From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Use irq_get_trigger_type() to replace getting the irq data then the
type in two steps.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
drivers/iio/magnetometer/ak8974.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/magnetometer/ak8974.c b/drivers/iio/magnetometer/ak8974.c
index 961b1e0bfb13..8306a18706ac 100644
--- a/drivers/iio/magnetometer/ak8974.c
+++ b/drivers/iio/magnetometer/ak8974.c
@@ -910,7 +910,7 @@ static int ak8974_probe(struct i2c_client *i2c)
/* If we have a valid DRDY IRQ, make use of it */
if (irq > 0) {
- irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
+ irq_trig = irq_get_trigger_type(irq);
if (irq_trig == IRQF_TRIGGER_RISING) {
dev_info(&i2c->dev, "enable rising edge DRDY IRQ\n");
} else if (irq_trig == IRQF_TRIGGER_FALLING) {
--
2.46.0
