Depends on this: https://lore.kernel.org/linux-iio/20240823172017.9028-1-vassilisamir@xxxxxxxxx Changes in v4: [PATCH v4 1/7]: - Use better names and split value assignments for better readability. [PATCH v4 2/7]: - Move to fsleep() and add comment on top - Use appropriate return error value in bmp280_preinit() [PATCH v4 3/7]: - Split lines for logical and better readability [PATCH v4 4/7]: - Change style in static const array assignments - Use BIT() function instead of bit shifting - Change usleep_range() to fsleep() and add comments [PATCH v4 5/7]: - Add allOf:if in order to allow the interrupt in the device-tree only in sensors who support it. [PATCH v4 6/7]: - Change function pointer return type to irq_handler_t - Remove extra check in dev_fwnode() - Fix check in fwnode_irq_get() - Fix shadowed error check - Remove extra check in irq_get_irq_data(irq); - Improve indentation - Fix return values in certain cases - Fix identation and if checks [PATCH v4 7/7]: - Fix commit message Vasileios Amoiridis (7): iio: pressure: bmp280: Use bulk read for humidity calibration data iio: pressure: bmp280: Add support for bmp280 soft reset iio: pressure: bmp280: Remove config error check for IIR filter updates iio: pressure: bmp280: Use sleep and forced mode for oneshot captures dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices iio: pressure: bmp280: Add data ready trigger support iio: pressure: bmp280: Move bmp085 interrupt to new configuration .../bindings/iio/pressure/bmp085.yaml | 22 +- drivers/iio/pressure/bmp280-core.c | 692 +++++++++++++++--- drivers/iio/pressure/bmp280-i2c.c | 4 +- drivers/iio/pressure/bmp280-spi.c | 4 +- drivers/iio/pressure/bmp280.h | 52 ++ 5 files changed, 684 insertions(+), 90 deletions(-) base-commit: 0f718e10da81446df0909c9939dff2b77e3b4e95 prerequisite-patch-id: e4f81f31f4fbb2aa872c0c74ed4511893eee0c9a -- 2.25.1
