On Tue, 20 Aug 2024 10:58:34 -0500 David Lechner <dlechner@xxxxxxxxxxxx> wrote: > This series adds calibration support to the ad4695 driver. > > This has the same "odd" gain and offset registers that are being used > for calibration as discussed recently in the ad4030 series [1]. So if > the ranges in the *_available attributes seem a bit big for calibration, > that is why. The official datasheet explanation for this feature is, > "The AD4695/AD4696 include offset and gain error correction > functionality to correct for first-order nonidealities in a full > [analog front end] signal chain." > > [1]: https://lore.kernel.org/linux-iio/20240814193814.78fe45cc@jic23-huawei/ Series LGTM Applied to the togreg branch of iio.git and pushed out as testing. Note I'll be rebasing after the previous pull request (hopefully) gets picked up by Greg. Jonathan > > --- > David Lechner (4): > iio: adc: ad4695: add 2nd regmap for 16-bit registers > iio: adc: ad4695: implement calibration support > doc: iio: ad4695: update for calibration support > iio: ABI: document ad4695 new attributes > > Documentation/ABI/testing/sysfs-bus-iio | 3 + > Documentation/iio/ad4695.rst | 7 +- > drivers/iio/adc/ad4695.c | 242 +++++++++++++++++++++++++++++--- > 3 files changed, 234 insertions(+), 18 deletions(-) > --- > base-commit: 0f718e10da81446df0909c9939dff2b77e3b4e95 > change-id: 20240819-ad4695-gain-offset-c748d7addf27 > > Best regards,
