On 02/09/2024 20:38, Alexandru Ardelean wrote:
> On Mon, Sep 2, 2024 at 2:55 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>>
>> On Mon, Sep 02, 2024 at 01:36:30PM +0300, Alexandru Ardelean wrote:
>>> reg:
>>> @@ -114,6 +118,25 @@ properties:
>>> assumed that the pins are hardwired to VDD.
>>> type: boolean
>>>
>>> +patternProperties:
>>> + "^channel@([0-7])$":
>>> + type: object
>>> + $ref: adc.yaml
>>> + unevaluatedProperties: false
>>> +
>>> + properties:
>>> + reg:
>>> + description: The channel number.
>>> + minimum: 0
>>> + maximum: 7
>>> +
>>> + diff-channels: true
>>
>> Shouldn't this be specific?
>
> Umm.
> Specific how?
> Like if:then check for certain compatible strings?
Ah, no, list is already constrained to two items. Then just drop it.
What's the point of listing it here?
>
>>
>>> +
>>> + bipolar: true
Same, drop.
>>> +
>>> + required:
>>> + - reg
>>> +
>>> required:
>>> - compatible
>>> - reg
>>> @@ -202,4 +225,44 @@ examples:
>>> standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
>>> };
>>> };
>>> + - |
>>> + #include <dt-bindings/gpio/gpio.h>
>>> + #include <dt-bindings/interrupt-controller/irq.h>
>>> + spi {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + adc@0 {
>>> + compatible = "adi,ad7606c-18";
>>> + reg = <0>;
>>> + spi-max-frequency = <1000000>;
>>> + spi-cpol;
>>> + spi-cpha;
>>> +
>>> + avcc-supply = <&adc_vref>;
>>> + vdrive-supply = <&vdd_supply>;
>>> +
>>> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
>>> + interrupt-parent = <&gpio>;
>>> +
>>> + adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
>>> +
>>> + adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
>>> + reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
>>> + adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
>>> + standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
>>> +
>>> + adi,sw-mode;
>>> +
>>> + channel@1 {
>>> + reg = <1>;
>>> + diff-channel;
>>
>> Where is this property defined (which schema)?
>>
>> Did you test it?
>
> Tested on my board.
How can you test a binding on a board?
> But forgot to update the DT schema docs.
> Though, if you're referring to testing it somehow via some make
> command, I'm a little behind on how all this works now.
> I'll go re-check the "make dtbs_check" and similar commands.
Please read carefully writing-schema and writing-bindings.
Best regards,
Krzysztof
