() functions
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: ROHM BH1745 colour sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: (subset) [PATCH 0/3] spi: add devm_spi_optimize_message() helper
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: adc: ad4695: Add driver for AD4695 and similar ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: adc: add AD4695 and similar ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/8] iio: adc: axp20x_adc: add support for AXP717 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 3/3] iio: pressure: bmp280: Add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 1/3] iio: pressure: bmp280: Generalize read_*() functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 8/9] iio: imu: adis16475: make use of the new lock helpers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/9] iio: imu: adis_buffer: split trigger handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/9] iio: imu: adis_buffer: split trigger handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/6] iio: adc: ad7192: Improvements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/6] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad7606: remove frstdata check for serial mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 9/9] iio: adc: ad7606: fix standby gpio state to match the documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 8/9] iio: adc: ad7606: fix oversampling gpio array
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/9] iio: adc: ad7606: switch mutexes to scoped_guard
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/9] dt-bindings: iio: adc: adi,ad7606: fix example
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/9] dt-bindings: iio: adc: adi,ad7606: add conditions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/9] dt-bindings: iio: adc: adi,ad7606: add supply properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/9] dt-bindings: iio: adc: adi,ad7606: improve descriptions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 8/8] iio: adc: stm32-dfsdm: add scaling support to dfsdm
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/8] iio: add sd modulator generic iio backend
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/8] dt-bindings: iio: dfsdm: move to backend framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/8] iio: adc: stm32-dfsdm: adopt generic channels bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] dt-bindings: iio: st-sensors: add LIS2DS12 accelerometer
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 3/8] iio: add child nodes support in iio backend framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/8] iio: add enable and disable services to iio backend framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] drivers: iio: adc: add support for ad777x family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/3] ad777x driver addressing patch comments
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adc: add a7779 doc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: Add iio_read_channel_label to inkern API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: xilinx-ams: Add labels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/3] iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: accel: add ADXL380 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] docs: iio: add documentation for adxl380 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: iio: accel: add ADXL380
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad_sigma_delta: fix disable_one callback
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] spi: add devm_spi_optimize_message() helper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/10] iio: use devm_regulator_get_enable_read_voltage round 2
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] dt-bindings: iio: st-sensors: add LIS2DS12 accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/8] power: supply: axp20x_battery: add support for AXP717
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH 4/8] mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH 6/8] power: supply: axp20x_usb_power: Add support for AXP717
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH 5/8] iio: adc: axp20x_adc: add support for AXP717 ADC
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: iio: adc: Add AXP717 compatible
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH 3/8] power: supply: axp20x_battery: add support for AXP717
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH 2/8] power: supply: axp20x_usb_power: Add support for AXP717
  • From: Chen-Yu Tsai <wens@xxxxxxxxxx>
• Re: [PATCH v6 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH 7/8] power: supply: axp20x_battery: add support for AXP717
  • From: "Ryan Walklin" <ryan@xxxxxxxxxxxxx>
• Re: [PATCH 6/8] power: supply: axp20x_usb_power: Add support for AXP717
  • From: "Ryan Walklin" <ryan@xxxxxxxxxxxxx>
• Re: [PATCH 7/8] power: supply: axp20x_battery: add support for AXP717
  • From: Philippe Simons <simons.philippe@xxxxxxxxx>
• Re: [PATCH 6/8] power: supply: axp20x_usb_power: Add support for AXP717
  • From: Philippe Simons <simons.philippe@xxxxxxxxx>
• Re: [PATCH v6 2/2] iio: frequency: adf4350: add clk provider
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: ti-ads1119: Add driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: adi-axi-dac: improve probe() error messaging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 00/41] iio: simplify with regmap_set_bits(), regmap_clear_bits()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v8 3/3] iio: pressure: bmp280: Add triggered buffer support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v5 1/2] iio: accel: st_accel: add support for LIS2DS12
  • From: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
• [PATCH v5 2/2] dt-bindings: iio: st-sensors: add LIS2DS12 accelerometer
  • From: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
• Re: [PATCH v6 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH v8 3/3] iio: pressure: bmp280: Add triggered buffer support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: (subset) [PATCH V2 0/4] Add GPADC for Allwinner H616
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: (subset) [PATCH V2 0/4] Add GPADC for Allwinner H616
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: (subset) [PATCH V2 0/4] Add GPADC for Allwinner H616
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v8 1/3] iio: pressure: bmp280: Generalize read_*() functions
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v6 3/3] iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH v6 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 02/41] iio: accel: kxsd9: Make use of regmap_clear_bits()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 3/3] iio: pressure: bmp280: Add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 1/3] iio: pressure: bmp280: Generalize read_*() functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [RFC PATCH] i2c: imx: avoid rescheduling when waiting for bus not busy
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2] counter: ti-eqep: enable clock at probe
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• [PATCH v2] counter: ti-eqep: enable clock at probe
