On Sun, Sep 01, 2024 at 02:59:50PM +0100, Jonathan Cameron wrote:
> From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
>
> Use irq_get_trigger_type() to replace getting the irq data then the
> type in two steps.
>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> ---
> drivers/iio/pressure/bmp280-core.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
> index da379230c837..b156dd763cf3 100644
> --- a/drivers/iio/pressure/bmp280-core.c
> +++ b/drivers/iio/pressure/bmp280-core.c
> @@ -2596,7 +2596,7 @@ static int bmp085_fetch_eoc_irq(struct device *dev,
> unsigned long irq_trig;
> int ret;
>
> - irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
> + irq_trig = irq_get_trigger_type(irq);
> if (irq_trig != IRQF_TRIGGER_RISING) {
> dev_err(dev, "non-rising trigger given for EOC interrupt, trying to enforce it\n");
> irq_trig = IRQF_TRIGGER_RISING;
> --
> 2.46.0
>
Hi Jonathan,
Tested-by: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
