On Mon, Sep 02, 2024 at 08:42:20PM +0200, Vasileios Amoiridis wrote: > Add interrupt options for BMP3xx and BMP5xx devices as well. > > Signed-off-by: Vasileios Amoiridis <vassilisamir@xxxxxxxxx> > --- > .../bindings/iio/pressure/bmp085.yaml | 22 ++++++++++++++++++- > 1 file changed, 21 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml > index 6fda887ee9d4..20b75865e02f 100644 > --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml > +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml > @@ -48,14 +48,34 @@ properties: > > interrupts: > description: > - interrupt mapping for IRQ (BMP085 only) > + interrupt mapping for IRQ. Supported in BMP085, BMP3xx, BMP5xx > maxItems: 1 > > + drive-open-drain: > + description: > + set if the interrupt pin should be configured as open drain. > + If not set, defaults to push-pull configuration. > + type: boolean > + > + Just one blank liine. > required: > - compatible > - vddd-supply > - vdda-supply > > +allOf: > + - if: > + properties: > + compatible: > + not: > + enum: > + - bosch,bmp085 > + - bosch,bmp380 > + - bosch,bmp580 Are you sure you tested this patch? Best regards, Krzysztof