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 10/10] iio: dac: ad3552r: use devm_regulator_get_enable_read_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 09/10] iio: adc: ti-ads8688: drop ads8688_remove()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 08/10] iio: adc: ti-ads8688: use devm_regulator_get_enable_read_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 07/10] iio: adc: ti-adc108s102: use devm_regulator_get_enable_read_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 06/10] iio: adc: max1363: use devm_regulator_get_enable_read_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 05/10] iio: adc: ltc2309: use devm_regulator_get_enable_read_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 04/10] iio: adc: hx711: use dev_err_probe()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 03/10] iio: adc: hx711: remove hx711_remove()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 02/10] iio: adc: hx711: use devm_regulator_get_enable_read_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 00/10] iio: use devm_regulator_get_enable_read_voltage round 2
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 01/10] iio: adc: aspeed_adc: use devm_regulator_get_enable_read_voltage()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 3/3] iio: adc: ad7944: use devm_spi_optimize_message()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 2/3] spi: add devm_spi_optimize_message() helper
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 1/3] Documentation: devres: add missing SPI helpers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 0/3] spi: add devm_spi_optimize_message() helper
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [RFC PATCH] i2c: imx: avoid rescheduling when waiting for bus not busy
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: iio: Add labels from IIO channels
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: iio: Add labels from IIO channels
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• Re: [RFC PATCH] i2c: imx: avoid rescheduling when waiting for bus not busy
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• Re: [PATCH 2/2] hwmon: iio: Add labels from IIO channels
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• Re: [PATCH 2/2] hwmon: iio: Add labels from IIO channels
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v6 2/2] iio: frequency: adf4350: add clk provider
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: st-sensors: add LIS2DS12 accelerometer
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v6 3/3] iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: iio: adf4350: add clk provider prop
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad_sigma_delta: fix disable_one callback
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
• [PATCH] iio: adc: ad_sigma_delta: fix disable_one callback
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• RE: [PATCH v2 1/3] dt-bindings: iio: accel: add ADXL380
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: iio: accel: add ADXL380
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 3/3] docs: iio: add documentation for adxl380 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v2 2/3] iio: accel: add ADXL380 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: iio: accel: add ADXL380
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH v6 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v12 0/7] iio: new DMABUF based API v12
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v12 0/7] iio: new DMABUF based API v12
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v6 1/3] dt-bindings: vendor-prefixes: add tyhx
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: (subset) [PATCH v12 0/7] iio: new DMABUF based API v12
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [RFC] Patch review challenges
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RFC] Patch review challenges
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v6 3/3] iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v6 2/3] dt-bindings: iio: proximity: Add TYHX HX9023S
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v6 1/3] dt-bindings: vendor-prefixes: add tyhx
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v6 0/3] iio: proximity: Add TYHX HX9023S sensor driver
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: accel: add ADXL380 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/3] iio: accel: add ADXL380 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: drop stale Anson Huang from maintainers
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 2/2] hwmon: iio: Add labels from IIO channels
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• [PATCH 1/2] iio: Add iio_read_channel_label to inkern API
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• [PATCH 0/2] hwmon: iio: Add labels
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH] iio: xilinx-ams: Add labels
  • From: Sean Anderson <sean.anderson@xxxxxxxxx>
• Re: [PATCH v3 27/41] iio: imu: inv_icm42600: make use of regmap_clear_bits(), regmap_set_bits()
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH v4 6/6] iio: adc: Add support for AD4000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/6] iio: adc: Add support for AD4000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v12 0/7] iio: new DMABUF based API v12
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v12 0/7] iio: new DMABUF based API v12
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 4/8] mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v12 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: st-sensors: add LIS2DS12 accelerometer
  • From: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
• Re: [PATCH v12 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v12 0/7] iio: new DMABUF based API v12
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH 8/8] iio: adc: stm32-dfsdm: add scaling support to dfsdm
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v12 6/7] Documentation: iio: Document high-speed DMABUF based API
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• [PATCH v12 7/7] Documentation: dmaengine: Document new dma_vec API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v12 6/7] Documentation: iio: Document high-speed DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v12 5/7] iio: buffer-dmaengine: Support new DMABUF based userspace API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v12 4/7] iio: buffer-dma: Enable support for DMABUFs
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v12 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v12 2/7] dmaengine: dma-axi-dmac: Implement device_prep_peripheral_dma_vec
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v12 1/7] dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v12 0/7] iio: new DMABUF based API v12
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH 2/8] iio: add enable and disable services to iio backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 13/41] iio: adc: meson_saradc: make use of regmap_clear_bits(), regmap_set_bits()
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH 4/8] dt-bindings: iio: dfsdm: move to backend framework
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v3 3/3] drivers: iio: adc: add support for ad777x family
