Depends on this: https://lore.kernel.org/linux-iio/20240823172017.9028-1-vassilisamir@xxxxxxxxx Changes in v3: [PATCH v3 1/7]: - Moved the indexing enum on top of the calibration buffer and added a comment that the reason for the complex accesses can be found in the datasheet. [PATCH v3 2/7]: - Use dev_err_probe() instead of dev_err() since the .preinit function is called only from the probe. [PATCH v3 4/7]: - Made static the const int arrays. - Changed the comment from "future" versions to "newer" versions. - The current state of the board is saved into a variable in order to be able to be recovered after a suspend/resume operation. [PATCH v3 5/7]: - Corrected syntax error. [PATCH v3 6/7]: - Merged the bmp{3,5}80_trigger_probe() functions to one by using a general __bmp280_trigger_probe() which takes the sensor specific functions as interrupts. [PATCH v3 7/7]: - Fixed the bmp085_chip_info array by duplicating the bmp180_chip_info and just adding the extra variable for the bmp085 interrupt. v2: https://lore.kernel.org/linux-iio/20240725231039.614536-1-vassilisamir@xxxxxxxxx Vasileios Amoiridis (7): iio: pressure: bmp280: Use bulk read for humidity calibration data iio: pressure: bmp280: Add support for bmp280 soft reset iio: pressure: bmp280: Remove config error check for IIR filter updates iio: pressure: bmp280: Use sleep and forced mode for oneshot captures dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices iio: pressure: bmp280: Add data ready trigger support iio: pressure: bmp280: Move bmp085 interrupt to new configuration .../bindings/iio/pressure/bmp085.yaml | 7 +- drivers/iio/pressure/bmp280-core.c | 691 +++++++++++++++--- drivers/iio/pressure/bmp280-i2c.c | 4 +- drivers/iio/pressure/bmp280-spi.c | 4 +- drivers/iio/pressure/bmp280.h | 52 ++ 5 files changed, 667 insertions(+), 91 deletions(-) base-commit: 0f718e10da81446df0909c9939dff2b77e3b4e95 prerequisite-patch-id: e4f81f31f4fbb2aa872c0c74ed4511893eee0c9a -- 2.25.1