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• Re: [PATCH 4/8] dt-bindings: iio: dfsdm: move to backend framework
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• RE: [PATCH v4 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: "Paller, Kim Seer" <KimSeer.Paller@xxxxxxxxxx>
• Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 5/6] dt-bindings: iio: adc: Add AD4000
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v4 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 3/5] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adc: add a7779 doc
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 5/6] dt-bindings: iio: adc: Add AD4000
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v4 6/6] iio: adc: Add support for AD4000
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 3/8] iio: add child nodes support in iio backend framework
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH 2/8] iio: add enable and disable services to iio backend framework
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v4 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adc: add a7779 doc
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 5/6] dt-bindings: iio: adc: Add AD4000
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• RE: [PATCH v2] drivers: iio: adc: add support for ad777x family
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• Re: [PATCH v11 7/7] Documentation: dmaengine: Document new dma_vec API
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• [PATCH v3 0/3] ad777x driver addressing patch comments
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• [PATCH v3 2/3] Documentation: ABI: added filter mode doc in sysfs-bus-iio
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• [PATCH v3 0/3] ad777x driver addressing patch comments
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: adc: add a7779 doc
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• Re: [PATCH v11 6/7] Documentation: iio: Document high-speed DMABUF based API
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• [PATCH v3 0/3] ad777x driver addressing patch comments
  • From: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH v2 5/5] pwm-stm32: Make use of parametrised register definitions
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v2 3/5] counter: stm32-timer-cnt: Use TIM_DIER_CCxIE(x) instead of TIM_DIER_CCxIE(x)
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v2 4/5] mfd: stm32-timers: Drop unused TIM_DIER_CC_IE
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v2 1/5] mfd: stm32-timers: Unify alignment of register definition
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v2 2/5] mfd: stm32-timers: Add some register definitions with a parameter
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v2 0/5] mfd: stm32-timers: Make register definition more flexible
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• RE: [PATCH 3/3] docs: iio: add documentation for adxl380 driver
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• Re: [PATCH v1 2/2] dt-bindings:iio:proximity: Add hx9031as binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 2/2] dt-bindings:iio:proximity: Add hx9031as binding
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
• Re: [PATCH] iio:proximity:hx9031as: Add TYHX HX9031AS/HX9023S sensor driver
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings:iio:proximity: Add hx9023s binding
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
• [PATCH v4 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH v4 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH v4 3/5] dt-bindings: iio: dac: Add adi,ltc2664.yaml
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH v4 2/5] iio: ABI: add DAC 42kohm_to_gnd powerdown mode
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH v4 1/5] iio: ABI: Generalize ABI documentation for DAC
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• [PATCH v4 0/5] Add driver for LTC2664 and LTC2672
  • From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
• Re: [PATCH v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 8/8] iio: adc: stm32-dfsdm: add scaling support to dfsdm
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 3/8] iio: add child nodes support in iio backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 1/8] iio: add read raw service to iio backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/8] iio: add enable and disable services to iio backend framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 7/9] iio: adc: ad7606: switch mutexes to scoped_guard
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v4 6/6] iio: adc: Add support for AD4000
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 5/6] dt-bindings: iio: adc: Add AD4000
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 4/6] spi: spi-axi-spi-engine: Add support for MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 3/6] spi: spi-gpio: Add support for MOSI idle state configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 2/6] spi: bitbang: Implement support for MOSI idle state configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 1/6] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH v4 0/6] Add support for AD4000 series of ADCs
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: iio: adc: add common-mode-channel dependency
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: adc: add AD4695 and similar ADCs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 5/8] dt-bindings: iio: add sigma delta modulator backend
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 4/8] dt-bindings: iio: dfsdm: move to backend framework
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: iio: adc: add AD4695 and similar ADCs
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/4] mfd: stm32-timers: Unify alignment of register definition
  • From: Thorsten Scherer <T.Scherer@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: st-sensors: add LIS2DS12 accelerometer
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 4/9] dt-bindings: iio: adc: adi,ad7606: add supply properties
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
• [PATCH 7/8] iio: add sd modulator generic iio backend
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH 6/8] iio: adc: stm32-dfsdm: adopt generic channels bindings
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH 8/8] iio: adc: stm32-dfsdm: add scaling support to dfsdm
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH 0/8] iio: adc: dfsdm: add scaling support
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH 2/8] iio: add enable and disable services to iio backend framework
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH 4/8] dt-bindings: iio: dfsdm: move to backend framework
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH 3/8] iio: add child nodes support in iio backend framework
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH 5/8] dt-bindings: iio: add sigma delta modulator backend
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH 1/8] iio: add read raw service to iio backend framework
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH 5/9] dt-bindings: iio: adc: adi,ad7606: add conditions
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings:iio:proximity:new vendor prefix: tyhx
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
• Re: [PATCH v5 2/3] dt-bindings:iio:proximity: Add hx9023s binding
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
• Re: [PATCH 4/9] dt-bindings: iio: adc: adi,ad7606: add supply properties
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v5 5/6] iio: adc: ad7192: Add clock provider
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH 5/9] dt-bindings: iio: adc: adi,ad7606: add conditions
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 4/9] dt-bindings: iio: adc: adi,ad7606: add supply properties
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 6/9] dt-bindings: iio: adc: adi,ad7606: fix example
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v5 0/6] iio: adc: ad7192: Improvements
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH v5 2/6] dt-bindings: iio: adc: ad7192: Update clock config
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v5 4/6] dt-bindings: iio: adc: ad7192: Add clock provider
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v5 6/6] MAINTAINERS: Update AD7192 driver maintainer
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v5 4/6] dt-bindings: iio: adc: ad7192: Add clock provider
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v5 3/6] iio: adc: ad7192: Update clock config
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v5 2/6] dt-bindings: iio: adc: ad7192: Update clock config
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v5 1/6] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH 3/3] docs: iio: add documentation for adxl380 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 9/9] iio: adc: ad7606: fix standby gpio state to match the documentation
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 8/9] iio: adc: ad7606: fix oversampling gpio array
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 7/9] iio: adc: ad7606: switch mutexes to scoped_guard
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 5/9] dt-bindings: iio: adc: adi,ad7606: add conditions
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 6/9] dt-bindings: iio: adc: adi,ad7606: fix example
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 4/9] dt-bindings: iio: adc: adi,ad7606: add supply properties
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 3/9] dt-bindings: iio: adc: adi,ad7606: improve descriptions
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 0/9] iio: adc: ad7606: Improvements
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 1/9] dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 2/9] dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [PATCH v3 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 7/9] iio: imu: adis16480: make use of the new lock helpers
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2] iio: adc: ad7606: remove frstdata check for serial mode
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH 4/9] iio: gyro: adis16260: make use of the new lock helpers
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH 8/9] iio: imu: adis16475: make use of the new lock helpers
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH 6/9] iio: imu: adis16400: make use of the new lock helpers
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH 9/9] iio: imu: adis: remove legacy lock helpers
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH 2/9] iio: imu: adis: move to the cleanup magic
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH 5/9] iio: gyro: adis16260: make use of the new lock helpers
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH 3/9] iio: imu: adis: add cleanup based lock helpers
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH 1/9] iio: imu: adis_buffer: split trigger handling
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH 0/9] iio: imu: adis: make use the cleanup.h magic
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: iio: st-sensors: add LIS2DS12 accelerometer
  • From: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx>
• Re: [PATCH v3 33/41] iio: magnetometer: ak8974: make use of regmap_set_bits()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 3/3] iio:proximity:hx9023s: Add TYHX HX9023S sensor driver
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxxxx>
• [PATCH] dt-bindings: iio: stm32: dfsdm: fix dtbs warnings on dfsdm audio port
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH 2/3] iio: accel: add ADXL380 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH v3 35/41] iio: pressure: bmp280-core: make use of regmap_clear_bits()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: accel: add ADXL380
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH v3 02/41] iio: accel: kxsd9: Make use of regmap_clear_bits()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/3] docs: iio: add documentation for adxl380 driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• RE: [PATCH v3 5/5] iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
  • From: "Paller, Kim Seer" <KimSeer.Paller@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: drop stale Anson Huang from maintainers
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v11 2/7] dmaengine: dma-axi-dmac: Implement device_prep_peripheral_dma_vec
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v11 3/7] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v11 7/7] Documentation: dmaengine: Document new dma_vec API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v11 6/7] Documentation: iio: Document high-speed DMABUF based API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v11 5/7] iio: buffer-dmaengine: Support new DMABUF based userspace API
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v11 1/7] dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v11 4/7] iio: buffer-dma: Enable support for DMABUFs
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v11 0/7] iio: new DMABUF based API v11
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: frequency: adf4350: add clk provider
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v10 3/6] iio: core: Add new DMABUF interface infrastructure
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: adf4350: add clk provider prop
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH] iio: dac: adi-axi-dac: improve probe() error messaging
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v5 2/2] iio: frequency: adf4350: add clk provider
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: iio: adc: Add AXP717 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 3/8] power: supply: axp20x_battery: add support for AXP717
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/8] power: supply: axp20x_usb_power: Add support for AXP717
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: bmp280: fix bmp580 temp read
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 35/41] iio: pressure: bmp280-core: make use of
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v8 3/3] iio: pressure: bmp280: Add triggered buffer support
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v8 1/3] iio: pressure: bmp280: Generalize read_*() functions
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v8 2/3] iio: pressure: bmp280: Add SCALE, RAW values in channels and refactorize them
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>